PHUKIMLONG CKS275 2-3/4 Inch Wood Lathe Chuck Set with 1\-8TPI Includes 2.75 Gear Chuck 5 Interchangeable Jaws, 1 Wood Screw,3 Years Warranty
PRODUCT INCLUDES: (1) 2.75 Inch chuck body with 1”-8TPI Thread, (5)self-centering jaw sets, (1) woodworm screw chuck, (1) gear key, (1) Allen wrench, (8) screws, (1) Aluminum storage case.
Jaw Includes: Interchangeable dovetail jaws, step jaws, and internal/external grip jaws , Interchangeable flat lathe chuck jaws with 8Ea*short and 8Ea*long multi-position grip-studs.
Material: PHUKIMLONG Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with Black oxidation treatment. for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life..
Application: This CKS275 2-3/4"Wood Lathe Chuck Set includes a 4-jaw self-centering chuck and interchangeable jaws for bowls, spindles, and hard-to-hold projects..
LIFETIME WARRANTY: PHUKIMLONG are committed to provide the best service for our customer on Amazon, if you have any questions about the product, please contact us, we will provide you with a satisfactory answer..
Mudder 5 Pieces 1/4 Inch Air Chuck Set Including S690 Dual Head Air Chuck, Open Flow Chuck and Closed Flow Straight Tire Chuck with Clip for Tire Inflator Pressure Gauge Supplies
Package includes: there are 1 piece of S690 dual head air chuck, 2 pieces of closed flow air chuck and 2 pieces of open flow ball air chuck with clip, 5 pieces in total, can meet your needs of different needs.
Dual head air chuck: designed with 1/ 4 inch Female national thread, can compatible with tires on trucks, buses, and other 2-in-1 multi-functional air chucks, functional in checking inflation and pressure, the maximum air pressure is 150 pounds per square inch.
Closed flow air chuck: 1/ 4 inch female national thread and rated pressure can be up to 250 pounds per square inch, it enables the shutoff valve to shut down the air flow when the stem is not opened, air only flowed when the chuck is engaged, the straight tire chuck can compatible with valves for most vehicles.
Note: when you take the air chuck to measure pressure or inflate a tire, please use the clip to make sure the chuck to the valve stem for sealing.
Open flow air chuck: designed to compatible with tire inflator gauges, suitable for most, there is a locking clip which can secure to seal the air chuck into place to a valve stem, so you don't need to make the chuck to valve stems, suitable for trucks, buses, cars, bicycles and motorcycles.
Material: our air chuck set is mainly made of bra....
Hromee Heavy Duty Tire Inflator with Pressure Gauge 120PSI with Dual Head Air Chuck and Lock On Tire Chuck, Air Compressor Accessory and Tire Valve Tools
ADVANCED ACCURACY - The Tire inflator with gauge comes pre-calibrated and reads in 2 PSI increments with a range of 20-120 PSI. The accurate reading is within 2% of the exact pressure of your tire. Inflating, deflating and checking tire pressure are all in one tool..
DUAL HEAD CHUCK - 6 Inch Chrome Plated Dual Head Chuck makes tire valves more accessible with the two heads for easier access. To use inner head when the valve is facing inward, which is great for reaching into dually trucks and other challenging angles..
TIRE CHUCKS - The kit also includes 2 other chucks: ball foot air chuck and brass open flow tire chuck for your choose. The locking clip of open flow tire chuck keeps the chuck attached to the valve stem during inflation that prevent it from leaking that ensures the accuracy of testing..
SUPERIOR CONSTRUCTION - Both ends of hybrid inflation hose are connected with brass sleeve. The rugged, all-metal handle is equipped with a solid steel inflation trigger and a separate brass deflation button for quick fine-tuning in case of overshot target pressure..
NO BATTERY REQUIRED - No battery in it so you do not worry about the power. It is a perfect accessory for your car, motorcycle, truck, bike, SUV, RV or ATV with schrader valves. And we equip ot....
Mophorn Lathe Chuck 4inch “C” Series Chuck Self-centering Lathe Chuck Independent 4 Jaws Mini Lathe Chuck Wood Lathe Bowl Chuck for Woodworking Chuck
Premium Quality: The Chuck body is made of quality steel. All guideways and bearing surfaces are precisely machined for better performance. It has high strength and toughness, compression resistance and durability, and long service life..
