Best Ceramic Fuse Holder

YUNPICAR Mini Blade Fuse Holder 18 AWG Waterproof Connector Inline Fuse Holder with 5A ATM Fuses,2 Pack

  • Standard ATS 5A Blade Fuse ,Protecting circuits and electrical equipment. Easy to add additional circuits fit for cars, CD players, fax machines and etc..
  • High-quality :Fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and excellent electrical conductivity..
  • Easy to use:Just directly plug to the existing fuse holder, 18 AWG 9.4in red pigtail wire allow you to cut and splice it into any project. Keep your car and electric device in a safe condition.
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. To enhance moisture-proof and waterproof performance and NOT easy to fall off or let water in.
  • Package Included: 2 X Mini Blade Fuse Holder and 2 X 5A Mini Blade Fuse.
Check Stock

Kicker 46FHD Car 2-Way Mini ANL - AFS Fused Power Wire Distribution Block FHD

  • KICKER brass hardware uses Versa-Gauge connection points with oversized convex screws for rock-solid connections..
  • The wire receptacles work with most size wire for clean, sharp install and a negative-post adapter collar that locks into place for a tight grip..
  • The KICKER FHD Dual Fuse Holder accepts 1/0 – 8 AWG power cables and accommodates any size AFS fuse..
  • FHD AFS Fuse Holder, 1/0-8AWG in/out, Dual Fuse.
Check Stock

6PCS Microwave Fuse Ceramic Fuse 20 Amp 250V for GE WB27X10388 and Whirlpool Kenmore KitchenAid, Jenn-Air, Amana and Magic Chef Other Microwaves

  • Common and universal fuse for home appliance fuse using, 1 year warranty.
  • Total size: 6.35 x 30 mm/ 0.24 x 1.2 inches (diameter x length).
  • High quality ceramic, sand filled- with nickel plated end caps- meet OEM specs, compatible with GE microwaves, replaces GE WB27X10388 Whirlpool, Kenmore, KitchenAid, Jenn-Air, Amana and Magic Chef Microwaves.
  • Main function: these ceramic tube fuse mainly can be applied for protecting the circuit against overload, overcurrent and short circuit, the microwave replacement fuse is filled with sand, when the fuse is burnt out, will not produce glass fragments, safe to use.
  • Warm notice: please turn off power before your replacement, please check the size, rated current and rated voltage carefully before purchase.
Check Stock

6-Way Fuse Block with Ground, 6 Circuit ATC/ATO Fuse Box Holder with Negative Bus, Protection Cover & LED Light Indication, Bolt Terminals, 70 pcs Stick Label, for Auto Marine, Boat,

  • LED WARNING INDICATOR: this fuse block with negative bus can easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected. It is both safe and easy for you to check and replace the blown fuse..
  • WIDE USE: This fuse block holder with ground is suitable for all vehicles with a 10-32 Volt DC power source. So it come with multi-function stickers for DIY your specific need, convenient for examination and repair, easy to troubleshoot in outdoor.
  • widely used in vehicle, car, marine , bus, ship, tanker, subway etc.
  • PREMIUM QUALITY: The 6 way fuse box with ground buss is crafted to perfection with the best quality materials and with special attention to detail so it can be incredibly efficient and durable. The fuse box has LED light indicators and a strong construction for guaranteed results.base:PBT,cap:PC,terminal:Nickel plated copper,screw:Stainless steel,label:PP*70.
  • EASY TO SET UP: No need to worry about getting your fuse box ready to use. This 6 circuit fuse box holder with ground is very easy to install..
  • WITH COVER AND FUSE: Transparent plastic cover with push latch system, easy to operate, splash and dust-proof design. Adds extra protection to your fuse box & fuses. With 12 pcs Blade fuse 2 ....
Check Stock

10 Gauge Fuse Holder - Muhize 10 AWG Waterproof Inline Fuse Holder Standard APR ATO ATC Fuse Holder with 40AMP Standard Fuses 3 Pack

  • PACKAGE INCLUDED - ① MuHize 3 x In-line Standard Blade Fuse Holder (10 Gauge) + 3 x 40 AMP Standard Fuse. ② Suitable for....
  • EXCELLENT WATERPROOF DESIGN - Support up to 40A fuses for 12V DC. It provides a tight-fitting rubber cap with an excellent water-proof design. NEVER....
  • EASY TO USE - Easy to plug into an existing fuse holder without splicing or cutting. Keep your car and electric device in a safe condition.
  • WIDELY APPLICATION - MuHize assorted in-line fuse holder kit commonly fits for standard blade fuses (rating 2Amp-40Amp), Perfect for Car Truck Boat,....
  • HEAVY-DUTY - 10AWG wire, great look and added protection to the circuit. 100% brand new & made from excellent materials, good electrical conductivity,....
Check Stock

HUBBELL WIRING DEVICES HBL2721 Power Entry Plug 3P4W 30A 3PH 250V L15-30P

  • ♪ COMPATIBLE FUSE :Fits for 1A 2A 3A 4A 5A 7.5A 10A 15A 25A 30A ATC/ATO blade fuse.
  • ♪ SAFETY PROTECTION: Heavy duty 16 AWG red color wire, great look and added protection to the original circuit.
  • ♪ WATERPROOF FUSE HOLDER: Unique design of dual slot tight-fitting waterproof great damp-proof and waterproof performance, safe and reliable.
  • ♪ HIGH QUALITY:Made from high quality materials high fatigue resistance, melting resistance and excellent electrical conductivity and easy to....
  • ♪ PACKAGE INCLUDE: 2 x 16 AWG ATC/ATO Inline Fuse Holder.
Check Stock

