SOPOGER Archery Bow Bubble Level Tuning and Mounting String 3D Printing Compound Bow Sight Tuning Level Combo Tool Kit for Compound Bows(Black)
【Optimal material & design】the bow leveling kit is made of impact resistant plastic,3D printing bow string level, high sensitivity bubble and easy to use.Using the archery tuning tools to check the vertical and horizontal of archery accessories.The clamp slot fixing screw is applicable to all kinds of bowstring, which is not easy to fall off when used..
【Adjust the position of D-Loop】The main bow level is fixed on the bow string, and the sub bow level is placed on the arrow shaft.Adjust the position of D-ring according to whether the two level bubbles are horizontal..
【Calibrate sight】Clamp the bow level on the sight and compare it with the horizontal bubble of the sight head to see if it is balanced..
【Debugging the arrow rest】Clamp the bow level on the arrow rest to assist in adjusting the level of the installation part of the arrow rest.Hang the sub level on the arrow shaft to coordinate with the main level to assist in adjusting the arrow rest..
Croch Fishing Rod Holder Boat Rods Holder Folding Holder with Large Clamp Opening 360 Degree Adjustable Fishing Rod Racks Fishing Rod Holder 2 pcs
CLAMP OPENING: MAX. 1.97inch / 7cm. Please kindly check your boat board size before buying..
MATERIAL: Totally made of high quality material --- ANTI-CORROSION & ENVIRONMENTAL PROTECTION..
ADVANCED DESIGN: Versatile twist lock tube. Allows for 360-degree adjustment vertically and horizontally.Can be surfaced or rail mounted..
MORE STABLE:Constructed with high impact resistant heavy duty ABS. May clamp on anywhere firmly. Great for Boats or kayaks, includes stainless steel hardware..
UNIVERSAL FIT: It can adjust rod angle. Compatible with casting, spinning and spincast rod handles..
Damping:Coil Spring , you can add seatpost thim(27.2~28.6/30.0/30.4/30.8/30.9/31.6/33.9) to fit different size MTB Mountain Bike.
With adjustable head, convenient to install. Standard clamp with 2-Bolt Zero Offset head clamp safety.
How to Choose the Size(3 choices):(1) Check the Original Seatpost Size Marked on the body ,choose the same size as the original one.(2) Measure the inside diameter of the frame tube(normally it is not accurate, considering Operator,measuring tool , Temperature,etc.,).(3) Inquire the bike frame seller to get the further information.
Dremel 2500-01 Rotary Tool Multi-Vise, 3-in-1 Attachment with 360 Degree Stationary Vise, Stand-Alone Clamp, and Tool Holder , Grey
Get total control over your project with the Dremel Multi-Vise. The simple-to-use Multi-Vise securely holds your project in place, providing you the freedom to work with both your hands..
The Multi-Vise is a 3-in-1 attachment featuring a stationary vice for your work piece, a stand-alone clamp, and a tool holder for your Dremel Rotary Tool..
Features an easy-to-adjust 360° rotating base and 50° tilt function to work on your project from any angle. The jaws of the clamp include removable rubber caps and V-grooves to increase grip and protection of your work piece and eliminate the risk of scratches on your valuables while clamping..
The quick release button on the Multi-Vise allows you to move, check and re-clamp your work piece with ease and convenience. Vise clamps to any work surface up to 2-1/2 In. thick.
Compatible with most Dremel rotary tools, the Dremel Multi-Vise tool holder turns Dremel rotary tools into a stationary sander, grinder or polisher..
1 Year Manufacturer Warranty & USA-Based Customer Service– Available by chat, email, phone or visit us at our service center in Racine, WI.
Bicycle Seat Shock Absorber Bike Rear Shocks Bicycle Seat Suspension Bike Seat Shock Absorber Suspension Device with Clear Scale for Mountain Road Leisure Bike Bicycle Support Max Load: 330 Pound
... shocks and cossets your bottom, makes your bike ride smoother.Notice:If feel too springy,you can adjust the position down through the scale.If have no bounce to it,please adjust the position up through the scale.Becase It has a shock absorption effect different from position scale.
【Importance】-Since Adjustable Clamp can be adjusted back and forth by sliding, when you determine the position, you must tighten Clamp with hexagon wrench, otherwise it will slide back and forth.
【How to Adjust】-Please adjust the absorber with your saddle against your body size such as your heightweight and so on. It will take more time to adjust,but you will find the best way and have excellent upgrade of your bike..
【Raise the Height of Saddle】-The absorber will raise the height of your saddle around 2inchs to 3.35inchs,So please check if your bicycle can do!.
【Bicycle Rear Shock Absorber】-The Spring device makes your bike ride smooth and keeps your body healthy!.
【Widely Used】-The adjustable spring fits almost bikes on the market,Apply for Mountain Bike, Road Bike, Fixed Gear Bike and so on..
