Best Cab mounted Bed Rails

LEER HF650M | Fits 2020-2022 GM Chevy Silverado/GMC Sierra Heavy Duty 2500/3500 with 6.9 FT Bed | Hard, Quad-Folding, Low Profile Tonneau Cover | SKU 650320

  • FITS PERFECT/EASY TO LATCH – LEER’s industry exclusive CYNC latching system allows easily opening the cover with two fingers from either side of the truck bed. Latches with open or closed tailgate..
  • SLEEK LOOK – The patented HF650M Hard Folding Cover has a sleek, 12MM low-profile design with thinner rails, allowing for a true flush mount and more cargo space inside the bed..
  • FOUR LIGHTWEIGHT PANELS - The HF650M offers ultimate flexibility with four lightweight, durable, dent-resistant panels made of fiberglass reinforced plastic polymer. When opened, the quad-fold design keeps the third brake light and window visible and protects the back of your cab and window by locking into position away from the cab. 450 lbs. evenly distrusted load rating..
  • NO-DRILL INSTALLATION – With an easy and fast installation process, the HF650M comes with the tools and instructions to install your tonneau. This allows you the ability to easily take your cover off or put it back on..
  • THREE YEAR LIMITED WARRANTY - The HF650M from LEER comes with a 3-Year Limited Warranty. Warranty is valid only on products that are sold and/or shipped by Leer Tonneau Covers..
Check Stock

Attisstore Hard Hat Holder for Truck Seat, Back Seat Hat Racks - Over the Seat or Headrest Wire Rack for Construction Utility

  • Add additional storage space above the bed and cab for ladders, conduit, wood, and more.
  • Over cab design prevents damage to cab from cargo with 5" guard rails for added security.
  • Quick and easy no-drill clamp-on installation with a removable rear bar for taller cargo.
  • Durable, powder-coated steel with an 800 lb. weight capacity.
  • Adjustable width fits most pickup truck beds from 49" to 64" wide.
Check Stock

Lund Genesis Elite Roll Up Soft Roll Up Truck Bed Tonneau Cover | 96892 | Fits 2014 - 2018 Chevy/GMC Silverado/Sierra 5' 9\ Bed (69.3\)

  • Fits 2014 - 2018 Chevy/GMC Silverado/Sierra 5' 9" Bed (69.3").
  • PREMIUM MATTE CANVAS | Premium twill-weave textured material tops this soft roll-up truck bed cover and engineered to be resistant to water, mold, mildew, UV, dirt & dust. Simply, rinse with water and hit the road - no special cleaners required.
  • EASY BED ACCESS | Entry to your truck bed and gear has never been easier. This roll-up cover opens at just the driver's side of your truck and rolls up neatly against cab in seconds, allowing access to every inch of your truck bed and your cargo.
  • LUND PROMISE | Extreme seals to keep bad weather out, hassle-free tension control to keep your cover tight, & low profile, good looks are what you can expect with any Lund tonneau cover.
  • and is exactly what you'll get with Genesis Elite Roll-Up.
  • INSTALL & GO | From box to truck in under 20 minutes! Sturdy aluminum rails mount quickly without drilling or special tools required. Best of all – this roll-up truck bed cover is backed by a limited lifetime guarantee, with a US based support team.
Check Stock

TruXedo Sentry CT Hard Rolling Truck Bed Tonneau Cover | 1549816 | Fits 2015 - 2022 Chevy/GMC Colorado/Canyon 5' 3\ Bed (62.7\)

