Best Ceramic Fiber Equipment

Silco RTV-7500 Multi-Surface Adhesive Silicone Sealant - Neutral Cure - Clear 10.3oz

  • Excellent Adhesion - Use for bonding to plastics, marine applications, boats, PVC, concrete, glass, aluminum, painted surfaces, wood, plywood, stucco, building paper, window wrap, fiber cement, brick, stone, steel, ceramic, porcelain, masonry, plus many other common material surfaces, concrete, glass, aluminum, painted surfaces, wood, plywood, stucco, building paper, window wrap, fiber cement, brick, stone, steel, ceramic, porcelain, masonry, plus many other common material surfaces.
  • Tough, flexible bonds – Permanently flexible, retaining strong bonds even during vibration, structural movement or shock.
  • Ideal in wet, sunny and hot conditions - Waterproof, 50% movement capability, not effected by sunlight, and max temperature up to 400 degrees Fahrenheit.
  • Very Low Odor, Neutral Cure and VOC Compliant.
  • Skin time in 12 minutes, tack free in 25 minutes, full cure in 30 hours.
Check Stock

HANS Sport III Device- Medium Post Anchor SAH Helmet SFI

  • EASY CERAMIC PROTECTION – STA-BIL Ceramic Pro-Guard provides both your lawn mower deck and snowblower chute with superior protection which prevents....
  • NON-STICK FORMULA – This ceramic-infused spray is not only easy to use, but it also saves you time from having to scrape off unwanted build-up of....
  • VERSATILE – Can also be used as a detail spray on the outside of your equipment. Simply spray on and wipe dry. Safe for use on metal and plastic on....
  • DIRECTIONS – Make sure to have a clean, dry surface before applying the STA-BIL Ceramic Pro-Guard. Apply a light layer of the product to the entire....
  • SHELF LIFE – All STA-BIL branded products are good for use up to 2 years after the bottle was opened. Be sure to mark the date you opened the bottle....
Check Stock

Power Stop K6403-36 Front Z36 Truck and Tow Brake Kit

  • Proprietary carbon-fiber ceramic materials enhance the strength of a typical ceramic brake pad compound to handle heavier loads.
  • Low dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE.
  • Drilled & Slotted performance rotors for maximum cooling.
  • Includes stainless steel installation hardware and high temperature ceramic brake lubricant.
  • Fitment: Ford F-250 Super Duty 2019-2013.
Check Stock

ProCom PCNSD25RTA Gas Stove 3-Sided Black Dual Fuel with Remote Control, 23,000 BTU

  • TECHNOLOGY - 23,000 BTU Patented DUAL FUEL TECHNOLOGY using Natural Gas or Liquid Propane Gas which Heats up to 850 sq. ft Area..
  • DEPENDABLE - Remote Control – The control automatically cycles the burner on and off to maintain a desired room temperature, Ideal for greater heat flow that could add the warm atmosphere in your room..
  • STYLISH - 8 hand painted realistic Ceramic Fiber logs using superior ceramic fiber material give a stunning look..
  • ECONOMICAL - 99.9% efficient with Vent Free gas burner. No outside duct or chimney needed! Environmental Protection and Energy Conservation..
  • SAFE - Battery assisted Piezo ignition with Built-in pilot oxygen depletion sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected..
Check Stock

PH PandaHall 50pcs Microwave Kiln Papers, 3 x 3 Inch Ceramic Fiber Paper Hot Melt Kiln Paper Square Shelf Paper Glass Fusing Paper for DIY Fusing Glass Jewelry Microwave Furnace Accessories

  • Ceramic Fiber Insulation: For a perfectly smooth bottom on your glass, should be used with a piece of thinfire paper between the fibre paper and your glass..
  • Square Paper: 3 x 3 inches, 1mm thick, it can be cut into suitable size with scissors, convenient and easy to use..
  • Please note: The microwave kiln paper liner can only be used once..
  • Ceramic Fiber Microwave Kiln: Creates less binder burnout odor, and produces a glossier finish on the shelf side of your project..
  • Application: Use thin shelf paper instead of shelf wash for an ultra smooth finish on the back of your fused piece.
  • A ceramic-impregnated shelf paper that provides excellent separation between glass and kiln shelf..
Check Stock

Gates ACK060822 Belt Drive Kit

  • Original equipment matched idler and tensioner bearings.
  • Original equipment matched timing belt supplied by Mitsubishi.
  • Engine specific water pressure is achieved without excessive load to engine.
  • Aluminum die-cast technology allows for size and weight reduction.
  • Improved strength in body design and carbon ceramic mechanical seals assures leak prevention.
Check Stock

Power Stop K3167-36 Z36 Truck & Tow Front Brake Kit, 6-Lug Setup

  • Proprietary Carbon-Fiber Ceramic Materials Enhance The Strength Of A Typical Ceramic Brake Pad Compound To Handle Heavier Loads.
  • Low Dust Braking Validated Through On-Vehicle 3Rd Party Tests In Los Angeles, Showing On Average 30% Less Dust Versus Oe.
  • Drilled & Slotted Performance Rotors For Maximum Cooling. Bolt-On Ready: No modifications needed to your vehicle.
  • Includes Stainless Steel Installation Hardware And High Temperature Ceramic Brake Lubricant.
Check Stock

Power Stop K2164-36 Front & Rear Z36 Truck and Tow Brake Kit

  • Proprietary carbon-fiber ceramic materials enhance the strength of a typical ceramic brake pad compound to handle heavier loads. Rotor Material- Cast....
  • Low dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE.
  • Drilled & Slotted performance rotors for maximum cooling. Bolt-On Ready: No modifications needed to your vehicle.
  • Includes stainless steel installation hardware and high temperature ceramic brake lubricant.
Check Stock

Power Stop K2813-36 Front & Rear Z36 Truck and Tow Brake Kit

  • Proprietary Carbon-Fiber Ceramic Materials Enhance The Strength Of A Typical Ceramic Brake Pad Compound To Handle Heavier Loads.
  • Low Dust Braking Validated Through On-Vehicle 3Rd Party Tests In Los Angeles, Showing On Average 30% Less Dust Versus Oe.
  • Drilled & Slotted Performance Rotors For Maximum Cooling. Rotor Run Out Is Within 0.0015 And Dtv Tolerance Specification Is Within 0.005.
  • Includes Stainless Steel Installation Hardware And High Temperature Ceramic Brake Lubricant.
Check Stock

LC-LC OM3 MMF Duplex Fiber Optic Patch Cable 1-Meter 3.3-ft

  • A MANUFACTURER - 14 years ISO certified manufacturer, assembly SFP transceiver, fiber patch cords, media converter and networking system..
  • HIGH QUALITY MATERIALS - PVC/LSZH fiber cable.
  • RELIABILITY TESTING - 100% insertion loss test.
  • MMF: Insertion loss≤0.3(dB), Return loss≥-30(dB)..
  • STANDARDS COMPLIANT - TIA/EIA 568-C.3 / 604-10 / 492AAAA, IEC60793-2-10 A1b, CE and RoHS..
  • WIDE APPLICATION - works with all brands of multimode SFP transceivers and fiber optic networks..
Check Stock