The wishbone extractor tool is for pushing down the wishbone and other suspension parts for example during the disassembly of the drive shaft or during the replacement or exchange of the wheel bearing..
After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabiliser tension in order to pull the joint from the support..
The joint wedges again in the cone after it was pressed down only briefly with a tyre lever.
The ball joint or gaiter gets damaged, the mechanic injures himself or damages suspension parts when the tyre lever slips away..
With this lever tool the work can be accomplished safely and comfortably by one person (no mauling on your own making it safe and simple to use)..
ABN Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller 5 Piece
Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller, Constructed from high strength steel for extra durability and longevity.
Allows users to easily service all types of front end issues, everything from tie rods, u joints, ball joints, pitman arms, and others.
Includes: 1x Pitman Arm/Tie Rod End Puller, 1x Ball Joint Separator, 1x Pitman Arm Puller, 1x Ball Joint/Tie Rod End Remover, 1x Tie Rod/Inner Bearing Race Puller.
Specifications: Large C-shape puller: (1) 1-11/32" Jaw Spread 2-1/2" Throat Depth, (1) Small C-shape puller 1-1/8" Jaw Spread, 2-1/8" Throat Depth, (1) Large swing arm puller 0 to 2-1/2" Jaw Spread 3-1/4" Throat Depth, (1) Small L-shape puller: 3/4" Jaw Spread, 1-3/4" Throat Depth, (1) Large rocker arm puller: 7/8" Jaw Spread, 2-1/4" Throat Depth.
This is a must have for anyone servicing vehicles.
Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks
ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle..
PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion..
UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles)..
CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch (2....
Bailey Universal Joint Assemblies (Standard Series), Standard U Joint with 1 inch x 1 inch Inner Diameter - Universal Joint with Relubricable Bearings - Standard Rod Ends Ball Joint, 1000 RPM, 2.52 lb
SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 1-inch x 1-inch inner diameter, ¼” keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.52 lb (1.14 kg)..
PRECISE CONTROL: This driveline u joint is ideal for connecting control rods, steering links, etc. It maintains a fixed point of contact between two shafts and can control the movement of the shafts with high precision..
HIGH SPEED OPERATION: This 1000 RPM u joint offers 90 degree deflection and is capable of carrying up to 1000 RPM torque. Thanks to its needle roller bearings, this universal standard joint can tackle big and rigid shafts with ease..
MADE TO LAST: This universal joint is made with durability in mind. Its forged yoke is sturdy, flexible, reliable, and holds up well against high heat. Our universal joint is long-lasting and low maintenance..
MULTIPURPOSE USES: Our steering shaft u joint has a wide variety of applications in automobiles including lightweight, commercial and off-highway vehicles. It offers hassle-free interchange with the Spicer 1000 series..
Front Upper Control Arm with Ball Joint + Outer Tie Rod Ends + Lower Ball Joint Replacement for Ford F-150 for Lincoln Mark LT Suspension Kit - 6pc Set
Compatible with: 2004-2008 for Ford F-150 (New Body (NOT Heritage).
Include: 1x Front Upper Left Control Arm and Ball Joint Assembly.
1x Front Upper Right Control Arm and Ball Joint Assembly.
Excellent Quality : Undergo Impact, Wear, And Fatigue Testing To Help Ensure Quality And Durability.
Quality Warranty: 18-Month Warranty & Best Service!.
Ranger Rear View Mirror, Upgraded kemimoto Rear View Mirror Compatible with Polaris Ranger 500 570 900 XP 1000XP/Crew 2017-2023 (Factory Drop Down Mounting Tab Required)
【Wide Compatibility】kemimoto Ranger rear view mirror is compatible with 2017 2018 2019 2020 2021 2023 Polaris Ranger 500 570 (only 2017-2021) 900 XP 1000 XP/Crew. Please pay attention, this Ranger mirror only fits the models with the factory drop down mounting tab..
【Notch Design and Joint-Ball】This Rear View Mirror for Ranger is improved in the connection between the mirror and the bracket. Notch design and joint-ball stressed by a face can make the mirror more stable when you riding..
【Easy to Adjust with Thumb Screw】The joint ball of the Ranger 1000 mirror can be adjusted by thumb screw without any tools. The joint ball can be rotated 360 degrees to fit your visual need, and it will stay in place and not vibrate when you tighten the screw..
【Height-adjustable & Longer Bracket】The center Ranger rearview mirror has two-height mounting holes and longer bracket for fitting different Ranger models well. You can adjust the height and rearview angle according to your need to get the best vision..
【Additional Support Pad】Compare with others, our Ranger xp mirror is equipped with an additional support pad to reduce mirror cracked. The UTV mirror fragments will be stuck on the pad even it broken, no need to worry it will hurt people..
Orion Motor Tech OMT Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks
1.ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle..
2.PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion..
3.UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (compatible with Ford, GM, Dodge, IHC and Jeep vehicles)..
8629 Wheel Hub Removal Tool & 6007 Lower Control Arm Prying Tool & Brake Caliper Hooks
The wishbone extractor tool is for pushing down the wishbone and other suspension parts for example during the disassembly of the drive shaft or during the replacement or exchange of the wheel bearing..
After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabiliser tension in order to pull the joint from the support..
The joint wedges again in the cone after it was pressed down only briefly with a tyre lever.
The ball joint or gaiter gets damaged, the mechanic injures himself or damages suspension parts when the tyre lever slips away..
With this lever tool the work can be accomplished safely and comfortably by one person (no mauling on your own making it safe and simple to use)..
ARES 12016-15/16-inch Pickle Fork Ball Joint Separator - Tempered Drop Forged Steel Construction - 15/16-Inch Tapered Fork with Non-Slip Knurled Handle
SPECIFICATIONS: The ARES 15/16-inch ball joint separator is 11-7/8-inch long with a 15/16-inch tapered wedge fork opening, so you can easily replace worn out ball joints and even remove CV drive shafts on FWD vehicles..
DESIGN CONSIDERATIONS: Our 15/16-inch ball joint separator is constructed from tempered drop forged steel for enhanced durability and features a knurled handle to ensure a steady grip during use..
APPLICATIONS: This tool makes it easy to separate ball joints or even remove CV drive shafts on FWD vehicles. Just keep a grip on the knurled shaft and add extra force with a hammer as needed..
RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools that make an impact. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Ball Joint Separator, simply contact customer service for troubleshooting help, parts, replacement, or refund..
ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of th....
