Best Cable Railing Kits

Sowtowe Cable Railing Hardware, 20 Pairs Stainless Steel Cable Railing Kit,for 3/16 Cable Railing System, Adjustable Angle,T316 Marine Grade

  • Fit for 3/16 cable railing,This adjustable angle cable railing kit can be freely adjusted between 0 and 180 degrees, suitable for outdoor or indoor use.
  • The railing kit is made of high quality marine grade T316 stainless steel Thick Plate, which is rust-proof, durable and beautiful and easy to maintain.
  • This kit needs to be connected to the cable using a hydraulic crimping machine, it can be used for deck railing and garden fences, inclined stair railing or horizontal cable guardrail.
  • Cable railing hardware Kit, can be used in cable railing systems of various angles, for wood post and metal post,3/16" inner diameter, ideal for connecting to 3/16 inch stainless steel cable to wood post and metal post.
  • This product includes 20 Pcs Deck Toggle Turnbuckles, 20 Pcs Deck Toggle Ends and 82 Pcs (2 spare) of stainless steel countersunk head screws and 1 pcs drill bit for wooden post, 1 pcs tightening rod, 1 multifunctional small wrench..
Check Stock

Ingpro 80 Pack 316 Stainless Steel Left&Right Handed Thread Swage lag Screws for 1/8\ Decking Cable Railing Kit/Hardware,Wood Post Balusters (40 Pairs)

  • This cable railing kit(Single lag screw) made of high quality Marine Grade T316-Stainless Steel,It is anti-rust、 durable and easy to maintain;.
  • The angle of this professional Single-Screw cable railing hardware 0 to180 degrees could be free adjusted;So they can be used to all kinds of complex cable railing system:railing of stairs,deck railing and Garden fence…;.
  • This cable railing hardware applies to standard 1/8" inch cable(OD), Hydraulic crimper is required to connect this kit with the cable and the 4-6# dies is suitable.
  • The length of the screw is 2 inch, Pre-drilling screw holes is required before installation;The turnbuckle fully extended length is 10 inch and fully shortened length is 6-3/4 inch (Size details are shown in the figure).
  • This kind of cable railing fitting advantage:high quality、easy to install and looks clean..
Check Stock

Yaheetech Patio Deck Tiles Interlocking Wood Composite Deck Wooden Flooring Deck Tiles 12 x 12in Fir Wood Indoor&Outdoor Brown 55pcs

  • Specially for End Post - This cable railing kit is a great solution for posts up against a wall that you can't reach from behind, also ideal for single drilled end posts and corner posts to realize one-post corner solution. This deck railing hardware is installed by simply inserting it into the hole of drilled post and flipping the toggle.
  • Multi-Angled and Wide Adjustment - This tension wire kit can be rotated from 0-180 degrees for both horizontal and angled sections. This turnbuckle also has a wide adjustable range of up to 40ft in a straight run, making it much easier for beginners to install a cable railing system.
  • High Quality- The cable railing kit is made of T316 stainless steel, which is excellent in rust resistance and weather protection. Suitable for both indoor and outdoor, even coastal applications.
  • Pre-designed system- This product belongs to the SpaceSaver cable railing system, in which you can refer to how to build a cable railing project. It includes: Stainless steel side-mounted posts Muzata PF01.
  • Handrails (HT10-flat, HT20-round, HT30-thin).
  • cable cutter and hydraulic crimper CK12).
  • Adhesive washer CR74. For further information please scroll down to" product description" or....
Check Stock

Muzata 100pack T316 Stainless Steel Eye Shape Screws Heavy Duty Screw Eyes for Metal Hook Wood Terminal Ring Eyelet Hooks Self Tapping Screws M3 Eye Bolt CN18 HN2

  • Items included - M3 eye screws × 100. Please search ‘Muzata HN2’for other sizes of eye screws. The stainless steel point is easy to be screwed into wood, concrete and PVC without stripping. Widely used in home and industrial applications..
  • WoodLoft system - This product belongs to the WoodLoft cable railing system, in which we have planned everything you need for a cable railing project. It includes: Cable railing kits (CK01 or CN09).
  • Plz scroll down to" product description" or download the user guide PDF for complete system information..
  • Free design service - If you are a beginner or not sure about how to do it. Please reach us by clicking "by Muzata" below the golden button. Our experts can do all the planning, designing, and budget works for you without extra charging. Then you can follow the shopping list to buy all the materials in 3 minutes..
Check Stock

Saiksa Black Cable Railing Hardware, Steel Cable Railing Kit for 1/8" Stainless Steel Cable Railing System, for Metal & Wood Post, Turnbuckle Tensioner and Fixed Terminal 10 Pairs

  • Hidden - With this cable railing hardware, it can be hidden in wooden or metal post railings to give a nice looking cable railing..
  • Cool Black - This cable railing kit is plated with a high quality black coating, which is wear-resistant and durable, will not fade, cool black beautiful..
  • Rust Resistant - These cable railing hardware are made of T316 stainless steel, which is rust resistant and durable for indoor and outdoor use..
  • For 1/8" Cable - This cable railing kit for 1/8" cable railing system, for metal and wood posts..
  • Items Include - 10pcs Turnbuckle Tensioners, 10pcs Fixed Terminals, 1 hex wrench..
Check Stock