  • Fits 2020 - 2022 Chevy/GMC Silverado/Sierra 2500/3500 6' 10" Bed (82.2").
  • UNRIVALED SECURITY | The Revolver X2 features patented rotational locking rails to secure the cover the entire length of the bed, cab and side-rail seals, as well as an integrated latching mechanism to lock the cover with the tailgate.
  • UNRIVALED DURABILITY | The RX2 hard rolling truck bed cover is constructed with a gloss vinyl material overlaying a sheet of durable aluminum slats capable of withstanding up to 400 lbs. of evenly distributed weight.
  • UNRIVALED CONVENIENCE | The RX2 releases with a hidden cable on either side of the truck bed. It rolls up tight against the cab and is secured by integrated buckles for full bed access, 3rd brake light visibility, and 5th wheel compatibility.
  • UNRIVALED SUPPORT | The BAK Revolver X2 hard rolling tonneau cover is proudly made in the USA with globally sourced materials. The RX2 is backed by a US-based customer support team and a 3-year guarantee.
Check Stock

BAK Revolver X2 Hard Rolling Truck Bed Tonneau Cover | 39213 | Fits 2009 - 2018, 2019 -2021 Classic Dodge Ram 1500, 2010-21 2500/3500 6' 4\ Bed (76.3\)

  • Fits 2009-2018, 2019-21 Classic Dodge Ram 1500, 2010-21 2500/3500 6' 4" Bed (76.3").
  • UNRIVALED SECURITY | The Revolver X2 features patented rotational locking rails to secure the cover the entire length of the bed, cab and side-rail seals, as well as an integrated latching mechanism to lock the cover with the tailgate.
  • UNRIVALED DURABILITY | The RX2 hard rolling truck bed cover is constructed with a gloss vinyl material overlaying a sheet of durable aluminum slats capable of withstanding up to 400 lbs. of evenly distributed weight.
  • UNRIVALED CONVENIENCE | The RX2 releases with a hidden cable on either side of the truck bed. It rolls up tight against the cab and is secured by integrated buckles for full bed access, 3rd brake light visibility, and 5th wheel compatibility.
  • UNRIVALED SUPPORT | The BAK Revolver X2 hard rolling tonneau cover is proudly made in the USA with globally sourced materials. The RX2 is backed by a US-based customer support team and a 3-year guarantee.
Check Stock

extang Trifecta 2.0 Soft Folding Truck Bed Tonneau Cover | 92590 | Fits 2017 - 2023 Honda Ridgeline 5' Bed (60\)

  • Fits 2017 - 2023 Honda Ridgeline 5' Bed (60").
  • KEEP IT SIMPLE | Easy to install & easy to operate. Two EZ-Lock clamps located at the tailgate keeps cover locked. Pull down each clamp, fold cover twice, buckle to the cab & go. Entire cover can be easily removed in minutes to haul that brand new sofa.
  • DURABLE TARP COVER | Trifecta 2.0 is constructed with a leather-grain fabric built to deflect water and guard your truck bed from the elements. This marine grade material is fade resistant with excellent tension. Tackle the highway without any flutter!.
  • FASTEST INSTALL | This soft-folding cover comes fully assembled. Simply square up the cover to your truck & tighten the two cab clamps to the bed wall. No rails to fuss about & no special tools needed. Takes longer to remove from the box than to install.
  • EXTANG ENGINEERED | Engineering is at the heart of why we have the most complete offering of truck bed covers in North America. We are committed to bringing products to the market that will enhance the utility, convenience, and appearance of your truck.
Check Stock

TruXedo TruXport Soft Roll Up Truck Bed Tonneau Cover | 292101 | Fits 2000 - 2004 Nissan Frontier Crew Cab 4' 8\ Bed (56.3\) , Black

  • ...ATHER | Keep your cargo dry and secure during all weather situations. Pre-set tarp tension keeps cover tight and leaves water out. TruXport's support bows allow it to withstand several inches of snow when closed.
  • NO DRILL INSTALLATION | Fully install this roll-up truck bed cover in under 30 minutes! Easily clamp the rails onto your truck bed, attach the cover, roll and go. No drilling or special tools necessary.
  • WE'VE GOT YOU COVERED | TruXport is backed by a 5-year, no hassle warranty. We are committed to providing you the best service at all times, if you need replacement parts simply call our team.
  • UNBELIEVABLY FUNCTIONAL: TruXport was designed to be exceptionally easy to use.
  • To open, simply unlock each tailgate latch & roll to the cab, securely buckle & hit the road. Added benefit to this roll-up truck bed cover, remove in seconds & without tools.
  • DISTINCTIVE GOOD LOOKS: This roll-up cover sits 1.5" above the truck bed adding to the overall look of your vehicle.
  • It is equipped with quality black leather fabric that is easy to clean and will not fade over time. Tight to the bed and will not flutter.
  • STAND GUARD AGAINST WEATHER: Keep your cargo dry and secure during all weather situations.
  • Manually adjust the tarp tension to keep cover tight and water ....
Check Stock

Thule XSporter Pro Shift Truck Rack

  • Sliding racks* adjust to the length of the bed to carry different loads up to 600 pounds.
  • Thule TracRac Base Rails are required (sold separately), providing drill free installation and secure into the truck stake pockets.
  • Ideal rack height (18”) allows for easy truck bed access and sits below cab of truck for improved aerodynamics.
  • Compatible with retractable tonneau covers (see fit guide).
  • Theft resistant system locks rack to base rail (locking knobs included).
Check Stock

INEXRUD Fiberglass Plastic Hard Tri Folding 4'6\ / 54\ Truck Bed Cover Compatible For 2022 2023 Ford Maverick Tonneau Cover

  • Truck Fitment: Compatible For 2022-2023 Maverick Truck Bed Size:4'6"/54".
  • Pls Confirm The Truck Bed Size or Contact Us Before Ordering!.
  • Easy Install and Simple Operation: Cover Placed On Top Of The Bed Rails,With Quickly Clamps To Fix.No Drilling,Only Needs 15-20 Minutes for installation,Need To Remove Any Accessories On The Bed Rails Such As Cargo Rack Before Installation.
  • Simple Usage by Pushing Or Pulling The Handle Clamps, And Folding Or Unfolding The Tarp.Noted:The First Panel Near The Cab Can't Folding Or Stand Up..
  • Inventory: Hard FRP Tri Fold Tonneau Cover Assembly,Full Set of Installation And Replacement Kits And Instruction Manual,1pcs Free Motion Sensor Led Light.
  • Cover Features: Panels Made Of excellent Fiberglass Reinforced Plastic surface with PP honeycomb.
  • Rails/Frame:Made Of 6063 T5 Aircraft Grade Alu Alloy.FRP material is Light weight,high-intensity,Anti-impact/vibration and more scratch resistant than aluminum alloy,and has higher compressive strength. excellent performance in water proof/Anti-moisture,strong resistance to chemicals/corrosion,easy to clean the surface..
  • Quality & Service: 3 years Against Defects In Materials And Workmanship Under Its Intended Use.Pls Contact With Our Professional Service Team If You Are Not Sure About T....
Check Stock

extang Trifecta 2.0 Soft Folding Truck Bed Tonneau Cover | 92636 | Fits 2019 - 2023 Ford Ranger 5' 1' Bed (61')

  • Fits 2019 - 2023 Ford Ranger 5' 1" Bed (61").
  • KEEP IT SIMPLE | Easy to install & easy to operate. Two EZ-Lock clamps located at the tailgate keeps cover locked. Pull down each clamp, fold cover twice, buckle to the cab & go. Entire cover can be easily removed in minutes to haul that brand new sofa.
  • DURABLE TARP COVER | Trifecta 2.0 is constructed with a leather-grain fabric built to deflect water and guard your truck bed from the elements. This marine grade material is fade resistant with excellent tension. Tackle the highway without any flutter!.
  • FASTEST INSTALL | This soft-folding cover comes fully assembled. Simply square up the cover to your truck & tighten the two cab clamps to the bed wall. No rails to fuss about & no special tools needed. Takes longer to remove from the box than to install.
  • EXTANG ENGINEERED | Engineering is at the heart of why we have the most complete offering of truck bed covers in North America. We are committed to bringing products to the market that will enhance the utility, convenience, and appearance of your truck.
Check Stock