Best Clamp Butt Welded End

abcGoodefg 4 Sets Brass Garden Hose Mender Female and Male Hose Connector 5/8 Hose Fittings Garden Hose Adapter Water Hose End Replacement Repair Kit with Clamp and Rubber Gaskets

  • Standard 5/8″ hose connection — The brass garden hose mender’s diameter is approx. 14mm/ 0.56 inch, fit for 5/8 inch hose for easily insert and remove hoses, please select the corresponding size before placing an order. Brass connector with the stainless tightening clamp you can make it tightly as you want. Work with your garden hose, sprayers, nozzle, etc..
  • Wide applications — This hose end replacement kit can be use to garden hose mender, end hoses male mender, end hoses female mender, hose repair mender. You can use them to repair or replace broken female or male hose connector, connect to male or female quick connector to lengthen the hose, use with water faucet, etc..
  • Easy to Use — This garden hose adapter use to repair and connect the water hose end. Easy to connect and disconnect when replacing the end of the garden hose, quick and easy, no additional tools are required, just by hand, suitable for using with garden hose, pipe tubing, and water equipment system, hose repair mender, etc..
  • Sturdy material — These hose fittings are made of brass, which is rustproof, corrosion resistance and durable, and the stainless steel hoop clamp can avoid garden hose leakage..
  • Packge Included — 4 Male Mender + 4 Female Me....
Check Stock

ZOENHOU 4 PCS 2 Inch Butt Joint Exhaust Band Clamp, 304 Stainless Steel Exhaust Band Clamp Sleeve for Exhaust Pipe, Muffler, Headers, Manifolds, Coupler

  • PREMIUM MATERIAL - The 2 inch exhaust clamp is made from high quality 304 stainless steel, stainless steel material, not easy to rust, corrosion-resistant. Precision-machined, shiny surface with no burr. Inside diameter: 2 inches..
  • EASY INSTALLATION - Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect. It is removable, without welding, and saving time and effort..
  • WIDE RANGE OF APPLICATIONS - Butt joint exhaust clamp suitable for the exhaust system, pipes, muffler. Arc curved face, capability prevent exhaust gas and noise leaks. The exhaust band clamp is reusable without damaging the pipes..
  • PERFECT DESIGN - Our exhaust pipe clamp for exhaust provides a 360-degree full clamping area to generate overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections!.
  • WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our exhaust band clamp sleeve, you can get 30 days of worry-free refund, 7 days of 24-hour service after receiving it. Just remember that your satisfaction is our first priority..
Check Stock

Edsal ER842484W4 Muscle Rack Welded Storage Rack with 4 Shelves, 8000 lb. Capacity, 84' Width x 84' Height x 24' Depth, Black

  • Standing four-shelf storage rack with welded steel end frames, welded steel beams, and wire shelves to support a 2,000-lb. Capacity per shelf.
  • Steel braces on both end frames of unit for rigidity.
  • End frames and posts link together without bolts to facilitate rapid assembly or rapid adjustment of shelf height.
  • Assembly instructions included, Tools for assembly sold separately.
Check Stock

Kenosha Iron 3 Ft Wrought Iron Handrail Staircase Porch Deck Railing- Made in America- Wall Mounted Black Metallic Indoor Outdoor

  • Made in America Custom fabricated in our family shop..
  • Iron handrail brackets welded at 7 from each end. (Not Adjustable).
  • Exterior installation kit provided - Masonry bit-2 black oxide bolts - washers & masonry anchors..
  • Interior installation hardware not included. (Welded brackets will not line up with your stud location}..
  • Painted Black Metallic- 3 long from end to end 2 Clearance between handrail and wall..
  • Fits 2-3 Stairs- Measure specific for your needs..
  • Outdoor railing, Outdoor handrail, Outdoor stair railing, Metal handrails outdoor..
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

WeiSen Gloss Black 12" Ape Hanger Chizeled Easy Wire Handlebar Compatible with Harley Dyna Softail Sportster XL 883 1200 & 1994-2023 Road King & 1998-2013 Road Glide

