Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK
30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
PLG Heavy Dutty Garden Hose Repair Fittings Male Hose End Water Hose Connector/Replacement/Mender for All 3/4-inch or 5/8-inch Garden Hose
Heavy Duty ,Fit 5/8 inch or 3/4 inch Garden Hoses,durable, reusable and easy to install.
Broken and Leaking Garden Hose Repair: Save the cost of a new hose with the hose menders and couplings. They are leakproof, rustproof, unbreakable, reusabole and easy to use..
Easy to Install Hose Fittings:Step 1: Examine Hose and Cut.Step 2: Put the Hose Clamp On.Step 3: Insert New End and Clamp.Step 4: Using a screwdriver, attach the clamp that came with the hose repair kit securely around the end of the garden hose..
Water hose connector:Connect garden hose to your hose nozzle,sprinkler,Y hose connector,outdoor faucet,hose to hose connector,faucet to garden hose adapter,water sprayer..
...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
To install fittings, pull up lever on ball lock disconn....
Packaging & Size: 10Pcs M2 duplex wire rope clamps. Total size is 30 x 12 x 15mm/ 1.2 x 0.48 x 0.57inch. Ideal for securing 1/16 inch wire rope or rope fittings..
High Quality Material: Wire rope cable clamp is made of high quality 304 stainless steel material with polished surface, durable and corrosion resistant for long term use..
Duplex Clamp: Double post design for quick opening or closing. Screws and nuts are rolled with precision technology to tighten the rope and reduce nut slippage for greater stability and safety when using steel rope clamp..
Wide Application: 304 stainless steel rope clamp is suitable for marine applications, it can be used for attaching, anchoring, securing, tightening and making rings to adjust length, such as garage doors, cafe light strings, outdoor patio light strings, reins, saddles, harnesses, etc..
After-Sales Guarantee: We insist on the goal of winning your trust with high quality and service. If you have any quality problems after receiving the goods, please contact us in time and we will give you a satisfactory answer as soon as possible..
【Widely Application】This hose clamps set total include 68pcs 8 size black double gripping hose clamps, Perfectly used for air hose, water pipe, automotive fuel line, silicone hose, etc. which are edges smooth will not hurt the pipe, perfect for various silicone/ vinyl tube/ hydrofarm hose fittings..
Cimeton 32Pcs Drip Irrigation Tubing Hole Punch & Fittings Kit, Including 2Pcs Drip Irrigation Pipe Hand Puncher 2-in-One Punch Tools with 30Pcs Drip Irrigation Barbed Plugs End Closure Plugs Fittings
❀【Package Included】: Cimeton drip irrigation tubing punch and fittings kit includes 2pcs drip irrigation tube hand punch (1pc professional hole punch and 1pc 2-in-1 punch tool).
and 30pcs drip irrigation fittings: 20pcs straight barbed plugs and 10pcs figure 8 end closure plugs, 32pcs in total. This is a practical tool kit to meet your daily gardening and irrigation needs..
❀【Long-Lasting】: Made of durable plastic, these punch tools and irrigation fittings are sturdy and safe, non-toxic, have well performance of water, UV and chemical resistance. And the hole punchers have been polished so it will not become dull, which ensure a longer service life..
❀【Tube Hole Punchers】: Our irrigation tube punchers are designed to fit for drip tubing punch and 1/4" fitting insertion use, match with PE pipes with a diameter of 16/20/25mm. Punch hole size measures approx. 3mm. These tube hole punchers are mainly used to drill holes when installing drippers and micro sprinklers in PE pipe to ensure proper insertion of fittings, tubing and emitters for a tighter fit..
❀【Irrigation Fittings】: Our straight barbed plugs are designed for quick connecting two side of 1/4" drip irrigation tubing or filling into a 1/2" drip irrigation pipe, and the....
