Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..
Application: compatible with RC helicopter, airplane, multirotor, Boat, Car, Truck, models 1/10 scale vehicles or larger (Only if the voltage, dimension and the plug match, then it will fit).
MECCANIXITY Retractable Spring Balancer Tool Holder Hanging Equipment 3.3-6.6lbs (1.5-3kg) for Assembly-line with Fitting Accessory
Spring balancer is an auxiliary tool for hanging production operation equipment..
Retractable spring balancer is in specification of Capacity: 3.3-6.6lbs (1.5-3kg).
Size: 145mm x 100mm x 38mm / 5.71 x 3.94 x 1.5 inch.
Solid metal construction provides continuous and repetitive work on your assembly line for hanging, carrying, and removing tools..
It can manually lock the position of suspended objects to avoid falling of suspended objects, easy to operate pneumatic, electric and hydraulic tools..
Please confirm the weight of your suspended items and choose the right load..
19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder for Honda and Acura Engines
【50MM Crankshaft Pulley Removal Tool 】-- Used to maintain the harmonic damper pulley position while removing/installing the pulley bolt on many....
Using 50MM Crankshaft Pulley Removal Tool -- Use with square socket driver. >1/2" square drive use with breaker bar. Hole in center of tool - allows....
【19 MM Harmonic Balancer Socket 】--The hex socket is used with an impact wrench to loosen the crankshaft bolt It can be used on Honda engines that....
Using 19MM Harmonic Balancer Socket -- Use with 1/2" drive.Designed with more than three times the standard socket mass to direct more energy to....
Satisfaction Guarantee: If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days, guarantee with 12 months’....
Bolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine
Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
XK USA 1.5 HP Automaticw Tire Machine Tire Changer Wheel Balancers Machine Rim Balan CER Combo 960 680 Rim Clamping 12'-24' w/Auxiliary Arm and Air Bead Blaster Function / 12 Month Warranty
Tire Changer - Rim clamping outside 10"-20" / Rim clamping inside 12"-24".
Wheel Balancer - Rim diameter: 10" - 24" / Rim width: 1.5" - 20".
Tire Changer - Maximum Tire Diameter 37" (960mm) / Maximum wheel Width 12".
