WELLMAKING U-Shape Camera Flash 180°Swivel Mount Bracket with Standard 1/4 to 3/8 inch Metal Male Screw Spigot Stud Compatible for Umbrella Softbox Reflector Holder Stand for Video Light Studio Light
【CAMERA FLASH SPEEDLITE MOUNT】It can be applied to various flash,Compatible with Nikon, Pentax, Olympus, Yongnuo and many more speedlites.(Note:this adapter does not fit Sony and Minolta flash).
【FLEXIBLE POSITIONING】These flash mounts allow 180° vertical and 360° horizontal adjustment to position the umbrella and flash light in different angle.
【1/4" SOCKET AND 3/8" METAL HOTSHOE】1/4" socket and 3/8" metal hotshoe foot on the bottom can be attached on tripod or light stand or any camera accessories with 1/4"-20 or 3/8"-16 thread.
【CAMERA UMBRELLA HOLDER】There is a hole in this item so that you can insert a lighting umbrella and align it with the flash.
【STURDAY AND STABLE】 The camera umbrella bracket is made of aluminum alloy,durable and solid..
Pixel TF-322 Flash Hot Shoe Sync Adapter with Extra PC Sync Port Dedicated for Nikon DSLR & Flashgun
Pixel TF-322 Hot Shoe Converter for Nikon, Easy to install - just slide into your camera's hot shoe. This adapter can be used to connect third party flash via standard hot shoe or PC sync cord socket..
Work with most flash guns in auto mode or manual mode ，Only supports the i-TTL mode of Nikon's original flash..
The Pixel Hot Shoe Adapter would be a great addition to your studio.Easy to use and would be perfect for any of your photography need..
This hot shoe adapter is perfect to mount a flash that does not have a sync connector for connection to a PC sync cord. It will allow those cameras to trigger external flashes by using the sync cord..
Pixel TF322 hot shoe adapter fits all Standard ISO 518-2006 hot shoe flashgun including the SB-900, SB-800, SB-600, SB-80DX, SB-50DX, SB-30, SB-29/29s, SB-28/28DX, SB-27 etc. Not suitable for devices with sync voltage of more than 6 volts.
Updated Anwenk Flash Cold Shoe Mount Adapter Flash Shoe Mount Flash Stand Adapter with 1/4\-20 Tripod Screw Thread for Camera Flash Nikon Canon Olympus Panasonic Speedlite Flash, 2Pack
Updated Cold Shoe Flash Stand Adapter. Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
Updated: NO SPRING. Never have to worry about the springs falling out again. That makes your expensive flash be held tightly and safely not by the springs lock, but your hot shoe locking wheel.(Your accessories should have hot shoe locking wheel in order to lock down to this cold shoe mount)..
Universal 1/4" Tripod Screw -Metal cold shoe to mount your flash onto bracket or tripod/light stand..
Smart Design - With a stop screw on the shoe mount adapter to prevent shoe mount accessories from accidentally sliding forward and keep your accessories silde Perfectly in right place..
Material: Metal construction with black anodized for higher durability..
NEEWER NW600 Flash Speedlite Compatible with Canon Nikon Panasonic Olympus Pentax Fujifilm Sony DSLR and Mirrorless Cameras with Standard Hot Shoe, GN40 On Camera Flash with Manual, S1/S2 Slave Mode
【Powerful Camera Flash】 Equipped with premium flash tubes, the NW600 camera flash provides a high guide number GN40 (35mm, ISO100), 76W power, reliable flash output, and consistent 5600K±200K daylight color temperature. Easy-to-read flash output level indicator.
【Multiple Modes Supported】 Supports M (manual), S1, and S2 flash modes. The flash output can be manually set at 8 levels (1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128) depending on the lighting conditions. 0.1–5s recycle time, 1/300–1/20000s flash duration. It also features a PC sync port to trigger the flash and your camera simultaneously by connecting with a PC cable.
【Adjustable Bounce Angles】 The flash head can turn right (180°) and left (180°) and tilt up (120°) and down (7°) for creating a bounce flash. The retractable diffuser and reflector help create more effects.
【Dual Power Options】 When powered using 4 x AA batteries, the flash is able to deliver 100–1500 flashes. Alternatively, choose the CP-E4 port for connecting an external power source. The flash is also equipped with a USB Type-C firmware update port in addition to incorporating an energy-saving and overheating-protection mechanism..
【Wide Compatibility】The single-contact hot shoe is compatib....
