Best Butterfly Damper

Honeywell ARD8TZ Round Automatic Damper, 8'

  • Features galvanized steel with single-blade damper, which closes off tightly against gasket for minimal leakage.
  • Designated as power closed/spring return open damper for use with Honeywell Zoning Systems.
  • Can be field-converted when used as an independent zone or for fresh air intake.
Check Stock

Vent Systems 8 Inch Backdraft Damper - Backflow Shutter - Heavy-Duty Inline Springs Loaded - One-Way Airflow Ducting Insert - Inline Fan Vent Deflector

  • Back draft damper for insertion into 8 inch ventilation ducts. The backflow damper opens and closes automatically. It has a strong spring and can be....
  • A tight sealing and fastening of the duct is achieved by the rubber strip attached to the inside of the draft blocker damper. The rubber seal prevents....
  • Designed for use in AC, dryer vent, exhaust, extractor or range hoods, heating systems, fans, vents and other residential, commercial and industrial....
  • Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves....
  • The backflow Preventer valve is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be....
Check Stock

JXCOMEE Blacksmith Forge Blower Farriers Coal Forge Electric Blower (Outlet:3'')

  • 3" Inch Coal forge blower approx.180CFM,could regulate CFM Through the damper.
  • Highly popular with forge builders,it works for all situations..
  • Suitable for all forge tool and any coal forge.
  • Easy to hook up and operation ,Damper ajustable to control the Air volume.
  • Better Control on Airflow for Coal forge.
Check Stock

Honeywell ARD10TZ/U Automatic Damper, Round, 10' Diameter

  • Features galvanized steel with single-blade damper, which closes off tightly against gasket for minimal leakage.
  • Designated as power closed/spring return open damper for use with Honeywell zoning systems.
  • Can be field-converted when used as an independent zone or for fresh air intake.
  • Available in 5- to 10-inch, 12-, 14-, 16-, and 18-inch diameter sizes.
Check Stock

CXRacing Coilover Suspension For 1986-92 TOYOTA Supra MK3 III Pillow Ball Mount

  • CXRacing Damper CoilOver Suspension Kit with Pillow Ball Mounts.
  • for 87-92 TOYOTA Supra MK III (Don't fit AWD Model).
  • Pillow Ball Mount, 32 Step Damper & Ride Height Adjustable.
  • Street Sport Spring Rate: Front 14KG(781 lb/in) / Rear 10KG(558 lb/in).
Check Stock

Broan-NuTone RDF1 Premium Radiation Damper For Ventilation Fans, Compatible with Broan-NuTone Exhaust Fans, Steel Frame, 10.8" x 2.9" x 11.6"

  • HIGH-QUALITY DAMPER: Premium radiation damper for use in 1, 2, and 3 hour rated floor-ceiling and roof-ceiling constructions.
  • DURABLE: Features a galvanized steel frame construction and stainless steel closure springs for long lasting use.
  • OUTER FRAME: Separate outer frame allows complete fan and damper serviceability without disturbing the surrounding ceiling material.
  • FEATURES: Includes a high temperature, non-asbestos, reinforced thermal fabric and 165°F fusible link for your convenience.
  • COMPATIBLITY: Designed for use with Broan-NuTone LP80, LP110, RB80, RB110, XB50, XB80, XB110, ZB80, ZB110, and NuTone LPN80, RN80, RN110, XN50, XN80, XN110, ZN80, ZN110, XN50C, XN90C, XN110C, ZN90C, ZN110C.
Check Stock

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

  • FITMENT: Harmonic Damper Pulley Holder works on Toyota 3.4L V6 Tacoma 1996-2004, 4 Runner 1996-2002, Tundra 2000-2004, T100 pickup 1996-1998.
  • Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
  • HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
  • and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pull....
Check Stock

Decor Grates AJH410-NKL Floor Register, 4 x 10, Nickel

  • Oriental steel plated – Brushed Nickel Finish floor register.
  • Easy to install – Just drop into vent – no tools required.
  • Metal damper boxes rust and seize up, so we make our damper boxes with high impact plastic. This is not a cheaper option, it’s the best option.
  • Available in a variety of styles and finishes to match any decor.
  • Filter retainer and filter are sold separately.
Check Stock

E-cowlboy for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with 2PCS Crank Bolts

  • FITMENT INFORMATION - Work for Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. also 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
  • KEEP CRANK PULLEY STILL - Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines.
  • ROUND EDGE WITH PRECISION FIT HOLE - Small enough so that no need to remove radiator or other components to access and remove Harmonic Damper Pulley, hole in center of tool allows access to removal of crank shaft bolt, users are available to hold crankshaft while tightening the crank bolt with a torque wrench.
  • PACKAGE INCLUDED - 1 crankshaft damper pulley holding holder tool and 2 crank bolts.
  • 100% SATISFACTION GUARANTEE - If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days, no questions asked money back guarantee with 1 year’s warranty.
Check Stock

Fox Shox Air Shaft Assembly, 36 Rhythm, 160mm, 1.275\ Bore

  • The new Charger 2.1 damper upgrade kit allows the fork to ride higher in the travel on compression while keeping the tires planted to the ground for unmatched control..
  • Performance that is simply second to none.
  • Charger 2.1 RCT3 damper featuring 3-position compression adjust (open/pedal/firm) with low speed compression adjust.
Check Stock