Reciprocating Saw Goldsea (Christmas Discounts) Cordless Reciprocating Saw with Clamping Jaw,2pcs 2.0Ah Li-Ion Battery with 1 Hour Fast Charger
Extra Battery: This reciprocating saw provides two 2.0A batteries. When one of the batteries runs out, the other can provide new power. There is a remaining battery reminder on the saw body, so you don't need to worry about the troubles caused by sudden power failure. It only takes 90 minutes to fully recharge the battery..
Safe Design: This reciprocating saw will only start working when the safety button and the start button are pressed at the same time, so that accidents can be avoided. The safety button can be pressed on the front or the back, so that the saw can be used by left or right-handed people. It also comes with a clamping jaw, which can easily fix the saw on the branch and achieve fast cutting..
Powerful Motor: This reciprocating saw is equipped with a high-efficiency motor that provides variable speeds from 0-2700 rpm, making it easy to cut through hard-to-reach areas. The lockable jaws keep the blade in place without loosening, while making it easy to change the blade. The included 8 blades can also meet your daily work needs..
Lightweight: This reciprocating saw weighs only 1.2kg / 2.6 pounds, even women can easily operate it. The grip with non-slip rubber reduces hand slip during cutting, and it doesn't have the toxic rubber smell that ....
M18 cordless 1/2 in. hammer drill/driver with Milwaukee 4 pole frameless motor delivers 550 in.-lb. of peak torque at 0 - 450/0 - 1,700 RPM and 29,000 BPM.
M18 cordless Sawzall reciprocating saw with gear-protecting clutch and counter balance mechanism.
Milwaukee 2694-22 includes a carrying case for storage and tool transport.
Red lithium advantage:productivity: 40% more run-time, 20% more speed, 20% more torque, fade free power. Durability: Operates down to 0/-18, runs 20% cooler, up to 50% more recharges, no memory effect.
Includes: One M18 Compact 1/2" Hammer Drill/Driver (2607-20).
Two M18 REDLITHIUM XC Extended Capacity Battery (48-11-1828).
CR-10S 3D Printers Original Replacement Parts/Accessories Full Assemble MK8 Extruder Hot End Kits with Nozzle 0.4mm /0.2mm /0.3mm /0.5mm fit for Creality 3D Printing Printer CR-10 CR-10S S4 S5
Creality CR10 Extruder,100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY.
MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY /STANIESS STEEL/BRASS.
CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
MK8 CR10 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 12V 40W..
TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
EFFICIENT: The Bosch CRS180B reciprocating saw delivers 1-1 8-inch stroke to remove more material per stroke. With a Bosch exclusive Lockjaw blade holder for fast one-handed blade changes, this reciprocating saw is built for speed and efficiency..
VERSATILE: With 2 included speed ranges, 0-2,400 SPM and 0-2,700 SPM, the reciprocating saw allows you to match the speed of the tool to the application. It easily handles multiple materials.
CONVENIENT: The cordless saw also features a variable speed trigger which allows the user to ease into the cut without any kickback. At only 7.6 lbs, the Bosch CRS180B is convenient for over-head cutting..
ERGONOMIC: The saw provides an ergonomically shaped handle with comfort zone in the soft-grip area for a secure hold and low user fatigue.
COMPACT: The Bosch CRS180B’s compact size makes it easier to get into tight spaces where other reciprocating saws won’t fit. A lightweight tool means less fatigue and this saw delivers the best power-to-weight ratio in its class..
Compact size makes it easier to get into tight spaces.
2-speed allows you to adjust to the material your up against.
Lock-Jaw blade holder is the easiest blade change system.
Upgrade 3D Printer Parts MK8 Extruder Aluminum Alloy Block Bowden Extruder 1.75mm Filament for Creality 3D Ender 3,CR-7,CR-8 CR-10 CR-10S CR-10 S4 and CR-10 S5 Left Hand
[UPGRADING] Original Aluminum Drive Feed for Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5, it is stable and durable..
[REPLACEMENT] MK8 extruder drive feed kit, can replace acrylic parts of Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5.
[Easy to use: used] for 1.75mm filament of 3D printer MK8 bowden extruder frame.
[Stable and durable] Full metal aluminum alloy, DIY kit and need to assemble. Metal material extruder kit is more stable and durable than the original....
[Advantage] the metal extruder have better stronger pressure to pushing filament into printer nozzle so will improve the printer's performance. And....
R QIDI TECHNOLOGY i Fast 3D Printer, Industrial Grade Structure, with Dual Extruder for Fast Printing, Super Large Printing Size 330×250×320mm
【Faster printing】Fully industrial-grade structure, using the second-generation Qidi dual Z-axis structure, all of the original motion structure is upgraded to linear guides, with the high temp extruder, the filament extruding is faster and smoother, the printing accuracy is higher .The printing speed is increased by 20%, it is set to print easily at 100cc per hour..
【Freedom in the choice of the filament】 Qidi iFast can print almost all kinds of filaments which suitable for FDM 3D printers on the market, such as PLA ,PLA+ ,ABS ,PETG, NYLON,etc. The iFast 3d printer equipped with a heated chamber, which can be heated to 60°C. The excellent mechanical structure can produce more robust manufacturing-grade parts..
【Freedom in manufacturing of the complex parts】 Qidi iFast is equipped with automatic dual extruder, which can automatically adjust the left and right extruder up and down according to the software. With the PVA (water-soluble) support, it is very suitable for printing manufacturing-level parts with complex structures and realizing precision manufacturing..
【All metal high temp extruder】 Compared with the normal brass nozzles which on the market, it is more durable and prints smoother. The iFast 3d printer is pre-installed with du....
BIQU H2 Extruder V2.0 New Upgraded Dual Gear Extruder 3D Printer Dual Drive Feed Not Stuck for Creality Ender&CR Series Printers Geeetech Anycubic Mega S Printers and Prusa I3 DIY 3D Printer Kits
√【Upgraded Gear Is No Longer Stuck】①The design of output gear modulus is changed from 0.5 to 0.25, reducing gear outer diameter,which can....
√【The Advantages of Upgraded Stainless Steel Gear】H2 extruder V2.0 is upgraded to new high quality stainless steel output and transmission gears....
√【Brand New Titanium&Copper Alloy Heat Break】BIQU H2 extruder V2.0 adopt titanium&copper alloy all metal heat break, the best quality material....
√【High Performance Unique Cooling System】The heat sink structure on H2 extruder V2.0 is optimized to ensure airflow is diverted up and away from....
√【Wide Compatibility】H2 extruder has wide compatibility for variety 3D printer on the market like Creality Ender & CR Series Printers, Geeetech,....
Official Creality Sprite Direct Drive Extruder Pro Kit with 80N Stepper Motor Direct Drive Upgrade Kit for Ender 3 Ender3v2 Ender 3 pro Ender 3 Max Support 1.75MM Filament
Compatible With Ender3 Series - Creality Spirit direct drive extruder upgrade kit compatible with Ender 3, Ender3v2, Ender 3 pro and Ender 3 Max..
All Metal Design - With Compact and light weight design, 54x50x64.3mm small size, 288g weight. Creality Spirit direct drive extruder pro kit perfectly....
Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N....
Dual Gear Feeding, More Stable Printing -The Creality Sprite direct drive extruder adapt double-toothed structure which does not damage filaments,....
Support Printing Flexible and High Temperature Filament - With direct drive extruder and up to 300°C all metal hotend kit, the Spirit direct drive....