Obeamiu Camera Desk Mount Stand with 24.41'' Detachable Magic Arm, Mount Light Stand with 360° Ballhead, 16.7-40.1'' Tabletop Clamp Stand for DSLR Camera/Fill Lights/Selfies/Live Streaming/Webcam
Desktop C-clamp Stand Top with 1/4'' thread, come with ball head and a 1/4 hot shoe interface adapter (Removable). And asy to install microphone, Led video light, monitor to DSLR, camcorder or digital camera, Flash Remote Trigger or adapt anything via the 1/4" screw on the top of the mount..
【Adjustablement with Locking Knob】Adjustable Desktop C-clamp Stand: The size height could be extended from 16.7-40.1 Inch as you like. The ball head can ensure 360 degree horizontal rotating and from -90 degree to 90 degree tilting for panoramic photography when adjusting the angle. You can use the knob to adjust to the desired angle to meet your needs at different angles..
Made of highly-durable aluminum-alloy material with stainless steel, using a more stable structure. the hot shoe and c clamp clip with rubber-padded mount on the top to protect your equipment or table from potential scratches between your camera and the mounting part..
【Flexible Position】With its solid-metal clamps, adjustable and sturdy stand. Mounts to the back of your desk (range from 0.5 to 3.6''' thickness) via a heavy-duty C-clamp or optional grommet mount. Our desk mount stand can be adjusted to any thickness within seconds as needed..
Neewer NW625 GN54 Speedlite Flash for Canon Nikon Panasonic Olympus Pentax Fijifilm DSLRs and Mirrorless Cameras and Sony with Mi Hot Shoe Like a9 a7 a7II a7III a7R III a7RII a7SII a6000 a6300 a6500
Great Compatibility: Compatible with Canon Nikon Panasonic Olympus Pentax Fujifilm DSLR Cameras and Mirrorless Cameras and Sony Camera with Mi Hot Shoe like a9 a7 a7II a7III a7R III a7RII a7SII a6000 a6300 a6500. (NOT compatible with Canon EOS Rebel SL3/250D, Rebel T7/1500D 2000D, Rebel T100/3000D 4000D）.
Manual/S1/S2/Multi Flash Modes: Supports Manual, S1/S2 Flash, MULTI flash mode.
Note: Don't support TTL and the camera menu setting Function.
Vertical and Horizontal Rotation: Flash duration: 1/200s-1/20000s.
Support Manual Zoom 24-200mm, Flash can rotate -90 to180 degrees horizontally and -7 to 90 degrees vertically. It can provide you with a rich flash perspective. Weight about 340g, easy to carry.
Flash Output and LCD Display: 8 levels to control the light exposure manually 1/128, 1/64, 1/32, 1/16, 1/8, 1/4, 1/2, 1/1, step length is ±0.3EV.
22 levels fine-tune gears in total. A clear LCD can help you choose the flash you need more accurately and give you precise flash control. You need to use Ni-MH or 4 pcs AA ....
SENHAI Triple 3 Axis Hot Shoe Bubble Spirit Level Compatible Compatible for Canon Nikon Pentax DSLR Camera (2 Pack)
Easily identify if your camera is set up level on a tripod. A must have product for macro shooting..
Compatible with most DSLR Cameras with a Standard Hot Shoe Mount..
Note: Not for Sony / Minolta Alpha cameras because of different hot shoe design..
Made of crystal clear acrylic, being light, in a small size, high quality and novelty design..
The spirit level mounts effortlessly right into camera's hot shoe, and it can be easily placed on a flat portion of the camera, which corresponds to the lens axis..
Movo HVA20 DSLR Camera Dual Cold Shoe Mount Bracket for Lights, Monitors, Microphones and other Camera Accessories
TRANSFORM YOUR CAMERA: Transform your, DSLR, mirrorless camera, or camcorder into an all-in-one rig with its two shoe mounts.
WIDE COMPATIBILITY: Connects to any DSLR camera via a Shoe Mount or 1/4"-20 Mount.
1-YEAR WARRANTY: We’ve got your back! Our products are designed to ease your technical woes, not add to them. Our friendly US-Based support is here to help.
VERSATILE: Allows the use of multiple shoe mount accessories at the same time, so you can revolutionize the way you take photos and videos.
STURDY: Its durable and rigid aluminum alloy construction provides a wobble-free mount and built-in backstops ensures the safety of your light, microphone, and other camera accessories.