Self-Centering Chuck: Each jaw can be adjusted to center with superior gripping force, this improves chuck flexibility, clamping most shaped workpieces can also be realized. Round Claw Clamping Range: 1.5"/38 - 2.4"/62 mm mm. Round Claw Support Range: 1.9"/48 - 2.9"/74 mm..
Considerate Design: Chuck diameter: 4 inch / 100 mm compact structure is easy for you to carry, store and operate. We give a universal adapter as a gift for kinds of countries to use, and the precise thread inside and texture outside make the whole looks more pretty..
Complete Accessories: Includes screw chuck stud. It also includes an T-shaped Allen wrench and a set of tightening levers, which give a great help to chuck installation and removal..
Wide Application: Applicable to the general lathe, grinder, milling machine, drilling machine and machine access....
OrangeA Collet Set CAT40 ER32 CAT40 ER16 Spring Steel Collet Chuck Tooling Package for Milling Machine
Spring Steel Design: High grade spring steel frame ensures better overall balance of tool holder assembly. Durable and long lasting. Polished body to be smooth and rust resistance. 6pcs CAT40 End Mill Holders Size: 1/4", 3/8",1/2", 5/8", 3/4", 1".
Both ER32 and ER16 Chuck Gage or projection length is 2.75".
1pcs Precision Keyless Drill Chuck 1/2 Capacity..
Great Accuracy & Speed: CAT40 collet chuck accuracy in Tenth. Collet Set: T.I.R.: 0.0003" or 5 um. Hardened and ground to ensure maximum accuracy. High concentricity. 6pcs CAT40 End Mill Holder in Projection Length: 2.5".
ER32 and ER16 Chuck Gage or projection length is 2.75". Collet Chuck of high speed is balanced to meet all industrial standard. Stable performance..
Multiple Collet Sizes: 12pcs ER32 collets set by 16th: 1/8".
10pcs ER16 collets set: 1/32", 1/16", 3/32", 1/8", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8". Special angled slots increase rigidity. Better overall balance of tool holder assembly. Use with any standard ER collet chucks for coolant-thru tool applications..
Effortless To Operate: Precision collet chucks are designed to be easy to use. V-groove or/and Fully ground flange say it is easy on tool changers for le....
VINWOX SCR4-4 Wood Lathe Chuck, 4-Jaw Self-Centering Chuck, with 1\x8TPI thread & 3/4\x16TPI Adapter, 3 Years Warranty
✅Products include: Included Chuck body, a set of Tightening Levers, T allen wrench, Screw chuck, adapter converts 1'' x 8TPI to 3/4" x 16TPI and Free Automatic Spring Loaded Center Punch, MAKE SURE check your wood lathe FIT first..
✅Internal jaws tighten around workpieces varying from 1-1/2" to 3" (or 3" Square Block). External jaws spread inside of workpieces with pilot holes ranging from 2" to 3-5/8" Included screw chuck provides even more options for supporting your projects.
✅4" sturdy steel body with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground and hardened for long and stable service life. All guideways and bearing surfaces are precisely machined.
✅Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects. Widely used for machine tools and accessories for general lathes and industrial machines.
✅Stable Service and Long Life: VINWOX Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life.
Women s Perfume Set by Elizabeth Taylor Body Lotion Eau de Toilette White Diamonds 3 Piece Set
Immerse yourself in the delightful scent of White Diamonds perfume whenever you want to feel irresistible. Truly feminine and captivating, this classic fragrance was launched in 1991 by the famous actress Elizabeth Taylor for the woman who delights in luxury. Alluring notes of aldehydes, neroli and Amazon lily open this flowery, provocative scent making way for the aura of tuberose and warmer elements of amber, patchouli and sandalwood to create an exciting scent that is perfect for a romantic evening out..
A sensual women’s fragrance that embodies Elizabeth Taylor’s timeless and iconic glamour.
This floral perfume captures Elizabeth’s star quality – radiant, glamorous and beautiful.
A luxurious Floral Chypre fragrance with the endless brilliance of a rare jewel.
This day-to-night scent radiates with the allure of lily, tuberose and sandalwood.
