Best Circular Saws For Beginners

WEN BL0760 7.25-Inch 60-Tooth Carbide-Tipped Professional Ultra Fine-Finish Circular Saw Blade with Cool-Cut Coating

  • Features a 7.25-inch diameter (185 mm), a 5/8-inch arbor (15.875 mm), and a 7000 RPM speed rating.
  • Non-abrasive heat-resistant PTFE cool-cut coating prevents workpiece burns for a higher-quality cut.
  • Ultra-thin 1/16-inch kerf (1.6 mm) provides clean and efficient cuts.
  • Designed with 60 wear-resistant carbide-tipped ATB teeth.
  • Compatible with the majority of 7-1/4-inch miter saws, chop saws, and circular saws.
Check Stock

MOTORHEAD 6-1/2-Inch 24-Tooth Fast Framing Tungsten Carbide Tip Circular Saw Blade Thin Kerf Non-Stick Corrosion-Resistant 5/8” Arbor Universal Corded & Cordless 24T USA-Based Support

  • [ENGINEERED FOR FAST CUTS & FRAMING] – Optimized for fast cross & rip cutting softwoods, hardwoods, plywood, chipboard, multi-board, panels, MDF,....
  • [CORDED OR CORDLESS: FITS ALL 6-1/2” CIRCULAR SAWS] – Fits all corded and cordless 6-1/2” circular saws with a 5/8” arbor..
  • [POWER SAVING & EFFICIENCY MAXIMIZING ULTRA-THIN KERF w/ LONG LASTING TUNGSTEN CARBIDE COATING] – Make more precise cuts for longer. Tungsten....
  • [SMOOTH OPERATOR] – Anti-Kickback design provides smoother cuts with minimal kickback. Features an anti-stick rim that reduces friction and gum-ups..
  • [CRAFTED 4 CRAFTSMEN: LIFETIME USA SUPPORT] – All MOTORHEAD Tools are designed, crafted, and rigorously tested by craftsmen for craftsmen. Protected....
Check Stock

Lackmond Beast Pro Porcelain Saw Blade - 7" Hard Tile Cutting Tool with Thin Kerf Cutting Edge & 5/8" Arbor - BP7

  • CONTINUOUS RIM CONFIGURATION – For clean and precise cuts wet cuts of porcelain and stone tiles.
  • EXPERT DESIGN – The thin Kerf cutting edge eliminates chipping while cutting. The beast porcelain tile blades are engineered with a reinforced silent core hub which ensures straight cuts and reduces noise. Intended to cut porcelain,, marble, granite, an ceramic tiles.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for tile workers, construction workers, carpenters, general contractors, serious DIYers, and tradesmen.
  • EQUIPMENT – Designed to be used on hand grinders, circular saws, hand held saws and chop saws.
Check Stock

S SATC Saw Blade 4 1/2 Circular Saw Blades 100 Teeth Circular Saw Blade for Cutting Soft Metals Wood Plastic Stainless Steel

  • [Sharp Enough]: The circular saw blade with high-density carbide teeth is designed for cutting soft metal and withstands impact, reduces wear and lasts up to longer service life, no warping..
  • [Long-lasting for Use]: Manufactured with durable high-quality alloy steel, this 4 1/2 circular saw blade is hardened, fully polished and chrome-plated with sharper tungsten carbide teeth for durable cutting of wood, plastic, steel, ferrous metals, composites..
  • [Outstanding Performance]: 100 teeth contained, the miter saw blade makes the best smooth, razor-sharp finish cuts in unit time than other blades with the same size, easy, fast, and precise as expected..
  • [Practical Design]: Laser-cut kerf that maximizes the accuracy of the cut while reducing noise and vibration during operation and the unique design which improves airflow, helps to dissipate heat and removes cutting dust both guarantee you a quiet and efficient work environment..
  • [Perfect Fit]: Saw blade set is ideal for machines that will take a 4 1/2 inch blade, specially for 4 1/2 miter saws and slide miter saws..
Check Stock

Genesis GACSB452 4 1/2\ 60-Teeth High Speed Steel Circular Saw Blade , Black

  • Designed to work with the Genesis GCS445SE 4-1/2" Compact Circular Saw.
  • 60 Teeth blade is ideal for cutting Drywall, Wood, and Aluminum.
  • Fits 4-1/2 inch circular saws with 3/8 in. arbor size.
  • WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm..
Check Stock

BOSCH GBA18V80 CORE18V 8.0 Ah Performance Battery

  • PROFACTOR Performance 8.0 Ah battery – delivers 100% more runtime and over 75% more power than the CORE18V 4.0 Ah battery.
  • High-power cells – use enhanced 21700 Cell technology, combined with advanced battery design for greater efficiency, to transfer more power for a longer time.
  • Bosch-exclusive cool pack 2.0 technology – Provides better cooling than the previous-generation cool pack system.
  • Ideal balance of size to power – weighs only 2.14 lbs., but provides performance comparable to much heavier batteries.
  • Designed for high-capacity power tools – for such tools as reciprocating saws, circular saws, grinders and rotary Hammers that require high amounts of power for the most demanding applications.
Check Stock

3 Inch Diamond Saw Blade for Porcelain Tile Granite Marble Ceramics Cutting(5/8 Arbor)

  • Segments Height 8mm, Hole 16mm(5/8")-22.23mm(7/8").
  • HIGH GRADE QUALITY: Hot pressed provides increases durability and long life.
  • SPECIAL: Can be used Dry/Wet, desiggned to provide fast, smooth cutting in a variety of material.
  • VERSATILE: The super thin diamond cutting disc Professional grade for porcelain, ceramic tile, granite, sandstone quartz, marble, brick, slate, cement backer board. It will be a perfect partner for tile installers and general homemade DIYers.
  • APPLICABLE MODELS: Suitable for tile saws, circular saws and hand-held grinders.
Check Stock

Freud D0724PX Diablo ATB Framing and Ripping Carbide Circular Saw Blade with 5/8-Inch Arbor, 2-Pack

  • 7-1/4"x24 tooth framing and construction blade.
  • Blades have laser cut bodies, with perma-shield coating to prevent corrosion, and gumming. Will fit most 7-1/4" circular saws and worm drive saws..
Check Stock

Grinder Wrench Adjustable Pin Spanner Wrench Angle Grinder Lock-Nut Wrench For Grinders

  • ★Pin Spanner Wrench Main Using:The adjustable pin wrench is for use with locknuts on angle grinders when fitting or removing abrasive discs.
  • ★Pin Wrench Fit Modle:Suits most grinders and Lock nuts. Ideal Replacement Pin Wrench For All Angle Grinders, Bench Grinders, Circular Saws, and Mitre Saws etc.
  • ★Pin Spanner Wrench Design: Pin Wrench Easy twist knob adjustment,Adjustable Extent:10-30mm.Heat treated pins for long lasting and strong grip and rubber dipped handle grip for comfort.
  • ★Note:Please allow 1-3 cm difference due to manual measurement.
Check Stock

BORA 50” NGX Clamp Edge Straight Cut Guide for Circular Saws Easy to Use Great for Cross-Cutting Plywood Sheets and Routing Dados 544050

  • Circular Saw Guide For Large Sheets: The Bora Clamp Edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw.
  • Clamps Firmly: This straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won’t leave indentations and is easily adjustable to meet the length of your project.
  • Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use.
  • Use With Any Circular Saw: This guide is compatible with any brand of circular saw, not just Bora Tools. Use it with circular saws, routers, and jigsaws. For big projects, easily increase the length up to 100 in. by adding the Bora NGX 50-inch aluminum extension.
Check Stock