Corona Tools 13-Inch RazorTOOTH Pruning Saw | Tree Saw Designed for Single-Hand Use | Curved Blade Hand Saw | Cuts Branches up to 7\ in Diameter | RS 7120
IDEAL FOR LARGE BRANCHES: 13 inch blade ideal for cutting 7 inch diameter branches.
INNOVATIVE ERGONOMIC HANDLE: Pistol grip and finger hook provides efficiencies for Professional Arborists.
3 SIDED RAZOR TEETH FOR EFFICIENT CUTTING: Triple ground teeth cut more material at greater angles per saw pass.
LONG SERVICE LIFE: Impulse-hardened teeth extend durability of the saw sharpness.
HIGH-CARBON STEEL BLADE: Made of Japanese SK5 steel with exceptional hardness and durability for a long-lasting tool.
CNBTR 5mm Bore Hole Diameter Brass Gear Shaft with 20 T Wheel 0.5 Modulus Set Drive Gear Box Shaft
Transmits torque between parallel shafts to provide rotational power to another part of a motorized system.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Diametral pitch of 16 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision.
High carbon steel for tensile strength and hardness.
EFFECTIVE: Our camping hatchet is designed for easy chopping of Firewood, Logs, Kindling and Branches. The Optimized and aggressive blade angles is....
DURABLE - This chopping axe features Forged, Grade-A Carbon Steel, Heat Treated blade with hardened cutting edges which provides a deeper and cleaner....
PROPRIETARY DESIGN: Stronger than the wooden shaft and won’t bend like steel, Our Hatchet is Designed with Innovative reinforced injected fiberglass....
EFFICIENCY - Our camping axe handle features an exclusive Balance point close to the axe head which provides perfect weight distribution, increased....
SAFETY - The blade comes with a handy Protective Carrying Sheath + Blade Edge Guard that keeps your hatchet safe, protected, and conveniently....
1 Mod 25T Steel Pinion Gear 1M25T Motor Spur Gear Bore 8mm Outer Diameter 27mm (Bore 8mm)
Transmits torque between parallel shafts to provide rotational power to another part of a motorized system.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Diametral pitch of 20 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision.
High carbon steel for tensile strength and hardness.
[Efficient& Uesful]: Our Wood Chopping Axe is Designed for Easy Chopping of Firewood, Logs, Small Tree& Branches. Aggressive Cutting Angles Design for Better and Efficient Contact. Ideal for Campers, Hikers, Preparing Wood for Bonfires, Gardening,and Many Outdoor Activities..
[Wood Axe]：The Hatchet is 15inch in Overall Length, Handle is 12.9inch, Cutting Edge-4 inch..
[Easy Storage]:The Blade Comes with a Rubber Protective Sheath for Safe Storage and Transport. Features Triangle Hole is Easy Hang and Convenient Storage.
[Resharpenable Blade]. The Head of the Steel Blade has a Protective Rubber and the Cutting Blade Features a Fully Polished Finished Edge. Polished Finished Edge Which Can Easily be Resharpened With a File..
Anrik 1\\/4 inch x 2-1\\/4 inch - 20 Pieces Wedge Anchor Zinc Plated Heavy Duty Fastener for Concrete
Wedge anchor diameter: 1/4" | Length: 2-1/4" | Qty: 20 pieces. Our wedge anchor is made from high quality carbon steel, and is zinc plated to prevent rust.
Drill bit diameter/Hole diameter is the same as anchor diameter. Use a 1/4" drill bit to drill a hole in the base material (Concrete only).
The wedge anchor is a torque-controlled, wedge expansion anchor. The required installation torque of the anchor is 4 ft/lbs..
The concrete anchor is for heavy duty fastening applications where high pull out values in concrete are needed. It is for concrete only, not for block or brick base material.
The wedge anchor is used in fastening sheet metal, steel and aluminum angles, or wood to concrete. The wedge anchor is ideal for structural anchorage, storage racking anchorage, machinery and hand rails installation.
aisyoko Damascus Chef Knife 8 Inch Sharp Kitchen Knife Japan VG-10 Stainless Steel Carbon Ultra Sharp Kitchen Cooking Knife, Ergonomic G10 Handle Deluxe Gift Box
...calpel-like sharpness at 11-15° angles on each side for easy slicing. Ideal cutting force, ultra-thin cutting edge technology, Long-lasting sharpness, no sharpening for a year..
【Super sharp cutting core material】 This product is made of professional super steel VG10 cutting core (made of 67-layer Damascus high-carbon stainless steel), which is hammered by vacuum heat treatment. During the folding and forging process, Damascus steel will form very dense fine metal grains, which will sharpen the fine sawtooth super sharp edges on the cutting edge..
【Perfectly balanced performance】 The 8-inch master knife can be used with both hands. It has a better cutting balance angle without causing physical fatigue, allowing us to cut faster and more efficiently. Features: The blade is slender, lightweight, and the sharp edges are suitable for various foods..
【Striking angles Life-Long Durability】The premium military grade G10 handle is virtually immune to heat, cold and moisture. The unique 3D design of the handle fits snugly in the palm of your hand for a firm grip no matter which grip you use. The hand-polished back feels smooth and comfortable, while the G10 handle is slightly textured for non-slip properties..
Martin TS2020 Spur Gear, 20° Pressure Angle, High Carbon Steel, Inch, 20 Pitch, 1/2\ Bore, 1.1\ OD, 0.500\ Face Width, 20 Teeth
Transmits torque between parallel shafts to provide rotational power to another part of a motorized system.
Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles.
Diametral pitch of 16 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision.
High carbon steel for tensile strength and hardness.
