Best Cane Presser

Piping Sewing Machine Presser Foot - Fits All Low Shank Snap-On Singer, Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Simplicity, Elna and More

  • Piping Presser Foot With 2 Grooved Holes,Make sure that the biggest thread/rope diameter under the grooved hole is within 5mm..
  • Settings: Stitch width is suggested to be 0 with length at 1-3. Be sure to use the straight stitch in the CENTER position, otherwise, you will break your needle..
  • Pros: Makes a difficult job into a breeze! This particular presser foot will do either single or double piping which makes it a better buy than just the single piping presser feet..
  • Provides Ease-of-Use for Tasks that Could be Extremely Tedious if Done by Hand.
  • Fits All Low Shank Snap-On Singer* (Some Singers Require Low Shank Adapter), Babylock, Euro-Pro, Kenmore, White, Juki, New Home, Simplicity, Necchi and Elna Sewing Machines.
Check Stock

Narrow Rolled Hem Sewing Machine Presser Foot Set Suitable for Household Multi-Function Sewing Machines 3 mm, 4 mm and 6 mm (3)

  • 3 Different sizes: this narrow hem sewing presser foot kit includes 3 sizes, will help you create beautiful rolled hems on lightweight fabric effortfully.
  • Durable material: the hem presser is made of stainless steel, which is long-lasting and durable, bright color and not easy to rust.
  • Narrow rolled hem foots: the sewing hemming feet can be applied to most of household low shank sewing machines.
  • Suitable for some thin fabric serging stitch, beautiful and practical.
  • Quantity: this set includes 3 pieces rolled hem presser foot in 3 sizes, 1 piece in 3 mm, 1 piece in 4 mm and 1 piece in 6 mm, sewing with this foot is not difficult but it may need a bit of practice.
  • It is suitable for some thin fabrics, which can be better to roll up some beautiful patterns.
  • Tips: this foot set for promises a friendly condition of use, it can fit for most low shank sewing machine, such as, compatible with Brother Singer and Janome, etc..
Check Stock

7Penn Aluminum Tortilla Press 6in - Corn Tortilla Press Roti Maker Flour Tortillas Presser Chapati, Roti, Naan, Tacos

  • [Create Your Craft]: Whether you are looking to make tortillas, naan bread, chapati, roti, and other flat foods, look to the 7Penn 6-Inch Corn Tortilla Press Tortilla Maker.
  • Corn tortilla press is non-electrical and manually operated.
  • [Built to Last]: Tortilla press maker is constructed of durable aluminum to withstand extended, repeated use.
  • Round, smooth surface of tortilla press roti maker will allow you to make perfect tortillas every time.
  • [Easy to Use]: Flatten tortillas into uniform thin circles with this tortilla press maker taco press.
  • Place ball of dough onto center and press down on lever.
  • [For Your Dishes]: With this flatbread maker roti press, you can consistently craft any flour tortillas, naan bread, chapati, roti, lefse, and more.
  • Place sheets of plastic or kitchen paper (not included) on chapati maker before pressing bread.
  • [Perfect Fit]: This flour tortilla machine manual roti presser will create 6-inch (15cm) tortillas, chapatis, and more.
  • Chapati presser measures 8.37 x 6.25 x 2 inches (21 x 15 x 5cm) and weighs 1.6 pounds (0.7kg).
  • Presser includes hole for hanging in your kitchen.
Check Stock

6 Pcs Sewing Machine Presser Foot Set Narrow Rolled Hemming Foot Kit for All Low Shank Snap-On Singer Brother Janome Sewing Machine

  • 1.Package Contents:6PCS different size press foot,3pcs wide rolled hem presser foot(4/8inch,6/8inch and 8/8 inch)and 3pcs narrow sewing foot hemmer(3mm,4mm and 6mm), 1PCS scissors, meet your basic needs,super value hemming foot kit!.
  • 2.High Quality Sewing Machine Feet Set:Casting with heat treated carbon steel, which is long-lasting and durable, not easy to rust Bring you a perfect using experience..
  • 3.Convenient To Use:The sewing machine use rolled hem presser foot has a excellent design and easy to operate. Narrow rolled hem foots can be applied to most of household low shank sewing machines..
  • 4.Widely Use:be suitable for brother singer,Janome,low shank,babylock,euro-pro,kenmore,white,elna,sewing machines,etc.It is a good helper for you to sew..
  • 5.Tips:It not difficult to sewing with this narrow rolled hem presser feet,but if you want to do it well,you may need a bit of practice..
Check Stock

Vanell Mini Manual Heat Press Machine 350kg Max Down Force Hot Presser 3 X 2 Inch Heat Platen LCD controller 300W Shirt Heat Press Transfer Sublimation Press Machine

  • Herb Drying & Oil Extraction Heat presser heat platen: 1.2-inch thick solid aluminum made heating element, 3x2inch Platen, 0~250/485 Temperature Range, 2~5 Temperature Difference.
  • The clamshell heat presser is able to generate 350kg/ 770lb force and work perfectly, Digital Control Panel, Aluminum Heating Element.
  • CE (EMC, MD, Rohs)/ UL certified spare parts: spare parts used on prior heat presses are either CE or UL certified, which remains stable working condition and lower fail rate.
  • Attention: Before Using, you need to increase the pressure by using the pressure adjustment wrench to adjust the pressure nut. Please kindly noted that do not adjust the pressure very large, this may cause the machine problem like handle broken, and will influence the heat press machine service life.
Check Stock

