IMAYCC Power Concrete Vibrators 1300W 110V Concrete Vibrator with 2m (6.6ft) Copper Shaft Rod
【Powerfull and Efficient】Concrete Vibrator with 1300 Watt motor，13,000 Vibrations Per Minute ,4800rpm, Applicable to consolidate cement and remove all the trapped air bubbles to give you the toughest cement..
【Easy to use】The concrete vibrabrater Carry with lightweight and ergonomic handle design is ideal for consistent use.
self-locking switch can be locked by one button,To keep the machine running for a long time, reduce work intensity and relieve finger fatigue..
【Durable and Safe】Thickened and strengthened cast aluminum casing , Enlarge the air outlet and adopt a porous heat dissipation design..
【Lengthened Vibrator】Long Work Area 6.6 ft. long Copper shaft for easy use and long reach,enlarge your work range..
【Widely Applicable】Necessary tool for patching, construction, cement pillar and grape rack pouring, construction of highway, fence and bridge, etc，1 year worry-free after-sale service( free exchange or 100% refund if product was defective as quality problems ).
Sphere Silicone Mold: These resin molds made of high-quality material, smooth, thicker, sturdy and flexible,easy to demold after fully cured and wash....
Possibility: Round ball silicone mold can be use to make orb crystal,geode bath bomb,cement balls,paperweight,homemade soap making, spherical candle,....
These orb molds is suitable for other various casting materials such as polymer clay,cement ,liquid polyclay, epoxy resin, soap, candle, wax, plaster....
Mold Size: These sphere resin molds inner diameter is round in shape and 4" in diameter and 4" deep.
1.Pay Attention:Recommend using rubber bands to tighten when making sphere resin or soap etc. or you may seal the edges of two parts by hot glue to....
MLLIQUEA 2100W Electric Handheld Concrete Mixer Drill, Portable Cement Mixer Stirrer with Rod for Mixing Grout Paint Mortar Mud Plaster, 6 Speed Adjustment 110V
...ials. The use of S type thread makes the mixing effective and thorough, which greatly saves your time and prevents the mortar from splashing around. Comes with two carbon brushes to extend the service life of the concrete mixer..
Overheating Protection - Our concrete mixer machine has enlarged the air outlet, adopts porous heat dissipation design, faster heat dissipation, longer work time, longer service life. When the machine is overheated, the cement mixer will automatically cut off power to protect the motor from burnout, which is safer and more durable..
Simple Operation - Both sides adopt ergonomic double handles and made of special-shaped materials to provide a comfortable grip and better reduce vibration. Help you reduce fatigue and facilitate operation..
Widely Used - MLLIQUEA industrial grade grouting mixer is made of lightweight, durable materials and carbon steel stirring rods, with high quality. Suitable for mixing paint, cement, feed, resin, ink, thin mortar, gypsum, cement adhesives, etc. Which greatly save your labor time..
PRO GRIP CLAMP: Ideal for one-person installation this siding mounting block gauges and support the next course for nailing, with virtually no layout....
SIDING TOOLS: Slide it, lock it, nail it. These hands-free clips are designed to hold the board at the correct height and help install fiber cement....
MOUNTING BLOCK: Our gauges can be adjusted for 5”, 6”, 7” and 8” siding reveals, and the patented Friction-Cam mechanism supports full 12'....
PROFESSIONAL EQUIPMENT: Take your siding project to the next level with our heavy-duty contractor-grade aluminum house siding tool. This product is....
PACTOOL:Trusted for decades, we are the leaders in specialized construction, renovation, and remodeling designs. Our cutting-edge product line....
Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add pigment powder as follows: 1. Calculate the amount of pigment powder to be added according to the pigment powder: cement = 1:25.
3. Pour the pigment powder into the cement. 4. Evenly mix cement and pigment powder. 5. Mix cement and pigment powder with mortar..
Attention method: Ordinary gray cement: 1 pack of 10 lbs gray cement, add 0.3 to 0.5 lbs of pigment, and add 10 lbs of sand.
White cement: 1 pack of 10 lbs white cement, add 0.2 to 0.4 lbs of pigment, and add 10 lbs of sand..
Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir!.
The mixing ratios of this pigment cement is 3-5%. If you are going to color 50 pounds of concrete, we recommend adding about 1.5-2.5 pounds of pigment cement.
If you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement ..And so on.....(If still don't understand the mixing ratios of this pigment cement, please contact us.We will serve you wholeheartedly. T....
HLOFIZI 2-1/2 Inch Carbide Grit Hole Saw Diameter 2.5\ Cutting Through Stucco, Brick, Plaster, Cement Board, Drywall, Hardie Board, Hardwood, PVC with 1-1/2\ Depth, Up to 6X Faster
2.5” hole saw constructed with long-lasting tungsten carbide grit edge, easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
Drilling holes through lots of abrasive materials, stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC.
Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: 7/16" shank, fit 1/2" chuck.
Not recommended for cutting metal sheet, concrete block, cement tile.
100% SATISFACTION GURANTEED: If you are dissatisfied with our 2-1/2” carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
10pcs SDS Plus Concrete Hole Saw Kit Extension Shank Mansonry Cement Wall Drill Bit TCT Core Drill Set Tungsten Hole Cutter for Drilling Brick Concrete Cement Stone
[What You Will Get]: 35mm, 40mm, 50mm, 65mm, 82mm and 110mm core drill bits, SDS+ arbors, pilot drills and a 300mm SDS+ extension shank.
[Tungsten Carbide Tip Drill]: This top-of-the-line TCT (tungsten carbide tip) core set offers faster cutting speeds and longer service life, making....
[Technical Application]: 35mm-45mm hole saw extension concrete cement wall drill bit for drilling water pipe and heating pipe, 55mm-80mm drill for air....
[Durable Material]: This sds plus extension shank hole saw drill bits for concrete cement is very solid, using high-quality alloy welding, for the....
[Widely Used]: This masonry hole saw kit easily drills holes on common wall materials, such as brick, adobe, concrete, cement, and stone, widely used....
Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add toner as follows: 1. Calculate the amount of carbon powder to be added according to the carbon powder: cement = 1:25.
3. Pour the carbon powder into the cement. 4. Evenly mix cement and carbon powder. 5. Mix cement and carbon powder with mortar..
Attention method: Ordinary gray cement: 1 pack of 10 lbs gray cement, add 0.3 to 0.5 lbs of pigment, and add 10 lbs of sand.
White cement: 1 pack of 10 lbs white cement, add 0.2 to 0.4 lbs of pigment, and add 10 lbs of sand..
Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir!.
The mixing ratios of this pigment cement is 3-5%. If you are going to color 50 pounds of concrete, we recommend adding about 1.5-2.5 pounds of pigment cement.
If you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement ..And so on.....(If still don't understand the mixing ratios of this pigment cement, please contact us.We will serve you wholeheartedly. Thanks ).
