(2)Rockville RSG12 12 3Way 1000 Watt 8Ohm Passive DJ PA Speaker +Stands +Cables
What's in the Box: Amplifier, PA microphone, Birth sheet with Dyno-tested power, Mounting Screw Kit, Owner’s manual, Warranty..
Features: Rockville ATOM S20 1600 Watt Peak/440 Watt Dyno-Certified RMS 4 Channel Class AB Marine Stereo Amplifier With Bluetooth, Digital Voltage Display on Amp, Microphone input and PA microphone included, Adjustable Low Pass Filter: 50Hz - 250Hz, Adjustable High Pass Filter: 50Hz - 250Hz, Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue), Rustproof Aluminum heat sink with silver hairline finish, Stainless steel end panels are rustproof, Bottom panel is aluminum and rustproof..
Peak: 2 Ohm: 400 Watts x 4 Channel. 4 Ohm: 260 Watts x 4 Channel. 4 Ohm Bridged: 800 Watts x 2 Channel. (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc).
25 Amp x 2 ATC Fuse, Frequency Response: 10Hz - 50KHz, Bluetooth On Mode LED Indicator, Status Mode LED Indicator, 8 Volt Preamp Circuitry, RCA Line Output, Bluetooth On and Off Mode Switch, 2CH/4CH Input Mode Switch, Mute and Delay ....
Shocker Hitch Vertical Channel Weld On Tongue Adapter for Trailer A-Frames Completely Welded
Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame. Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame..
Equipped with 6 Adjustment Holes. Raw Steel. The six bolt hole pattern works great with typical vertical channel bolt on trailer couplers. Actual vertical channel is 3-1/2" x 11-3/4" w/ 2" on center bolt pattern.
The outer front is 4" wide, the outer rear is 11" wide. From front to back it measures 7-1/2". Weight Rating: If you are using 2 bolts to attach coupler then its 14,000 lbs if using 4 bolts then 20,000 lbs that also assumes this kit is properly weld onto the trailer and the coupler you are using can handle those respective capacities..
Allows you to convert your trailer a-frame to one that accepts Vertical Channel couplers. Welding required for installation..
3 Style to choose from - Completely Welded, Spot Welded & Components Only (2 Sides,Base & Vertical Channel). Made in the USA by Shocker Hitch - Arthur, ND.
Package Includes: (1) RockvilIe RPM1870 18 Channel 6000w Powered Mixer w/USB, Effects/16 XDR2 Mic Pres. (1) RockvilIe SX1225 12 Channel 25 Foot XLR Snake Cable, 100% OFC, Double Shielded. Features: RockvilIe RPM1870 6000 watt Powered Mixer, 7 Band EQ, 24-Bit Effects, USB, Bluetooth, and 48V Phantom Power. RMS Power Output: 750 Watts x 2 @ 4 Ohm. 500 Watts x 2 @ 8 Ohm. Program Power Output: 1500 Watts x 2 @ 4 Ohm. 1000 Watts x 2 @ 8 Ohm. Peak Power Output: 3000 Watts x 2 @ 4 Ohm.
2000 Watts x 2 @ 8 Ohm. 18 Channel mixer section: 16 mono channels, 1 stereo channel. 18 high-quality XDR2 mic preamps with switchable +48 V phantom power for condenser microphones. XDR2 mic preamps are low-noise and low distortion. These are some of the best sounding mic pres on the market. Built in USB allows you to play songs from your computer or a thumb drives. Built in recording - allows you to record your main mix on to a USB drive. USB supported formats are MP3, WAV, WMA.
Built in advanced bluetooth wireless audio streaming with the most reliable Bluetooth chip on the market. 24 BIT digital effects processor with 16 preset digital effects including (reverb, chorus, delay, chorus, phaser, flanger and various multi-effects). Effects level control can adjust signal level o....
Rockville dB25 2800 Watt/700w CEA RMS 2 Channel Amplifier Car Stereo Amp, Loud!!
