Material: made of solid carbide with Tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
Designed for Steel, cast iron and non-ferrous materials.
Used for turning and finishing on a wide range of materials.
10 pieces Carbide inserts for replace our 1/2” Lathe turning tool holder set , or other brand same size holder, you can search Asin:B086PTB3K3 and buy tool holders.
ASZLBYM 2PCS 5/8\ MGIVR2016-2 MGIVL2016-2 Lathe Boring Bar Grooving Cut-Off Tool Holder with 2PCS MGMN200-G NC3020 Insert
Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
Packing:1 pc 5/8'' x 8'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Material: made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
Designed for Steel, cast iron and non-ferrous materials,used for turning and finishing on a wide range of materials.
OSCARBIDE TCMT 21.51 has wear-resistant and heat-resistant, not easy to stick to the holders or workpieces or break up.Vacuum hardening, exquisite craftsmanship, easy cutting..
Fit our 1/2”Boring Bar Set Tool Holder or 3/8" Mini Turning Tool Holder or Other Brands the same size carbide inserts, you can search the Asin: B07PLX982C or B07PYSN4JC to purchase set directly..
HEMUNC 3pcs Oscillating Tool Blades for Grout Removal Tile Mortar Concrete Masonry 1/8 Fit for Dewalt Milwukee Rockwell Bosch Dremel Ryobi Ridgid Multitool
✔Super Value Grout Removal Blade For Oscillating Tool: contains 3pcs 3-5/8 Inch Half-moon carbide grout removal blade which is a great multitool....
✔ High Quality Blade For Oscillating Tool: HEMUNC oscillating carbide grout blades are made by Revolutionary Carbide Technology, robust and durable,....
✔ Widely Use Range: This Universal Fit carbide grout oscillating blades is a wide use blade that quickly removes material such as grout, plaster and....
✔ Compatible With Most Oscillating Mulitools: This carbide oscillating grout blades set are compatible with the majority of the oscillating tool....
✔ Customer Guaranteed: We provide high super Customer Service. If you are not satisfied with our oscillating carbide grout removal blades for any....
OSCARBIDE 3/4\Self-Lock Block SLTBN19-5 with Adjustable Blade NCIH26-3,Blade NCIH26-4,Tin Coated 5 pcs GTN-3 Carbide Inserts and 5 pcs GTN-4 Inserts Parting Grooving Cut-Off Tool Set
Indexable Cutting Tool Holder Set include 1 pc 3/4" SLTBN19-5 Tool Block. 1 pc NCIH26-3 adjustable blade with 5 pcs GTN-3 carbide inserts. 1 pc NCIH26-4 with 5 pcs GTN-4 Inserts and 1 pcs wrench..
CTN-3 carbide inserts made of carbide Grade C6,0.12" width, TiN Coated. GTN-4 carbide inserts, made of Carbide Grade C6, 0.16" width, TiN Coated.
Suitable for varied Grooving,Cut-off,Parting-off,Chamfering.
This cut-off tool kit works with tool holders that can hold 3/4" AXA lathe turning bits,Equipped carbide inserts for Semi-finishing/roughing machining of steel and stainless steel.
HEMUNC 3pcs Oscillating Tool Blades for Grout Removal Tile Mortar Concrete Masonry 1/16, Fit for Dewalt Milwukee Rockwell Bosch Dremel Ryobi Ridgid Multitool
✔Super Value Grout Removal Blade For Oscillating Tool: contains 3pcs 3-5/8 Inch Half-moon carbide grout removal blade which is a great multitool blade attachment for cutting on fillers, tile adhesive, concrete, mortar, ceramic grout and soft stone. The Semicircle carbide oscillating grout blade allows you to cut into concrete and defective tile joints with its sharp carbide grains..
✔ High Quality Blade For Oscillating Tool: HEMUNC oscillating carbide grout blades are made by Revolutionary Carbide Technology, robust and durable, which works great for back splashes, wall to floor joints in showers etc., the carbide grit lasts up to 2x longer than similar products in the market..
✔ Widely Use Range: This Universal Fit carbide grout oscillating blades is a wide use blade that quickly removes material such as grout, plaster and other adhesive products from floor or wall tiles during replacement or restoration projects, and the thickness of the carbide grit is 1/16", perfect for thicker grout removal, it may not work if you have narrow grout lines..
✔ Compatible With Most Oscillating Mulitools: This carbide oscillating grout blades set are compatible with the majority of the oscillating tool brands such as Dewalt Milwukee Rockwell Bosch Dremel Ryobi ....
Mini Turning Tool holders with 1/16'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
5pcs in a wooden case for safe storage, the carbide inserts replacement TCMT090204,please search the Asin B07SJX9YNR to buy it on amazon..
TSDNN 2020K 12 is a new T-type double style tool holder,it can be accurately, strongly clamp the carbide insert,which is the upgraded style of DSDNN 2020K 12 turning holder.
Turning holder is made of Nikel Coated HSS,carbide insert is made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
Our External Turning Holder which using the newly developed new double clamping structure, The clamping plate is designed with positioning, anti-turning function and high clamp Tight and rigid, high positioning accuracy, high stability, reliable Now the blade is fast, strong, accurate clamping, is straight The best choice for hole negative Angle blade clamping..
Used for external turning, roughing to finishing, but also for internal turning when chip evacuation is good..
Savannah 3 Piece Carbide Mini Turning Tool Set with Flush Fit Comfort Grip Hardwood Handles | Heavy Duty Steel Riveted Ferrules and 2 ea Round 2 ea Square and 2 ea Diamond Shaped Carbide Cutters
Easy wood turning on your lathe with Savannah Carbide Turning tools. We all know how "enjoyable" sharpening our turning tools can be. We also know....
When the carbide cutter on the tool finally dulls, simply loosen the cutter screw, rotate the tip and secure the screw for a fresh, clean cutting....
Unlike standard wood turning tools, when using carbide tipped cutters, you keep the cutter straight in on the object you are turning. This produces a....
Each mini turning tool has a Flush Fit Comfort Grip handle. Each handle is approx. 9-1/8" long and has a heavy duty steel ferrule for added strength....
The set includes 1 ea. round tool, 1 ea. square tool, 1 ea. diamond shaped tool, 2 ea. round carbide cutters, 2 ea. square carbide cutters, 2 ea.....
Material: made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
Designed for Steel, cast iron and non-ferrous materials.
Used for turning and finishing on a wide range of materials.
7 pieces Carbide inserts for replace our 5/8” or 3/4" Lathe turning tool holder set,or other brand same size holder, you can search Asin:B07RBPHTZR or B07S9DDL6X buy tool holders.
