ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs
...icle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. But if 0.8L is not enough, remember to add new oil in time.
Easy To Use: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
Specifications and Accessories: 34 oz used fluid bottle, 24 oz filler bottle. 4 Master Cylinder Reservoir Adapters: 1.2....
212A Kit introduction: This is a HIGH QUALITY model kit. Designed by detailed drawing and resource. Suit for building an RC model or a static display model. Hull made by FRP/ABS. Deck&superstructure made by ABS/wood/epoxy sheet (CNC). Detail fitting parts made by casting resin or metal..
All metal parts such as running set made by CNC precision sizing. Kit includes colour decal. Kit includes large size brass photo etch. Kit includes 3D illustrated step by step instruction..
This kit(hull) comes with almost everything that needs to build an RC running model. Kit includes a hull, decks, Injection parts, CNC-sheets, decals, brass photo etch, instructions and other parts for WTC installation. WTC（water tight cylinder）is a sealed cabin that accommodates all machinery and electronic equipment, such as motors, water-Piston, solenoid valve, servo, ESC, ERS, RC....
Silicone Earring Backs, 800 Pcs Soft Rubber Earring Stoppers, Clear Earring Backing Replacement for Stud Post Fishhook Earrings(4 Styles)
4 Style Earring Back - 100 pairs rubber earring backs for each style (total 800pcs), such as flowers, cylinder, bullet clutch and octagon, every styles are small and cute,enough for your daily use and replacement.
Sofe and Safely - All rubber bullet earring clutch Made by high quality clear soft silicone and don't content Phthalates, anti rust and allergy,Perfect for those individuals who may be susceptible to allergy, apart from that, they are soft and durable, comfortable to use.
Protable and light - These earring backs for heavy earring, and all styles clutch ear stopper pad is very light and comfortable wear. Easy slip onto the earring studs or hook back and hold in tight,so you can always get a new pair once it gets yellowing, loosening or missing.
Easy to Storage - These earring clutch sperately packed by each style . Keep it away from kid's since the very small product.
Wide Use - the hole of each pair of earring back is 1mm, so it can help secure your earrings tightly and you do not need to worry about losing them.
Mophorn 110V 750W 1HP Sewing Machine Servo Motor Max Speed 3500RPM Energy Saving Mute Tie Bar Brushless Servo Motor for Industrial Sewing Machine
750W Servomotor: The sewing machine motor is standardly designed with Power: 1hp 750W, Voltage: 110V, Frequency: 60Hz and Speed Control: 500-3500RPM. Braking power, responsive, high sensitivity, low noise drive, almost no vibration, energy saving and environmental protection..
Pure Copper Coils: Servo sewing machine motor features pure copper coils withstanding high temperature working condition. Long lasting and reliable..
Variable Speed Control: Unique tie bar design to make your work easy. Easy to adjust speed up to 3500RPM and motor direction with buttons. Easy to read LED display..
Sturdy Construction Design: High quality plastic and thick metal frame, smooth appearance. Strengthened motor base for increasing stability. Pulley, sprocket cover and mounting hardware included..
Effortless to Install: Smaller and more lightweight than a comparable clutch motor. Easy to install, the same as the general motor installation method, without any modification. Ideal for industrial sewing machine with clutch motor, including high head machine, zigzag seam, layering machine, etc..
Traxxas 59076-3-RED Slayer Pro 4×4 Red TRX 3.3 Engine w/EZ-Start 2 Speed Transm
...arting Polished Resonator dual-chamber tuned pipe Extended chassis from the National Champion Revo 3.3.
Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body Dimensions: Length: 21.5″ (546mm) Width: 9.4″ (238mm) Behind Front Wheels Narrowest Point 11.4 (290mm) at Rear Wheels Widest Point, Heigh.
Part number(s) included (in factory packaging): 59076-3.
Traxxas 59076-3-BLUE Slayer Pro 4×4 Blue TRX 3.3 Engine w/EZ-Start 2 Speed Tran
...arting Polished Resonator dual-chamber tuned pipe Extended chassis from the National Champion Revo 3.3.
Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body Dimensions: Length: 21.5″ (546mm) Width: 9.4″ (238mm) Behind Front Wheels Narrowest Point 11.4 (290mm) at Rear Wheels Widest Point, Heigh.
Part number(s) included (in factory packaging): 59076-3.
CDHPOWER 2 Stroke LD90 Motor w/o CDI -Upgraded pk80 Motor Silver Color Engine-Gas Motorized Bicycle 66cc/80cc
CDHPOWER LD90 Motor w/o CDI and Excluding 2pcs anti vibration black rubber for the motor mount,upgraded pk80 motor.
better adjusting Clutch a little before riding..
Includinhg spark plug and piston kit；Excluding two head plug CDI Box ( Asin for two head plug CDI: B098Q988VJ ).
High hole Piston and Long connecting rod.
Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
FYI: the LD90 motor is compatible with all brand 2 stroke 66cc/80cc gas motor kit.
