Best Carbide Coated Hole Saws

Makita T-01410 6-1/2\ 40T Carbide-Tipped Circular Saw Blade, Fine Crosscutting

  • Ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss.
  • Carbide tooth construction for clean cuts and long life.
  • Fully hardened and expertly hand-tensioned steel saw plates for true cuts.
  • Specially designed for cordless saws to permit more cuts per charge.
  • For use with 6-1/2" Cordless Circular Saws with 5/8" arbor.
Check Stock

Hole Saw Set 7Pcs Diamond Drill Bits with Hole Saw Guide Jig Fixture 1-3.15 inch Coated Core Drill Bits Adjustable Hole Saw Centering Locator Suction Holder for Glass,Ceramics,Tile

  • 7 Sizes Diamond hole saw : 26mm,30mm,40mm, 50mm,60mm,70mm,80mm,made of high strength carbon steel makes these diamond drill bits durable..
  • The diamond hole saws coated with high quality diamond,enhance the drilling speed and creates a sharp, high precision and smooth cut with no broken....
  • Adjustable hole saw drill guide jig fixture with suction base.Plates' maximum opening length is 3-1/4", large enough to put in all sizes' hole saws..
  • Removable ball bearings, 2 Modes (3 or 4 bearings fixing ) are optional for you, just flip the plate.Guide hole saw or drill bit to drill clear holes....
  • Drilling holes for Glass, Tile Bottles, Blocks Jars, Fiber Glass Porcelain Tile Ceramic, Slate Mable, Granite Light Stone.
Check Stock

Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal & Plastic Cutting Saw Blade 5/8-Inch Arbor (4 Pack)

  • Special Tico Carbide formula offers a blend of carbide with low Cobalt content that produces a very "hard" carbide for long cutting life..
  • This blade features a thin kerf triple chip design that is specially designed to cut laminate flooring (Pergo, Armstrong, Swiftlock), double-sided laminates and melamine cleanly.
  • Features Freud's Perma-Shield coating, Anti-Vibration reeds, Heat Expansion slots, and Laser Cut technologies..
  • Thin kerf design to increase machine performance. Ideal for sliding mitre saws and underpowered table saws..
Check Stock

SKIL 75740W 7-1/4-Inch 40-Tooth Carbide Tipped Circular Saw Blade for SKIL Circular Saw 5280-01/5180-01/5080-01

  • Carbide teeth can last up to 60 times longer than standard steel blades.
  • Compatible with 7-1/4" diameter circular saws 5280-01/5180-01/5080-01.
  • Included components: 7-1/4-Inch 40-Tooth Carbide Tipped Saw Blade.
  • Enjoy smooth cutting performance for framing and general-purpose cutting with the Skil 40-Tooth Carbide-Tipped Saw Blade. It comes with sharp cutting edges and induction hardened teeth for durability. This 7-1/4" circular saw blade fits most standard circular saws. It comes with a clear, anti-stick coating that helps reduce friction and binding during use. The Skil saw blade also comes with a 5/8" diamond knock-out arbor to make installation and removal easy..
Check Stock

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

  • Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • For semi-finishing and finishing operations.
Check Stock

OSCARBIDE 3/4'' x 10'' Indexable Boring Bar with 10 Pieces Carbide Inserts CCMT09T304(CCMT32.5),Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

OSCARBIDE 1/2 x 7 Indexable Boring Bar with 10 Pieces Carbide Insert CCMT09T304 CCMT32.5 Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 1/2" Shank Diameter,Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance.
  • Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 1/2'' x 7'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

Diablo by Freud DJT141HM 4 in. 6 TPI Carbide T-Shank Jig Saw Blade for Fiber Cement & Plaster

  • Aggressive carbide tooth geometry delivers fast and effortless cuts.
  • Enhanced carbide tip to blade connection for extreme impact resistance.
  • T-shank design fits all combo and most U-shank jig saws.
  • Maximum performance in cordless and corded jig saws.
Check Stock

OSCARBIDE 1/2 Round Shank 4 Pieces/Set Boring Bar Set,90 Degree with Indexable Carbide Inserts TCMT21.51 TCMT110204

  • OSCARBIDE Boring Bar Set ,1-1/4”to 2-1/2”Boring Depth ,7/16” to 1/2”Min Bore ,1-3/4” to 4” Overall length,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

Furniture Mod - Furnicraft

  • Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM.
  • Perfect for slicing through both hard and softwoods of all kinds.
  • Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts.
  • Designed with 80 carbide-tipped teeth for ultra-fine finish wood cutting.
  • Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws.
Check Stock