  • Fitment: Fit most Harley Dyna Softail Sportster XL 883 1200 & 1994-2023 Road King Model & 1998-2013 Road Glide..
  • Material: Steel pipe (Much Stronger than other's Straight Seam Welded pipe handlebar on the market)Surface Finish: Powder Coated Black (Copper+Nickle+Chrome) ,High Standard Rust-Proof Plating which can be tested by salt spray 48 hours neutral..
  • Bar Diameter: 1-1/4 inch (1.25"). Center Width: 12 inch, Knurl Center to center Width: 5.4 inch & Clamp area Diameter: 1 inch. Grip Area Diameter: 1 inch. End Rise: 12 inch. Overall Width: 30.5 inch. Pullback/Sweep: 8 inch..
  • Model: Horn Ape Hanger Chizeled,Edge Cutting design for easy wiring. Pre-Drilled and Notched for TBW(Throttle By wire)..
  • Package Included: 1x Gloss Black 12" Ape Hanger Horn Easy Wire Handlebar.
Check Stock

DERNORD Stainless Steel 304 Sanitary Fitting Clamp End Cap fits Tri-Clamp Ferrule Flange (3\ (76mm) Tube OD)

  • End cap for closing the end of a pipe or tube.
  • Clamp end connection for a non-permanent seal, providing access to lines.
  • Stainless Steel 304 for resistance to corrosion and high temperatures.
  • Maximum operating pressure rating of 250 psi at 70 degrees F ambient temperature.
  • Fits end pipe from Diameter 76mm, fits 3" Tri-clamp.
Check Stock

Dasen Chrome Ape Hangers Handlebar 12' Rise 1 1/4' Handle Bars Compatible with Harley Davidson Sportster Softail Dyna Touring Road Glide & King Models

  • Fitment: Fit most Harley Dyna Softail Sportster XL 883 1200 & Road King Model & 1998-2013 Road Glide, Fit 1994-2022 Road King (Do not fit Harley Electra Glide,Street Glide & 2014-UP Road Glide, Do not fit 2008-2011 Harley Cross Bones FLSTSB with OEM risers).
  • Finish: Triple Chrome Plating(Copper+Nickle+Chrome). Condition: Aftermarket 100% brand new and high q uality.Material: Steel pipe (Much Stronger than other’s Straight Seam Welded pipe handlebar on the market), superior quality and durable for long service life and rusting resistance..
  • Handle Bar Specifications: Bar Diameter: 1-1/4 inch. Center Width: 10-1/2 inch.Clamp Area Width: 5.37 inch & Diameter: 1 inch. Grip Area Bar Diameter: 1 inch. Pre-Drilled: Yes. End Rise: 12 inch. Model: Monkey Bagger Bar. Overall Width: 35.5 inch. Pullback/Sweep: 8 inch. Knurling Inside Width: 2.5″. Outside Width: 4.5″..
  • Pretty easy to install, no drilling required. Provide more comfortable driving experience and aggressive appearance..
  • Package include: 1x Ape Hangers Handlebar..
Check Stock

DZRZVD-The Bushcraft Backpacker s Grill Grate - Welded Stainless Steel Mesh Upgrade Camping Fire Rated -7.48 X12.6

  • Thank you for your love of our camping grill mesh! The supplementary stock has been put on the shelves！ Welcome to choose!.
  • 1. According to customer feedback and requirements, we have made a brand new upgrade to the grill, which is more suitable for the needs of barbecue....
  • 3. The outer packaging is a black plastic bag, gifted with a 15.75-inch X8.66-inch nylon bundle pocket, more clean and moisture-proof.
  • 4. This grill is suitable for most backpacks, does not take up space, weighs only 300g, easy to carry.
  • 5. The frame is butt welded, and the inner wire and the frame are pressure welded..
Check Stock

KAKA Industrial PBB-4012, 40-Inch Pan and Box Brake Foot Clamp, 12 Gauge Mild Steel, High Accuracy, Great Durability, Easy Operation Sheet Metal Folding Machine

  • Lift gate service will have extra charges and can be requested for you at a discounted rate, please send us a message stating you need the service. A valid phone number is REQUIRED. The carrier will contact you one day before the delivery, please provide a valid phone number..
  • GREAT VERSATILITY. The PBB-4012 foot clamp equips with wide assortment of fingers allowing greater versatility while in operating. Blade gaps adjustment can be done by easily holding knobs.
  • HIGH PRECISION. The sheet metal foot clamp has a high cutting capacity which will up to 12 mild steel combining with the easy operating process, which will achieve the high precise cutting goals.
  • GREAT DURABILITY. The pan and box foot clamp is designed with heavy truss rods and braces ensuring the greater strength and durability and the welded steel plate covers all body sections make sure the foot clamp can be used in a demanding condition for years.
  • PAIN-FREE EASY OPERATION. The sheet metal brake foot clamp is manufactured to clamp the sheet metal with a convenient foot control. It is easy to make repeatable bends by the stop ring. Foot control sheet metal clamping device will free your back and arms while in operating.
Check Stock