【For Most People】-The absorber bear the weight from 45LBS to 330LBS.So it is suitable for your family..
【Notice】-Please check all details before you order. Th....
Table Balloon Arch Stand Kit, 13Ft Adjustable Reusable Table Balloon Arch Kit with Base High Strength Glass Fiber Pole for DIY Party Wedding Birthday Baby Shower Xmas Festival Merry Christmas Decorations
...ASSEMBLE】The table arch holder Kit Reduce the time of the splice bar, Only 2 Minutes, Take it out and pull it straight Then just link the base on both sides, 2 steps to build the tabletop balloon stand kit! (Tip: Need Two people are required to pick up the straightened pole at the same time and arch it into the C-clamp.).
【ALUMINUM ALLOY C-CLAMP】 Strengthen design The C-clamp wide adjustable range can 6Cm/2.36Inch fit most of the tables, The C-clamp mounts are made from strong engineering aluminum alloy with a sponge pad, will not hurt the table. There is an auxiliary screw tool under the clip, no other tools are needed. (Tip: The clamp fits in a 6cm thickness table, Please check the thickness of your table before you purchase.).
【PACKAGE INCLUDED】The balloon arch stand comes with 10 poles Total length 13Ft glass fiber poles with Bold shock cord inside, 2 aluminum alloy C-clamps, and 30pcs balloon clips, and 2 Tying Tool. Recyclable, The balloon arch garland kit height and width of the balloon arch are adjustable for your table size, Great for all DIY balloon occasions..
【QUALITY SERVICE】The Table Balloon arch kit with base can be used indoors and outdoors, for a birthday party, baby shower party, graduation party, wedding, Christmas, or o....
BTSHUB Inductive Engine Timing Light, Digital Ignition 12V Light Gun Spark Checker with Advance Probe, Xenon Inductive with RPM Readout for Gasoline Car Motorcycle Marine
【FIT FOR】Adapts to all kinds of 12V battery for automobiles, motorcycles, ATVs, personal watercraft, RVs, boats.
【ENIGNE IGNTION SPARK TESTER】Use this ignition spark tester to check the condition of the ignition system at each cylinder without going to expensive mechanics.The spark tester connects between the spark plug and spark plug wire in seconds to troubleshoot dirty spark plug connections, defective points and bad cables or connections..
【EASY TO USE】Super bright Xenon flash, high vis LED display: LCD Display shows RPM and DEGREE. The sensor clip is red and black to distinguish positive and negative poles, easy to use and more secure. It's sliding clamp-on inductive pick-up, for easy and safe hookup..
【ERGONMIC PISTOL GRIP DESIGN】Ergonomically designed with comfortable press keys, great Press feeling and easy operation. And the high quality makes it be worn hardly..
【INATRUCTION】The power supply is 12V with red connecting to positive and black to negative. The high voltage wire induction clamp is clamped on the high voltage line of cylinder with the arrow on the induction clamp pointing to the direction of the spark plug for normal working..
Use of car jump starter: 1)- connect the red battery clamp of jumper cable to the vehicle's positive (+) battery and connect the black to the negative....
PAY ATTENTION PLEASE. When using this item, please be careful when using, this item can NOT be overload, check your device power before using please.....
GDAE10 29 inch Front Forks Shock for 110cc 125c Dirt Pit Bike, Pair 45/48mm Triple Tree Clamp KLX110 SSR125 Hydraulic Handlebar Riser Upside Down (29' for 110cc 125c)
Fork length: 735mm (from leg top to wheel axle centre), or 14" to 17" front wheels.
Upside down triple tree riser front fork end, fit 7/8'' 22mm handle bar.
Features: 100% brand new and high quality, Durable. It could correctly replace the original quality part. Please check the size of your stock front fork for compatibility.
M25 Pipe Starp Clamps 30 Pcs 304 Stainless Steel Rigid Pipe U Bracket with Two Hole Installation, 25mm Pipe Clips Can be Used to Secure Pipes on 1 Inch OD Support Structures
1. Selected Excellent Materials: The pipe clamp is made of high quality 304 stainless steel, which is safe, stable, non-toxic and has strong rust and corrosion resistance, ideal for indoor and outdoor use in wet environments..
2. Common Size: Suits for Diameter pipe 25mm / 0.98".
Thickness: 0.6mm / 0.024" , Please check the size of your pipes and our clamps carefully to getting wrong sizes!.
3. Strong Applicability: The u bracket are widely used in industrial and home decoration scenarios, including plumbing, power supply, plastic steel pipes, gas pipes, indoor toilets, outdoor roof drains, etc..
4. Highly Skilled Forging Technology: After stamping, bending and integration, the rib structure is added to the structure and the strength of the pipe clamp is improved. Make the pipe clamp not easy to be deformed and firmer..
5. Thoughtful Service: Whether before or after purchase, you have any questions about our products, please feel free to contact us by email, I will reply within 24 hours and provide solutions to your 100% satisfaction..
