Best Bushing Washer

Penn State Industries PKSP105A 7mm Pen Kit Bundle #1 Woodturning Project

  • This is a woodturning project kit. Pen hardware, selected bushing sets, and wood blanks only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. 7mm drill bit (PK-7MM), standard 7mm slimline bushings (PKM-BUSH3) and all other turning tools and supplies are not included..
  • Includes (8) 7mm Ballpoint Twist Pen Kits, (3) Compatible Bushing Sets, and (10) 5/8" x 5/8" x 5" Cocobolo Wood Blanks (WX01-1).
  • You will receive (1) of each of the following penturning kits: Premium Slimline in Gold (PK-PEN), Premium Slimline in Brushed Satin (PK-PENSAT), Premium Comfort in Gold (PKCFPEN), Premium Comfort in Brushed Satin (PKCFPENS), Designer in Gold (PKMONT224), Designer in Brushed Satin (PKMONT2S), Trimline in Gold (PKXM24), Trimline in Gun Metal (PKXMGM).
  • You will receive the following (3) Compatible Bushing Sets: PKCFBUSH, PKXMBU, and PKMONT2-BU.
  • Not included: Standard Slimline 7mm Bushing Set (PKM-BUSH3) needed for the Premium Slimline Kits or the 7mm drill bit (PK-7MM) needed to make all the kits.
Check Stock

FreeTec 52-in-1 Custom Bushing Driver Set, Bearing and Seal Driver Transmission Bushing Removal Puller Bearing Press Tool Kit

  • Package contains: you will receive 6 pieces reducing bushing adapters in 3 sizes thick bench grinding wheels, enough for your daily use and replacement.
  • 3 Sizes included: the length of 6 pieces reducing bushing adapters is the same size, which is suitable for thick bench grinding wheels.
  • 2 Pieces ID 1/2 inch x OD 5/8 inch, 2 pieces ID 5/8 inch x OD 3/4 inch and 2 pieces ID 3/4 inches x OD 1 inch, 3 sizes would be provided for you.
  • Quality material: the reducing bushing adapters are made of quality stainless steel, rust-prevention and hard, could apply for a long time.
  • Nice performance: the reducing bushing adapters are easy and simple to be applied, which will not be deformed or broken easily.
  • For effective operation: these adapters of various sizes can be operated with a bench grinder for variable operation, but also improve your working efficiency.
Check Stock

Martin 2517 1 1/2 Taper Bushing, Sintered Steel, Inch, 1.5\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 1008 5/8 Taper Bushing, Sintered Steel, Inch, 0.62\ Bore, 1.386\ OD, 0.875\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Marker Duke PT 16 125 Ski Binding Adults

  • Convenient solution - this shift cable bushing assortment directly replaces a broken bushing and eliminates the need to replace the entire cable assembly.
  • Save time and money - save the expense and significant installation time of replacing an entire cable assembly.
  • Ensure fit - this bushing assortment is vehicle-specific and precision-engineered for specified General Motors, Chrysler and Saab models and years.
  • Trustworthy quality - designed in the United States and backed by more than a century of automotive aftermarket excellence.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Saw Blade Bushing Set Saw Blades Adapter Ring Aperture Conversion Gasket , 1Inch to 20mm, 1inch to 5/8Inch, 7/8Inch to 5/8Inch, 20mm to 5/8Inch, 5/8Inch to 1/2inch, 1.25Inch to 7/8Inch, Pack of 12

  • ...lade to echo trimmer. These did the trick to center the blade to the trimmer. Used for adjustment and conversion of alloy saw blades and other mounting holes becoming smaller. It is suitable for saw blade/marble blade inner hole conversion, angle grinder and cutting machine..
  • 12pcs Saw Blade Bush / Spacer, Saw Blade Bushing Washers, There are two pieces of each size, Total of 12 pieces.
  • VIP after-sales service guarantee: fast refund and exchange. Professional delivery facilities and professional delivery personnel will prevent the loss of goods, and the goods will reach you safely and quickly..
Check Stock

Martin 2517 2 7/16 Taper Bushing, Sintered Steel, Inch, 2.44\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2517 1 1/4 Taper Bushing, Sintered Steel, Inch, 1.25\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2012 1 5/8 Taper Bushing, Sintered Steel, Inch, 1.63\ Bore, 2.75\ OD, 1.25\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2012 1 1/8 Taper Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.75\ OD, 1.25\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock