Best Cable Adapter Kit

Yecaye No Drill Under Desk Cable Management Tray - Clamp Install Desk Cord Organizer Rack - No Damage to Tables Cable Wire Management - Sturdy Metal Cable Tray Basket for Office Home - Pack of 2

  • ...holes no mess behind. Ideal for any office desks and standing desks within 0.4-2.3in thick and can be easily removed and reinstalled..
  • 2-Minute Installation to End Messy Cables: Just use the clamps, no screws or adhesives needed to set up Yecaye under desk wire management no drill. Easily organize loose power strip, adapter and data cords to tidy and beautify your home office. Everything will be kept clean, off the ground and away from your feet. No cable mess and no tripping hazards. Streamline your workstation and boost productivity with the cable racks..
  • Easy to Route Cables: Thanks to an open-wired design, clamp-on desk cord organizer allows different cables/plugs go through the holes instead of going around the entire tray to reach the powder sources and devices. It’ll be easy to add or remove cables at any time. And all the cables are well ventilated to prevent heat-related malfunctions and reduce dust buildup..
  • 10LBS Load-bearing Capacity: 100% made of solid metal, the cable management under desk tray no drill is robust, durable, and can hold up to 10lbs. Comes with a set of 2 wire trays, each at L15.7"(40cm) x W4"(10cm) x H4"(10cm), which can hold most surge protectors, adapter and desk cables..
  • All You Need in the Kit: Your under desk cable co....
Check Stock

DS18B20 Temperature Sensor Module Kit with Waterproof Stainless Steel Probe for Raspberry Pi

  • Simplify connecting a waterproof temperature sensor to your project with this adapter module kit.
  • Pull-up resistor included on the adapter module, an external resistor is not required to connect directly to the GPIO of the Raspberry Pi.
  • Waterproof digital temperature sensor DS18B20 on 100cm cable with adapter module.
  • Measure the temperature directly in water or soil.
  • DS18B20 Wiring: Red = VCC, Yellow = Data, Black = GND.
Check Stock

ALLmeter USB 2.0 Audio/Video VHS to DVD Converter Capture Card Digital Format Scart Kit for VHS, VCR, DVD, TV, DV

  • Record any video device with RCA connector or S-Video connector, such as VHS, VCR, DVD, TV, DV, analog camcorder, camera and games consoles..
  • Use this complete kit to cheaply transfer your old VHS recordings to PC and burn to DVD. Protect your precious memories from old camcorder tapes. Record your videogames exploits.
  • This is bundled with an RCA to RCA Cable and a Scart to S-Video or RCA Adapter, you can record video/audio from many different devices, these include: VHS, DVD, Video Camera.
  • Package incluede 1 x USB Video Capture Device with Composite & S-Video Female Inputs 1 x Software CD 1 x Scart to RCA/S-Video Adapter 1 x RCA to RCA Cable 1 x USB Cable 1 x User Manual.
Check Stock

PrimePoster - Dead Space 2 Poster Glossy Finish Made in USA - YDSP003 (24" x 36" (61cm x 91.5cm))

  • Remote Control Light KitThis LED light kit is specially compatible with Lego 76191 Infinity Gauntlet Collectible Building Kit. Use this light kit to make the Infinity Stones Shinning and unique.Make the best view sight for your model..
  • ★LED Lights Set for Sale without Model★Please warmly noticed that only the light kit is for sale and the blocks are not included in the package. All the blocks models showed in the pictures are for your reference..
  • ☀High-quality Material☀ All LEDs have an uniform light pattern and the cable connectors fit nicely together. The Inner Copper lines featuring anti-heat and anti- burning can prolong their service time for you..
  • ✔USB Power Connection✔Very convenient power supply method. You can connect the USB cable with a power bank, a laptop, an USB-socket or an wall adapter..
  • ✿Cool Gift Choice✿ This Decoration Light Kit would be a great birthday gift, holiday present for any model-making enthusiast or adult fan of the Marvel films..
Check Stock

AIBOO LED Under Cabinet lighting Kit, Plug in Strip Lights with Dimmer Switch for Kitchen Cabinet Counter, Closet, bedroom lighting.(24w-8 bars kit-6000K)