NEIKO 20754A 3/8” Drill Chuck Adapter | Chuck Drill for Impact Drivers with 1/4 Inch Quick Change Shank | Drill Converter Includes 1/2-Inch Adapter for Impact Guns | Hex to Chuck Drill Bit Adapter
TRANSFORMS IMPACT DRIVERS: This mini drill chuck is an easy way to adapt or convert cordless impact drivers, cordless power tools, and wrenches to do....
EASY ON AND OFF: Socket drive chuck adapter has a 3-jaw chuck securely holds round-shank drill bits and includes 1/2 inch adapter to quickly go from....
DRILL CHUCK EXTENSION: This chuck for your impact drill extends the reach of your impact drill or driver. Gives you the freedom of one-handed drilling....
HEX SHANK DRILL: Drill chuck for impact driver has a standard 1/4" hex drive chuck is an excellent fit to power tools and is constructed of Cr-V metal....
FITS A WIDE RANGE OF BITS: Hand drill adapter is the ideal capacity and clamping range for all drill bit sizes from 1/16” to 3/8” drill bits to....
Hidden Objects – Merry Christmas Magic Holiday & Object Time Puzzle Santa Winter Game
Pat Benatar, Bananarama, Billy Idol, Cyndi Lauper, Madonna, Laura Branigan, Tears for Fears, Stevie Nicks, Phil Collins, Blondie, Roxette, George Michael, Air Supply, Elton John, Wham!, David Bowie, Sting, Bonnie Tyler, U2, Abba, R.E.M, Nirvana, Guns N' Roses, Bon Jovi, Joan Jett, Sheena Easton, Chrissie Hynde, Belinda Carlisle, Suzi Quatro, Janis Joplin, Alice Cooper, The Pretenders, Huey Lewis, Eddie Money, Kenny Loggins, Michael McDonald, Bruce Springsteen, John Mellencamp, The Motels.
Mick Jagger, Luther Vandross, Billy Joel, Paul Young, Machinations, Dan Hartman, Kool & The Gang, Michel Colombier, Bruce Springsteen, Nicole, Linda Ronstadt, Stevie Wonder, Marvin Gaye, Bee Gees, Bobby Caldwell, Neil Diamond, Elton John, Eric Clapton, Rod Stewart, Chuck Berry, Carly Simon, Paul Simon, James Taylor, Carole King, Doobie Brothers, Eagles, Boz Scaggs, Fleetwood Mac, Michael McDonald, Kenny Rogers, Eric Carmen, Rupert Holmes, Melissa Manchester, Roberta Flack, Santana, Bette Midler.
4-Jaw Self-Centering Chuck Set, Z011 Four Jaw Mini Lathe Chucks w/ Connecting Rod & Wrench, Mini Power Lathe Machine Replacement Parts Accessories (Type C)
【3 Jaw or 4 Jaw Self-Centering Chuck Set for Mini Lathe】- Type B comes with 1 x Connecting Rod + 1 x Three Jaw Chuck + 2 pcs x Short Sticks.
Type C - 1 x Connecting Rod + 1 x Four Jaw Chuck + 1 x Wrench. This chuck connecting rod is suitable for Z011 Three Jaw or Four Jaw Woodworking Mini Lathe Chuck..
【Mini Lathe Chuck & Connecting Rod Replacement】- You can use it to replace the old or brocken one. The clamping range of this chuck is between 1.8-56mm, which is suitable for clamping a variety of industrial parts..
【Compact Size, Easy to Use】- Mini Lathe Chuck diameter about 48mm, Outer diameter about 12 mm-65 mm, Inner diameter about 1,8mm-56mm.
2. Connecting Rod size about 5.2cm x 6mm/2.05x0.24inch (LxD), Connecting Thread about M12x1mm. Perfect for mini metal and wood lathes..
【Stainless Steel Chuck Connecting Rod】- The Connecting Rod is made of High carbon steel material, anticorrosion, not easy to rust, durable and sturdy, ensure it has high hardness and can be reused..
【Practical Power Lathe Accessories】- Our chuck connecting rod is stable and has great performance while using, it is the ideal choose for you. High accurate connecting rod so that they can better fit with the Mini Lathe Machine Parts..