BUNKER INDUST 10-Way Fuse Box Blade Fuse Block Holder with LED Indicator for Blown Fuse Waterpoof Protection Cover for Car Boat Marine Automotive,Include 20Pcs Blade Fuses and 1Pcs DIY Sticker

  • LED INDICATOR FOR BLOWN FUSE---Each circuit has red LED warning indication.If a fuse blows,the red LED next to the problem fuse will illuminate,allowing you easily identify and replace blown fuses immediately without guessing!.
  • 1 POWER CONNECTION/10 CIRCUIT OUT---Maximum of 30 Amp per circuit & 100 Amp per panel.4-Way Blade Fuse Box can interchangeable or compatible with all automobiles and devices equipped with a 10-33 Volt DC power source..
  • FUSE PROTECTION COVER---A neat clip-on plastic cover that adds extra protection to your fuse box & fuses.Easy to operate, splash and dust-proof design..
  • HEAVY DUTY CONSTRUCTION---This fuse panel has a #10-33 stud for power feed, 250” male quick disconnect terminals, and can take an input voltage of 10 – 33 V DC..
  • PACKAGE INCLUDE---1Pcs 10-Way Fuse Box Holder,1Pcs DIY Sticker,20Pcs Blade Fuses: 5A x 2, 10A x 4, 15A x 4, 20A x 6,30Ax 2,40Ax 2. Note: This box holder is suitable for standard blade fuses(ATO/ATC).Please check the size or shape of fuse before purchasing..
Check Stock

12-Way Fuse Block With ground, 12 Circuit ATC/ATO Fuse Box Holder with negative bus, Protection Cover & LED Light Indication, Bolt Terminals, 70 pcs Stick Label, For Auto Marine, Boat,With 24 pcs Fuse

  • LED WARNING INDICATOR: this fuse block with negative bus can easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected. It is both safe and easy for you to check and replace the blown fuse..
  • WIDE USE: This fuse block holder with ground is suitable for all vehicles with a 10-32 Volt DC power source. So it come with multi-function stickers for DIY your specific need, convenient for examination and repair, easy to troubleshoot in outdoor.
  • widely used in vehicle, car, marine , bus, ship, tanker, subway etc.
  • PREMIUM QUALITY: The 12 way fuse box with ground buss is crafted to perfection with the best quality materials and with special attention to detail so it can be incredibly efficient and durable. The fuse box has LED light indicators and a strong construction for guaranteed results.base:PBT,cap:PC,terminal:Nickel plated copper,screw:Stainless steel,label:PP*70.
  • EASY TO SET UP: No need to worry about getting your fuse box ready to use. This 6 circuit fuse box holder with ground is very easy to install..
  • WITH COVER AND FUSE: Transparent plastic cover with push latch system, easy to operate, splash and dust-proof design. Adds extra protection to your fuse box & fuses. With 24 pcs Blade fuse 6....
Check Stock

CESS AGC (6x30mm) FUSE Holder 10A/15A Panel/Chassis Mount Screw-Off Type (4 PACK)

  • Material: Glass, Metal;Net Weight: 280g.
  • 5x20mm Fuse Holder: 10pcs fuse holder inline screw type with 18 AWG wire, suitable for 5x20mm glass fuse.
  • Current:0.1A, 0.2A , 0.5A , 1A, 2A , 3A , 5A , 8A , 10A, 15A.
  • Dimension : 5 x 20mm/ 2 x 0.5cm/ 0.07" x 0.01"(L*D).
  • 6 x 30mm/ 2.98 x 0.6cm/ 0.11" x 0.02" (L*D).
  • Package included: 150 pcs glass tube fuses + 10 x 18 AWG fuse holders.
Check Stock

Electop 6 Way Fuse Block Blade Fuse Box with Negative Bus 6 Circuit Fuse Holder Fuse Block w/Negative Bus Waterproof Protection Cover Sticker Labels for 12V/24V Automotive Car Truck Boat Marine RV

  • ...tive terminal screw to make your circuit clear at a glance. This device is intended for branch circuit protection and has good conductivity. Max. 32V DC operating voltage. Max. 20 Amp per circuit & 75 Amp per panel..
  • ★【PREMIUM QUALITY & SAFE MATERIAL】Made of environment friendly PBT material, this fuse holder meets all the standards of an ideal fuse box. It is mechanically strong, insulated, heat resistant and flame resistant. There will hardly cause any issue like produce fracture, deformation, combustion or short circuit phenomenon..
  • ★【PROTECTION COVER & PRE-PRINTED DIY STICKERS】Transparent plastic cover with screw nut, easy to operate, splash and dust-proof design. Adds extra protection to your fuse box & fuses. Come with multi-function stickers for DIY your specific need, convenient for examination and repair, easy to troubleshoot in outdoor..
  • ★【WIDE APPICATION】This 6 Circuit Fuse Block widely used in Car, Truck, Boat, Tankers, Marine, SUV, Yacht, RV, Van, Ships etc. Each fuse of fuses box can be connected to any circuit of electrical appliances. For example: car dome light, auto headlight, width lamp, fog lamp, warning lights, car refrigerator, car charger and car fan, car TV.etc..
Check Stock