... Rockville dB25 2800Watt/1400Watt RMS Class AB 2 Ohm Car Stereo Amplifier With Optical Coupler Technology. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 350 Watts x 2 Channel.
RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc). 2 Ohm: 700 Watts x 2 Channel. 4 Ohm: 460 Watts x 2 Channel. 4 Ohm:Bridged: 1400 Watts x 1 Channel. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm: 1400 Watts x 1 Channel. 4 Ohm 920 Watts x 1 Channel. 4 Ohm:Bridged: 2800 Watts x 1 Channel..
High-Speed MOSFET Power Supply. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Tertiary Supplies Circuitry. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. High Pass Filter: 60Hz -1.2KHz. Full IC-Controlled Protection Circuitry. Fully Adjustable 12dB Bass Equalizer..
CURT 48650 Adjustable Lunette Ring or Coupler Channel 3-Inch ID x 11-3/4-Inch, 2-In Bolt Pattern
HEAVY-DUTY TOWING. This adjustable coupler channel helps provide a heavy-duty towing connection between your truck and trailer. It securely bolts onto your trailer and is commonly used for construction, agriculture and military applications.
ADJUSTABLE INSTALL. For a flexible installation, this lunette ring or coupler mount has multiple holes for easy vertical adjustment of the coupling point. The 11-3/4-inch channel allows for 5 distinct height adjustment positions.
VERSATILE FIT. This coupler channel features an inside width of 3 inches and 2-inch on-center bolt pattern to accept a CURT channel-style lunette ring or coupler (bolt kit #48620 sold separately).
TOUGH BUILD. This lunette ring / coupler channel mount is constructed from solid, one-piece, formed steel for superior strength.
WELD-ON OPTION. This coupler channel comes with a raw steel finish to be easily welded into place and painted with the finish of your choice. It also features holes in the back for a bolt-on option (hardware not included).
CURT 48610 Adjustable Lunette Ring or Coupler Channel 3-Inch ID x 7-1/2-Inch, 2-In Bolt Pattern
HEAVY-DUTY TOWING. This adjustable coupler channel helps provide a heavy-duty towing connection between your truck and trailer. It securely bolts onto your trailer and is commonly used for construction, agriculture and military applications.
ADJUSTABLE INSTALL. For a flexible installation, this lunette ring or coupler mount has multiple holes for easy vertical adjustment of the coupling point. The 7-1/2-inch channel allows for 3 distinct height adjustment positions.
VERSATILE FIT. This coupler channel features an inside width of 3 inches and 2-inch on-center bolt pattern to accept a CURT channel-style lunette ring or coupler (bolt kit #48620 sold separately).
TOUGH BUILD. This lunette ring / coupler channel mount is constructed from solid, one-piece, formed steel for superior strength.
WELD-ON OPTION. This coupler channel comes with a raw steel finish to be easily welded into place and painted with the finish of your choice. It also features holes in the back for a bolt-on option (hardware not included).
Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford....
2 Ohm: 350 Watts x 2 Channel 0.28% THD+N. 4 Ohm 215 Watts x 2 Channel 0.04% THD+N. 4 Ohm: Bridged: 700 Watts x 1 Channel .
Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). 2 Ohm: 1400 Watts x 2 Channels. 4 Ohm: 860....
4 Ohm Bridged: 2800 Watts x 1 Channel. Digital Voltage Display on Amp. High Level Input (Auto ON). High-Speed MOSFET Power Supply. Fully Adjustable....
Wheeler Universal Bench Block with Non-Marring Construction and Multiple Uses for Pistols, Gunsmithing and Maintenance, Original Version
EASE OF USE: Two-sided tool features all channels and holes needed to add or remove parts from most handguns.
VERSATILITY: Works perfectly for assembling and disassembling 1911s as well as 10/22s.
NON-DESTRUCTIVE: Constructed of non-marring urethane.
INCLUDES: Features a main spring removal recess, barrel link removal V channel, rear sight drift channel, front sight stalking channel, hammer and sear pin removal holes, ejector port dressing channel and a rail dressing round bottom channel.
