Best Carbon Steel Casing Pipe

Zurn Z1333-C Chrome 3/4 Exposed Non-Freeze Wall Hydrant Z1333-C

  • Complete with integral backflow preventer, copper casing, all bronze interior parts,.
  • Non-turning operating rod with free-floating compression closure valve,.
  • Combination 3/4 female solder and 3/4 male pipe thread inlet connection standard..
  • Regularly furnished with 3/4 male hose connection..
  • Includes stainless steel face with operating key.
Check Stock

2.5 Inch Inlet Exhaust Tip, Qiilu Tail Throat Glossy Carbon Fiber Red Pipe Straight 2.5in Inlet 3.5in Outlet Single Outlet

  • [ Applicable Model ] 6.4in total length, 2.5in inlet size and 3.5in outlet size, suitable for 2.4‑2.5in exhaust pipe.car..
  • [ Upgrade Appearance] Carbon fiber look, red inside, stylish and distinctive, perfect for decorating your car..
  • [ Quality Material ] This tail throat is made of high-quality stainless steel and carbon fiber, corrosion-resistant and heat-resistant, high strength, and durable..
  • [ Comfortable Driving ] Enhance the power, providing smoother exhaust, improve driving comfort and experience..
  • [ Easy Installation ] Put the carbon fiber tail throat directly on the exhaust pipe of the original car, and use a wrench to tighten the clamp screw until the tail throat cannot be pulled out.(Please note that this product with logo).
Check Stock

Drill America - DWT64119 1/2\-14 NPS High Speed Steel 4 Flute Straight Pipe Tap, DWT Series

  • Nominal size is that of the pipe fitting being tapped.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Ideal for cutting internal threads in pipe fittings and whenever an extremely tight fit is required.
Check Stock

Titan Tools - 24 Chain Wrench (21372)

  • 24" handle chain wrench with one-piece forged carbon steel handle and jaw.
  • Double serrated jaw allows rapid, ratcheting, bi-directional action.
Check Stock

WORKPRO 2-Pack Pipe Clamps, Aluminum Die-casting Lightweight Tube Clamps for I.D 3/4'' Black Pipe, Firm & Stable Clamping with H-shaped Feet for Woodworking & Metalworking

  • 【Lightweight Construction】The pipe clamps feature lightweight construction by the application of high strength aluminium alloy, 50% lighter than conventional clamps made of die casting iron.
  • 【Firm & Stable Clamping】 With a high-pressure spring and four carbon steel sheets, the clamp makes firm & stable clamping and can hold pipes tightly to fix them in place as you need.
  • 【Ergonomic Handle】The handle features ergonomic design providing smooth rotary, comfortable hand feeling, easier clamping and thus reduce hand fatique.
  • 【Long-lasting Life】The thickened thread screw rod made of carbon steel is wear-resistant and the TPU protective cover can lessen damage to the clamps, thus provides longer service life.
  • 【Practical Application】The tube clamp's outer diameter is 1.05 in, which is suitable for inner diameter 3/4 in balck pipes and work as an ideal helper in woodworking and metalworking projects. Just slide the pipe clamp through any length 3/4 in. pipe to hold wood in place for gluing and drilling.
  • NOTE: 2 rings are used on both ends of the tube to prevent clamps from slipping off..
Check Stock

John Boos GT-8 Carbon Steel Grease Interceptor 14.2 Long by 11.2 Tall by 10.5 Wide 8 lbs Grease Capacity

  • This Grease trap has an 8 pound grease capacity and measures 14.2" Long by 11.2" Tall by 10.5" Wide. It measures 2" from top to pipe opening, 7.5" from pipe opening to base.
  • Made from TIG welded 11 gauge (1/8 inch thick) carbon steel with a corrosion resistant coating.
  • Grease Trap features a non skid cover (deck plate) with locking device and removable baffle ensure lid stays securely closed..
  • T-Vent Pipe (Flow Control Tee) is included. Both ends of the Grease Interceptor accept no-hub adapters for steel or plastic.
  • This commercial Grease Trap/Grease Interceptor is certified by the Plumbing and Drainage Institute.
Check Stock

