Good for up to 100 gallon fish tanks.Maximum flow rate of 370GPH from built in pump Pump Power: 35W.
3 media trays capable of handling your choice of filtration media.
Comes with an adjustable spray bar. This is a helpful feature if you want to adjust the output flow from the filter.
Convenient self-priming pump that eliminates the need for manual siphoning.
Single valve disconnect & priming pump ease routine maintenance.
Built in 9 Watt light for controlling algae spores and promoting clear water.
The three flexible media trays allow you to add other filtration media such as SunSun's activated carbons, ceramic rings or bio-balls to achieve excellent mechanical, chemical, and biological filtration. Compare with similar items.
GBJ Face milling Holder 50mm/1.96\ CNC Face Mill End Milling Shell Cutter with APMT1604PDER -DP Shank Face Mill Arbor BAP400R 50-22-4T (BAP400R 50-22-4T+APMT1604PDER Yellow)
☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
☞Package: 1x BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
Grinding Shroud, Proof Grinding Cover, Angle Grinders Accessories + Grinding Wheel for Collecting 150 Type Angle Grinders
4L Alumina Ceramic Lab Planetary Ball Grinding Mill has small volume, complete function, high efficiency and low noise. It is the requisite equipment for mixing, fine grinding, small sample preparing, new product development and small volume high-tech material production..
Four samples with different sizes and materials in one experiment Fast rotational speed, high efficiency and fine granularity.Minimum granularity of grinded products can be as small as 0.1 micron..
The ceramic planetary pulverizer can smash and blend various products of different materials and granularity with dry or wet methods. Cooling of the grinding chamber with a built-in fan for long grinding times..
Automatic and programmable control with LED display. If mated with vacuum ball milling tanks, it can grind samples in vacuum status. It is the ideal facility to acquire research samples for research institutes, universities as well as enterprise laboratories (can acquire four samples in one experiment)..
The ball mill is with steppless speed regulation, it can be used to quickly grind the research sample to the colloidal fineness in the laboratory and also used as sample mixing, homogenization and dispersion. Widely used in geology, soil, metallurgy, electronics, electricity, materia....
☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
☞About the 400R C24-25-200 -2T (0.98" Shank) Milling holder: 40Cr MnTi ,0.98" shank diameter , 0.98" cutting diameter, 7.87" overall length. Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
☞Package: 1x 400R C24-25-200-2T Indexable End Mill with wrench + 10pcs APMT1604PDER ZM1135 colorful hardened carbide inserts.
【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
LE Lematec Sand Blaster Gun Kit for Air Compressor with Continuous Blasting; Pneumatic Tool Rust Remover for Metal and Paint Stripper
The LE LEMATEC Sand Blaster Gun Kit features siphon function for continuous sand blasting. Operating pressure 90-150 PSI with a recommended CFM of 7-12. Includes 1/4" NPT, Quick Start Guide, and a Ceramic Tip..
AS118-2 Sandblaster incorporates Gravity Feed Function if you choose not to be tethered to a siphon-Tube. Works great in any position and as a rust removal for metal..
Our Sand Blasters include Ceramic Tips far superior to traditional sandblasting tips as they will outlast and outperform..
All of LE LEMATECS Sandblaster models feature superior media suction which results in a much more efficient blasting experience saving you time and money..
Supports Various Media types such as Aluminum Oxide, Silica Sand, Soda, and Walnut Shell to name a few. Works great for glass etching and DIY projects..
HSS 12mm x 45 Degree Dovetail Cutter Milling End Mill High Speed Steel
Durable and Sturdy: This Dovetail Milling Cutter is made of high speed steel, so it is wear-resistant, durable, tough, and you can use it for a long time..
Uniform Angle Distribution: This Dovetail Milling Cutter featuring uniform angle distribution and double-edged design has more excellent cutting performance..
Wide Application:This milling cutter with fine workmanship and high quality is suitable for mold steel, alloy steel, carbon steel, tool steel, cast iron and more..
Meet Your Needs: Available in 45 and 60 degree, 8 and 10 flute, and 12mm,14mm,16mm,18mm, 20mm, and 25mm diameter, this Dovetail Milling Cutter can meet your needs..
Satisfaction Guarantee: We strive to bring the product to our customers. If you are not satisfied, please let us know, and we'll do our to make it right.
GBJ Face Mill Milling Holder End Mill Milling Shell Cutter with 10pcs APMT1604PDER R0.8 with BT40 FMB22-45L Shank Face Mill Arbor BAP400R 50-22-4T 50mm/1.96\ (Milling Cutter+10 Inserts+Arbor)
☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
☞Package: 1x BT40-FMB22-45L +1× BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