  • @DIMMABLE: led light bar has In-line switch on the LED driver cable helps turn on/off cabinet strip lights bar easily. The under cabinet lights could be dimmable from 0% to 100% as well, just rotate the LED dimmer switch achieve it..
  • @Mounted on anywhere: 12V dimmable LED light Bar could be attached on anywhere for the kitchen, closet, shelf or display counter lighting, no worry the outlet is in the center of the counter, the 2 in 1 splitter assist the cabinet light bar kit split into two..
  • @Premium Cabinet Light Fixture Kit: High quality certified adapter with US standard plug, licensed electrician can cut off the US plug and hardwire it to an ON/OFF switch. Furthermore the power adapter with 1.5m cable, it’s longer than others..
  • @Super Bright: 2000LM daylight white led light bar, the whole set around 24W power, as a replacement for traditional light, its CRI003e80 super bright, it’s a perfect choice for your home lighting at kitchen, closet, shelf, display counter, showcase..
  • @Installation by yourself: Sufficient strong acrylic stickers, screws, wire clips, 2 in 1 splitter with Interconnect wires total in 1.8m,long enough extension cords(15cm and 50cm)will help you finish this led under cabinet lighting bar kit quickly and easily..
Check Stock

Raspberry Pi 7 Touchscreen Display

  • This 7" Touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the....
  • The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers..
  • Only two connections from the Pi TO the Display are necessary.
  • power from GPIO (or USB) connection to the DSI port. The adapter board handles power,....
  • Kit contents: 7" Touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires.
Check Stock

onelinkmore BNC to UHF 4 Type RF Connector Kit Coaxial BNC Male Female to UHF Male Female RF BNC UHF Radios Adapter Kit for Antennas Wireless LAN Devices Coaxial Cable Wi-Fi Radios External Antenna…

  • Connector Type : BNC Male Female to UHF Female Male adapter, PL259 SO239 connectors to BNC. Helping you connect with BNC to UHF Device and Cable, Easy....
  • The attenuates signal of this BNC to UHF adapter is less than 0.1db. VSWR< 1.15(DC-1G). Made of premium material for higher signal transmission and....
  • PL259 Male SO-239 Female to BNC Adapters,made of brass copper body and teflon insulator for a good connectivity and reliable signal every time. Heavy....
  • BNC PL259 SO239 Adapter Kit Application for Antennas, Wireless LAN Devices , Coaxial cable, Wi-Fi Radios External Antenna and so on.
  • Package Content : 4 x BNC to UHF Adapter Kits.
Check Stock

Comcast Xfinity Cable Digital Transport Adapter Dc50xu Box Only, No Power Supply. No Remote.

  • Comcast Digital Transport Adapter DTA DC50Xu.
  • Includes: DTA unit, remote w/batteries, remote sensor & attachment pads, coax cable & power adapter.
  • Check with Comcast before purchase for compatibility and usage!.
Check Stock

WeldingCity 150-amp WP-17FV Flexible Head w/Gas Valve Air-cooled TIG Welding Torch Complete Package with 25-ft Power Cable Hose and Dinse 35-50 Solid 1/2 -pin Cable Adapter with Separate Gas

  • Premium quality 150-amp air-cooled WP-17 complete TIG welding torch package with 12.5-ft and 25-ft 1-piece EPDM rubber power cable. Shipped as un-assembled..
  • 12-pcs torch package includes: 150-amp air-cooled WP-17 series high quality silicone rubber torch body with handle, 1-piece type EPDM rubber power cable hose 57Y01R (12.5-ft) or 57Y03R (25-ft), Nylon cable cover with zipper.
  • Dinse 35-50mm solid 1/2"-pin adapter with separate gas hose and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps)..
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-17 (regular), WP-17F (flexible head), WP-17V (head with gas valve) and WP-17FV (flexible head with gas valve)..
  • Dinse 35-50mm solid 1/2"-pin cable adapter with separate gas hose and 3/8-24R female rear to adapt WP-17 torch cable. Dinse-type 35-50mm solid adapter (compatible with Miller/Lincoln reference # 195378/K960-1) for use with all mainstream welders on markets, as well as ideal replacement for many other aftermarket or equivalent welders. CHECK ALL PICTURES AND YOUR TIG WELDER FOR MATCHING..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Generic Brand for Samsung Wireless LAN Adapter - Model: WIS12ABGNX

  • Suitable Generic Alternative to Samsung Linkstick WIS09ABGN WIS12ABGN or AK40-00051A.
  • Newly Designed Model Provides Stable Data Speeds of up to 300Mbps. Ideal for Streaming HDTV content to your Compatible TV.
  • USB Wi-fi Dongle Supports 2.4Ghz and 5Ghz Frequencies for Accurate Connection.
  • Kit Includes Adapter, 2.5FT USB Extension Cable, USB Swivel Adapter and Micro Pouch..
Check Stock