Sewtco Regular Point Sewing Machine Needles - Organ 15x1 Titanium 04808 - Set of 30 Assorted Sizes - 75/11, 80/12, 90/14

  • Made in Taiwan High Quality Sewing Presser Feet From DreamStitch. Part No.5011-2.This snap-on adapter allows you to use snap-on feet with your high shank machine.With this shank, you can attach all your snap-on presser feet to be used on industrial/ high shank machines. Please note, some of straight stitch presser feet are not included..
  • Fit Babylock : BL2000, BL2200, BL2300, BL500, BL510A Jane, Jane BL500A, Quilter’s Choice Pro BLQP.
  • Fit Janome : 1600P, 1600P-DB, 1600P-QC, 444, Memory Craft 6600P, 1600P-DBX ..
  • Fit Brother : BM2800, BM2800CT, BM2800FG, BM3700, BM3700CT, BM3700FG, BM3850, BM3850CT, BM3850FG, GS2700, GS2786K Hello Kitty, GS3700, GS3710, GS3740C, Hanami27S, Hanami37S, LS-2320, LX2763, PQ1300, PQ1500, Nouvelle PQ1500S, RS40S, RS45S, Star27S, Star37S, XQ2700, XQ3700, XR-46.
  • Fit Juki : DDL-8700, TL-98E, TL-98Q, TL-98QE, TL-98P.
Check Stock

DREAMSTITCH 5011-2 Presser Foot Shank High Shank for Babylock,Brother,Janome,Juki,Necchi,Pfaff,Simplicity,Singer,Viking Sewing Machine

  • Made in Taiwan High Quality Sewing Presser Feet From DreamStitch. Part No.5011-2.This snap-on adapter allows you to use snap-on feet with your high shank machine.With this shank, you can attach all your snap-on presser feet to be used on industrial/ high shank machines. Please note, some of straight stitch presser feet are not included..
  • Fit Babylock : BL2000, BL2200, BL2300, BL500, BL510A Jane, Jane BL500A, Quilter’s Choice Pro BLQP.
  • Fit Janome : 1600P, 1600P-DB, 1600P-QC, 444, Memory Craft 6600P, 1600P-DBX ..
  • Fit Brother : BM2800, BM2800CT, BM2800FG, BM3700, BM3700CT, BM3700FG, BM3850, BM3850CT, BM3850FG, GS2700, GS2786K Hello Kitty, GS3700, GS3710, GS3740C, Hanami27S, Hanami37S, LS-2320, LX2763, PQ1300, PQ1500, Nouvelle PQ1500S, RS40S, RS45S, Star27S, Star37S, XQ2700, XQ3700, XR-46.
  • Fit Juki : DDL-8700, TL-98E, TL-98Q, TL-98QE, TL-98P.
Check Stock

VEVOR Fruit Wine Press 1.45Gal/5.5L Grape Press for Wine Making Wine Press Machine with 2 Stainless Steel Barrels Wine Cheese Fruit Vegetable Tincture Press with T-Handle and 0.1 /3mm Thick Plate

  • Food-Grade SUS Material: For providing you with the original flavor of the juice or wine, food-grade stainless steel is adopted on this manual wine presser, featuring security and rust & wear resistance. If you want to obtain a higher juice yield and reduce waste, it would be better to cut the fruits and vegetables into small pieces before pressing..
  • Convenient Dual Barrels: With the two stainless steel barrels, inner 1.06 Gal/4 L and outer 1.45 Gal/5.5 L, which are placed right below the pressure plate when juicing, you can receive an ideal effect for separating the dregs and juice. The juice will flow through the meshes on the inner barrel and the outlet on the outer, finally collected in your container. Besides, a nylon filter bag is also offered to avoid splashing..
  • Effortlessly Press & Juice: The T-shaped handle, along with the energy-saving balls on both sides, can promote effortless operation. Just rotate the handle, then you can enjoy a cup of hand-made juice or wine in your spare time and feel the slow pace of life..
  • Easily Take Apart & Clean: Unlike the electric juicers, this manual presser for wine and juice making calls attention to easy washing. All the parts of this fruit press are detachable, from the comfort of which you can ....
Check Stock

Bernette 38 Swiss Design Computerized Sewing Machine

  • Features: Stitch Width - 5mm Hook system - Front loading Buttonhole - Four-step Utility Stitches - 14 Patterns - 15 Sewing speed - 860 stitches/minute Contents: Bobbins (3x) Seam ripper (buttonhole opener) Needle set Zigzag foot Buttonhole foot with slide Blindstitch foot Zipper foot Button-sew-on foot Foot control.
  • The bernette 33 mechanical sewing machine with stylish Swiss design is a perfect beginner machine..
  • 5 different presser feet are included Includes large accessory box Manual thread-cutter Semi-automatic needle threader Simple operating knobs Stable presser foot shank and bobbin rods Swiss design for impeccable quality.
Check Stock

YRDQNCraft 1/4” Straight Stitch Snap-On Foot Presser Foot for Brother Singer Juki Janome Babylock

  • Straight Stitch Sewing Machine Presser Foot.
  • Exactly 1/4" from center needle to edge of presser foot.
  • Perfect stitch formation on fine fabrics.
  • For use with low-shank sewing machines, including brands Babylock, Bernina, Brother, Elna, Euro-Pro, Husqvarna Viking, Janome, Juki, Kenmore, Necchi, New Home, Pfaff, Simplicity, White.
Check Stock