Steel DN Mate 100 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8" Steel Cable Railing Kit, Cable Railing Hardware, DIY Wood Baluster, Wrench Include, DM50

  • New design of deck cable railing kit, clean and elegant. This deck railing kit made of stainless steel T316 material, anti-rust, water, and corrosion, marine Grade, good for indoor or outdoor usage. It is suitable to DIY your stair railings, porch railing, terrace railings, and deck railings, With our new made wrench, installation becomes much easier..
  • This deck railing hardware fits 1/8" OD cable of the cable deck railing system. The thread lag screws are designed for timber/wood posts. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. This design can make wire deck railing hardware fits last longer..
  • Length of cable should be 1-1/2" shorter than wood surface distance(as shown in pic.4).
  • if you want to build a high-quality cable railing system, standard 1/8" (OD) cable which was made of T316-stainless steel is recommended..
  • The lag screws could be drilled into wood to adjust the tightness without an extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. A simple cost-effective cable ra....
Check Stock

Muzata 40Pack Cable Railing Kit Protector Sleeve Adhesive Grommet Protective for 1/8\ 5/32\ 3/16\ Wire Rope Wood Metal Posts T316 Stainless Steel Cable Deck Stair Railing CR91,CP2

  • Clean Finished Look - The protector sleeves could be used on INTERMEDIATE posts to cover ugly holes and present a clean look of your deck railing. They can also work with cable railing kit on END posts to for a neater look. Please note that adhesive sleeves are ONLY for decorative function, not for load-bearing applications. Package includes: 40pcs washers and 80pcs adhesives (Extra adhesives as backup and do not throw them away).
  • SPEC&Application - ID-3/16"(5mm),OD-3/4"(19mm),thickness-1/32"(1mm). These adhesive washers work for both wood and metal posts, fit 1/8" 5/32" 3/16" cable on level, fit 1/8" 5/32" cable at 30°angle. Please check the image to find the compatibility table for further models. Cable railing kit CR73 is recommended to work with CR91 for wood invisible cable railing system.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System - We pre-designed a CableGenie wood cable railing system to help you get a fully customized project, which includes cable railing kit CR73,1/8” wire rope WR02, adhesive sleeve CR91, drill guide CT19, crimper and cutter CT01, socket wrench ....
Check Stock

Muzata 50pack 1.5inch T316 Stainless Steel Eye Shape Screws, Heavy Duty Screw Eyes for Metal Hook, Wood Terminal Ring Eyelet Hooks, Self Tapping Screws, M4 Eye Bolt, CN20 HN2

  • Items included - M4 eye screws × 50. Please search ‘Muzata HN2’for other sizes of eye screws. The stainless steel point is easy to be screwed into wood, concrete and PVC without stripping. Widely used in home and industrial applications..
  • WoodLoft system - This product belongs to the WoodLoft cable railing system, in which we have planned everything you need for a cable railing project. It includes: Cable railing kits (CK01 or CN09).
  • Plz scroll down to" product description" or download the user guide PDF for complete system information..
  • Free design service - If you are a beginner or not sure about how to do it. Please reach us by clicking "by Muzata" below the golden button. Our experts can do all the planning, designing, and budget works for you without extra charging. Then you can follow the shopping list to buy all the materials in 3 minutes..
Check Stock

Muzata 45Ton Upgraded Custom Hydraulic Hand Crimper Tool for 1/8 Stainless Steel Cable Railing Kit Hardware Wire Rope Swaging Kit with 1Pair 1/8 Dies CR09 CT1

  • Custom Designed for Stainless Steel -- This hydraulic crimper tool is forged and custom-designed to provide 45 tons of crimping force, making it....
  • Simple to Use --The crimper is designed with a pressure release system to let you know when the swaging process is complete. The comfortable ergonomic....
  • Wide Applications -- This Muzata crimper CR09 fits 1/8" cable railing kits. It also matches regular crimping dies to crimp aluminum ferrules or copper....
  • Pre-designed systems -- This product belongs to some pre-designed cable railing systems released recently. We have planned everything you need for....
  • Upgraded -- We have upgraded this crimper consistently to resolve the problems like broken head or leaking oil after multiple times of crimping. If....
Check Stock

Steel DN Mate 60 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8' Deck Railing Kit, Cable Railing/Stair Deck Railing, DIY Hardware Kit, Wrench Included DM60

  • New deck railing design, clean and elegant. This cable railing kit includes 30 pcs left, 30pcs right hand thread lag screws, 1 patent design wrench, and 2 drill bits. Stainless Steel T316 material, anti-rust ,water and corrosion, marine Grade, good for indoor or outdoor usage. With our new made wrench, installation becomes much easier..
  • This deck railing hardware fit 1/8″ OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable..
  • Length of cable should be 1-1/2″ shorter than wood surface distance(as shown in pic.4).
  • if you want to DIY a high quality cable railing system, standard 1/8″ (OD) cable which was made of T316-stainless steel is recommended. Please search on amazon” B0B71J2DXD” if you need black lag screws..
  • By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing won’t be easily unfixed or destroyeded..
  • The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle ....
Check Stock