HORUSDY 6-Piece NPT Pipe Tap Set, Sizes Includes 1/8\

  • Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads..
  • Right-hand cutting tool has a clockwise cutting function..
  • NPT Pipe taps sizes includes:1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14NPT, 1"-11.5NPT. Equipped with special storage box..
  • Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts..
  • Uncoated tools have only the base material and do not need any additional treatment or coating, so they can be widely used..
Check Stock

iMeshbean 4\ Deep Well Submersible Pump, with 33 Feet Long Electric Cord ,1 HP, 230V, 60 Hz, 33 GPM, 207 Feet Head Max, Stainless Steel Long Life

  • ★【Technical Specifications】4",1HP, 230V, 5.1Amps , 60Hz,1-1/4” NPT discharge. 8 Impellers;Fits in a 4" casing..
  • ★【Economy & Effective】33GPM max & 207ft head;33ft lengthy electric cord-allows for easy connection.
  • ★【Outstanding Performance】Stainless steel body& permanent magnet motors&thermoplastic impellers -industrial grade heavy duty - guarantees high durability and long-lasting use.
  • ★【Widely Application】 Perfectly convenient for use at home and for factory usage.
  • can be implemented in different types of wells-ash pipe wells, steel pipe wells, or soil wells;Can be used for extracting water from reservoirs, canals, rivers, open water tanks and other water lifting works.
  • ★【 Built-in Controlbox】This item is with a built-in control box, it is for thermal protection, short-cut protection and overload protection (Installing additional check valve is recommended).
Check Stock

iMeshbean® Deep Well Submersible Pump, 1 HP, 115V, 60 Hz, 33 GPM, 207' Head, Stainless Steel, 4\ with 33' Long Power Cord

  • ★【Technical Specifications】4",1HP, 115V, 10.2 Amps , 1-1/4” NPT discharge. 8 Impellers;Fits in a 4" casing..
  • ★【Economy & Effective】33GPM max & 207ft head;33′ lengthy electric cord -allows for easy connection(the Plug and the Power Cord are Cut,you can extend or shorten the power cord depending on your needs.).
  • ★【Outstanding Performance】Stainless steel body& thermoplastic impellers -industrial grade heavy duty - guarantees high durability and long-lasting use.
  • ★【Widely Application】 Perfectly convenient for use at home and for factory usage.
  • can be implemented in different types of wells-ash pipe wells, steel pipe wells, or soil wells;Can be used for extracting water from reservoirs, canals, rivers, open water tanks and other water lifting works.
  • ★【 Built-in Controlbox & Check Valve】This item is with a built-in control box, it is for thermal protection, short-cut protection and overload protection;★【NOTICE】This pump has a built in check valve. However installing additional check valve is recommended.
Check Stock

Tailpipe Cutter 3/4 to 3 Inch, Carbon Steel Chain Exhaust Pipe Cutter Tool, Tube Cutting Pliers for Cutting Exhaust Pipe Copper Pipes

  • Easy Cutting: Use our exhaust tube chain cutter to quickly achieve cutting exhaust pipes, the cutting diameter of the product ranges from 3/4" to 3" (19-76mm), and can cut thin wall pipes up to 2.5mm thick.
  • Unique Design: The tail pipe cutter adopts an adjustable chain lock design, the chain length is 30cm. The riveting process makes our tube cutting pliers not easy to loosen and deform. Fine-tuning screws are designed at the rear of the product to ensure that the cutter is in close contact with the pipe.
  • High-Quality Material: The exhaust tail pipe cutter is made of high-hardness carbon steel material, which is durable, corrosion-resistant, and effectively prolongs the use time of the product. Comfortable coated handle on the surface, safe and non-slip, relieve your hand pressure.
  • Wide Range of Applications: Our tailpipe cutter are very suitable for cutting exhaust pipes, plastic pipes, low carbon steel pipes, copper pipes, etc. They can be used without electricity. They are very suitable for you to use outdoors and help you solve the difficult problem of cutting pipes outdoors.
  • Easy to Carry: The exhaust cut off tool is moderate in size, can enter a narrow space for work, and is easy to carry and store, greatly saving your storage space.
Check Stock