Best Carving Vise

Bench Vise 3' Cross Slide Vise Flat Vise Bench clamp Drill Press Vise Clamp Metal Milling Vise Cross Sliding Vise Benchtop Vise

  • 【Size】Maximum jaw is 2.73in, that is 80mm, and vise specification is 3in, which is very convenient.The handwheel has 0.1 mm increments marked by the machine for maximum accuracy. X direction adjustment is 80 mm. Y direction adjustment is 67mm..
  • 【Industrial Strength】With durable high-density aluminum alloy structure, the bench vise is very durable and sturdy.With high-strength accuracy screw, the bench vise is not easy to slip or deform..
  • 【Hand Tool with Rotating Handle 】2 rotatable handles can adjust vise front and back, bolt fixing slot can be fixed..
  • 【Silicone Protection】The gripper is equipped with a removable silicone pad, which can better protect the workpiece during operation..
  • 【Easy to Use】The vise can be used with drill stand and bench drill, etc. Vise is suitable for woodworking and metal processing..
Check Stock

HFS R Parrot Vise Multi-Angle Vise 3.5

  • [MULTIFUNCTION]: This is a Multi-Angle Bench Vise..
  • [ANY ANGLE]: When the jaw is tightened, the vise rotates throughout 360 degrees and then locks at any angle..
  • [POSITION OF CLAMPING]: It is able to clamp in both upright and horizontal positions..
  • [PRECISION]: The casting process and machining is precise..
  • [INCLUDED COMPONENTS]: Parrot VISE Multi-Angle Vise 3.5..
Check Stock

Yost Vises LV-4 Homeowner s Vise | 4.5 Inch Jaw Width with a 3 Inch Jaw Opening Home Vise | Secure Grip with Swivel Base | Assembled with a Combination of Powder Coated Cast Iron and Steel | Blue

  • HOME VISE: Is the perfect tool for your home workshop. Made from heavy duty 65, 000 PSI Ductile Iron castings, 3x stronger than cast iron vises..
  • TECHNICAL SPECS: Jaw Width: 5" (12.7CM) x Jaw Opening: 5" (12.7CM) x Throat Depth: 4" (10.2CM) x Pipe Capacity: 0.125” D x 3.5"D (0.32CM x 8.9CM)..
  • SWIVEL BASE: Vise head rotates 360° with respect to the vertical, locking at every 30° or (12) twelve different locking positions and equipped with a large 3.5" x 2.7" (8.9CM X 6.9CM) anvil work surface..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and/or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
Check Stock

Groz Portable Woodworking Vise, 6-Inch, Clamp on or Bolt to Bench, Cast Iron with \Toe-in\ Feature (39006)

  • Lightweight wood vise for the woodworker hobbyist, yet robust enough for the professional user.
  • Permanently clamp on the workbench via clamping slots or use the 2-5/32” integrated vise clamp.
  • This portable woodworking vise is manufactured from close grained cast iron.
  • Attach wooden liners to protect the vise, the work-piece and working tools.
  • Vise Jaws are equipped with a “TOE-IN” feature.
  • when fully closed, the jaws meet only at the top to provide even clamping on the whole depth of the workpiece.
Check Stock

Riverruns II Generation Rotary Fly Tying Vise Jaw Balanced Truly Extendable Right&Left Hand Fitting

  • Riverruns II Generation fly tying vise is a true extendable rotary action fly tying vise on the market! Any hook hold by the jaws is able to stay at....
  • Jaws set is truly extendable in both horizontal and vertical dimension to accommodating any large flies needed to work on. All vise are equipped both....
  • The jaws clamming system exerts a force of 10:1 ratio on the hook, a rock solid holding. The Jaws of the vise are easy to open and close. They are....
  • The bobbin cradle is very handy and versatile. It can be used as a parachute tool. Simply turn over the unit on the vise stem and then tighten the....
Check Stock

MYTEC Home Vise Clamp-On Vise,2.5

  • HOME VISE: Net weight 3.31 lbs, Maximum width of jaw opening 2.5 inch, Jaw width 2.0 inch.
  • EASY TO INSTALL: This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove.
  • PROTECT TABLE TOP: During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts (To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end).
  • WIDE RANGE OF USES: This vise can hold a variety of parts,O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work.
  • TIPS: Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution..
Check Stock

LAOA Vise-Grip with Wire Cutter Original Locking Tool 5-Inch Curved Jaw Locking Pliers Clamping plier Pipe Wrench

  • LAOA Vise-Grip with Wire Cutter Original Locking Tool 10-Inch Curved Jaw Locking Pliers Clamping plier Pipe Wrench.
Check Stock

MYTEC Home Vise Clamp-On Vise , 3.0"

  • HOME VISE: Net weight 3.62 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch.
  • EASY TO INSTALL: This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove.
  • PROTECT TABLE TOP: During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts (To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end).
  • WIDE RANGE OF USES: This vise can hold a variety of parts,O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work.
  • TIPS: Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution..
Check Stock

Yost M9WW Rapid Acting Wood Working Vise, 9\

  • Heavy duty cast iron and steel construction, predrilled for mounting wood jaw facings,.
  • Quick release level allows for rapidly opening and closing the vise.
  • Fitted with an adjustable front stop (bench dog).
  • Engineered for optimal safety, the fused tommy bar will bend before vise becomes over-stressed.
  • Unique vise design ensures smooth & efficient operation making this vise the most versatile and frequently used tool in your workshop.
Check Stock

Double Ended Pin Vise Model Hand Drill Set with 10 pcs Micro Twist Drill Bits Set for PCB Handicraft Jewelry Watch Making

  • 100% brand new and high quality,This pin vise chuck is adopted of brass material, processed by electroplating, beautiful and durable in use Double ended pin vise design,.
  • Adjustable Pin Vise is the largest and most robust pin vise in our line up of tools.
  • use it in both commerical and home applications ,Pin vice is useful for electronic assembling, tool-making, model making and hobbies,2 chucks,holding size from 0. 5 mm to 3.2 mm Suitable for PCB, handicraft, jewelry, watch making etc.not suitable for steel, iron stone, stone and other hard objects..
  • Holds small drills, deburrers, wires, files, reamers and other small tools that can be difficult to hold while working,Hexagonal heads on both sidesCan be used as hand drill.
  • Drill pin vise has a 3-jaw hardened steel keyless chuck and sturdy plastic handle that is ergonomic and easy to hold ,Compact size is perfect to go in a toolbox or in a pocket.
  • This product contains a double ended pin vise chuck, and 10 pcs different sizes twist drill bit, convenient for your diy project.
Check Stock