Orion Motor Tech Turbo Engine Timing Tool Kit, Camshaft Alignment and Locking Tool Set, Timing Belt Kit Compatible with 1.0L 1.2L 1.4L Chevy Cruze Vauxhall Opel More, 7pc Timing Chain Replacement Set
...r running the way it used to? It's time for a tune-up and time to roll up your sleeves and use this Orion Motor Tech tool kit to hold your vehicle's timing system at top dead center while you check, fix, and replace worn and damaged components.
COMPLETE SET: This OEM-equivalent engine timing belt tool set includes a camshaft locking plate, sensor locking tools, an inlet camshaft adjustment tool, and the pins necessary to keep your engine's timing system in place.
PREMIUM MATERIAL: These camshaft alignment tools are all made with heat-treated structural steel for maximum durability and strength so you can reliably get your engine running like new.
a rugged blow molded case comes included for easy organization, storage, and transport.
WIDE COMPATIBILITY: This engine timing tool set is compatible with late model 1.2L and 1.4L Chevrolet Aveos (since 2011), Cruzes (2011-), and Orlandos (2012-) as well as a wide range of recent 1.0L, 1.2L, and 1.4L Vauxhalls and Opels including the Adam (2012-), Ampera (2011-), Corsa D (2009-), Cascada (2013-), Insignia (2011-), Meriva B (2010-), Mokka (2012-), and Zafira C Tourer (2011-).
QUALITY ASSURANCE: Order this rigorously tested alignment tool set today, knowing that Orion Motor Tech's strong 1-year warranty and usual ....
Includes important tools for checking and adjusting the Engine Timing after a Timing Belt Replacement: Crankshaft Locking Tool, Camshaft Locking Tool, Camshaft Wheel Puller, Balance Shaft Fixing Tool..
Made of premium chrome vanadium steel for high strength and durability.
Skoda: Fabia, Roomster, Practice, Octavia II, Suberb II, Yeti. Golf V, VI & Plus, Passat, Polo V, Jetta V, & VI, Scirocco III, Beetle II, II Caddy, Passat B6, B7 & CC,Touran, Sharan II, T5, Amarok..
Applicable for VW ,AUDI ,SEAT 1.6 2.0 TDi engine from 2007..
Yuesstloo Engine Camshaft Timing Locking Tool Kit, Compatible with Jaguar Land Rover Evoque 2.0T Ford Focus 2.0 Ecoboost Ti-VCT Mondeo Focus, Replace 303-1504 303-1595, with Carrying Case & Gloves
Yuesstloo Engine Camshaft Timing Locking Tool Kit is used to check and lock the camshaft of petrol injection engines. Help you align camshafts, set crank sensor and balancer, adjust crankshaft in the correct TDC position. Simplify engine work and complete work correctly and efficiently..
The timing tool compatible with Jaguar Land Rover Evoque Ford Mondeo 2.0T Engine. Works for 2.0L Duratec-HE (MI4) Petrol, 2.0L EcoBoost GTDI (MI4) Petrol, 2.0L ST EcoBoost GTDI - (MI4) Petrol, Focus (2011.2), Galaxy (2006.5), Mondeo (2007.5)..
Replace OEM Equivalent Part Number: 303-1600.
303-1504. Works on the engine code: TNWA, TNWB, TPWA, TNBA, MGDA, XQDA..
The camshaft timing tool is made of high-quality steel, coated with black antioxidant layer, strong hardness, durable to use. Comes with a portable heavy-duty case, all parts are neatly placed, and have a pair of gloves can be worn when using tools. Convenient to operate and store, easy to transport and organize..
100% CUSTOMER SATISFACTION GUARANTEE: If you are unhappy for any reason or there is some problem with our products, you can get help from us. Customer satisfaction is our top priority..
OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW
POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
Pulls pulleys on GM belt-driven vacuum pumps.
HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
Power steering pump pulley installer designed to tackle any small pulley job.
CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
Pulls pulleys on GM belt driven vacuum pumps.
Pulls pressed-on water pump pulleys of GM V6 engines.
OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green
POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
Pulls pulleys on GM belt-driven vacuum pumps.
HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
Power steering pump pulley installer designed to tackle any small pulley job.
CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
Pulls pulleys on GM belt driven vacuum pumps.
Pulls pressed-on water pump pulleys of GM V6 engines.
INTENDED USE: Holding the camshafts at Top Dead Center to ensure proper timing when servicing cams, gears, chains, etc. and positioning over the ends....
HIGH STANDARD QUALITY: Made of superior structural steel and coated with black oxide finish, it is an excellent solid plate, which is effective for....
100% SATISFACTION GUARANTEE: Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this Camshaft Holding Tool,....
HIGH STANDARD QUALITY: Made of superior structural steel and coated with black oxide finish, it is an excellent solid plate, which is effective for....
INTENDED USE: Holding the camshafts at Top Dead Center to ensure proper timing when servicing cams, gears, chains, etc. and positioning over the ends....
100% SATISFACTION GUARANTEE: Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this Camshaft Holding Tool,....
Goplus 16pcs Universal Serpentine Belt Tool Set, Comprehensive Set of Tools to Assist with the Removal and Installation of Serpentine Belts, Adjuster Tightener Wrench Tool Kit
GENUINE/COMPLETE timing belt& water pump kit Replacement for HONDA/ACURA V6 factory parts.
This part is available for those of who know exactly what you are looking for and just need a place to buy it. If NOT,please DO NOT TRY.Includes All Parts You Need for Timing Kit.
Includes The Following New Parts:Timing Belt(14400-RCA-A01),Idler Roller / Pulley(14550-RCA-A01), Tensioner Roller / Pulley(14510-RCA-A01),Water Pump & Gasket(19200-RDV-J01)Hydraulic Tensioner14520-RCA-A01Front Camshaft Seals x 291213-R70-A02 /91213-RKG-003Front Crankshaft Seal91212-R70-A02 /91212-5MR-A01Serpentine Drive BeltMITSUBSHI /38920-RCA-A03 /56992-R70-A01 / 56992-RV0-A05/38920-RCA-A01.
Includes 9 pieces,all parts brand new in package,and has a corresponding original code,picture shows actual parts for reference.
Fit and easy installation, quality materials used, 100% tested before shipping.
