Best Cnc Carving Machine

Spetool 90 Degree Carbide V Bits with Tiain Coated 4 Flutes Chamfer End Mill for Caving V Groove and Sign

  • Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length..
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
  • V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..
Check Stock

VFD CNC Spindle Motor Kits:220V 2.2KW CNC VFD+220V 2.2KW 4bearings 400hz 24000rpm Φ80mm Water Cooled Spindle Motor+220V 75W Water Pump+80mm Motor Clamp Mount+5m Water Pipe Factory Direct Sales

  • 【Connection way】The package only supports 220VAC(+/-5%) 1/3 phase voltage input, the input wire is connected to the R and S terminals of the VFD,....
  • 【Parameter Settings】All parameters have been set up, the customer can directly connect and start when receiving the product.
  • 【Package Include】1 x 220V-2.2KW VFD, 1 x2.2KW Φ80mm 24000RPM ER20 Spindle.1 x 220V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m Water Pipe..
  • 【Wide range of applications】The spindle motor applied to: wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized....
  • 【Warranty】1 Year discount replace (The spindle is half a year).If there is an alarm in the product and you do not know how to operate, please....
Check Stock

Vintage Music Is My Language Alien And Headphone Musician T-Shirt

  • FOUR HYBRID DRIVERS: The BASN Metalen in ear monitor equips 2 balanced armature drivers and 2 dynamic drivers per earbud, the iem headphone adds more....
  • EXCELLENT SOUND ISOLATION: BASN Metalen is a professional sound isolation headphones. It's wired earbuds provides premium performance. Clear and clean....
  • SWEATPROOF CNC CARVING: The BASN newest craftsmanship design applies to the appearance of Metalen in ear earbuds, milling resistant all-metal CNC....
  • DETACHABLE MMCX CABLES: This pro iem headset comes with 4.9ft long cables, one is OFC silver-plated audio cable and another fiber cable with inline....
  • COMPLETE EARPHONES KIT FIT: The included components of Metalen in ear monitors are 2 earbuds, 2 cables,1 T-shirt clip,S,M,L size tips and memory....
Check Stock

SpeTool Tapered Ball Nose Spiral Router Bit 1.0mm Tip Diameter (0.5mm Radius) 4.82 Deg for CNC Milling Engraver Carving Bits

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 0.5mm tip diameter, 4.82Deg, TiAlN coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

Rotary Tattoo Machine 1~5mm Cam Stroke Copper Alloy Direct Drive Machine for Lining and Shading, RCA Connections

  • 【Copper Alloy Material】Made of copper alloy, vintage style, beautiful appearance, durable to use.CNC integrated engraving technology, precision carving, fine workmanship.
  • 【Adjustable Stroke Length】Direct adjustment eccentric wheel can adjust the length of the needle 1-5mm, simple operation,meeting different demands.Is the great tattoo tool for professional tattoo artists or beginners.
  • 【Strong Motor】High performance strong motor, has good performance, high power, long service life and needle stability.Suitable for lining and shading use, can work long hours without burning.
  • 【Accurate Size】This frame is integrally formed by precision wire cutting to insure the precision of the size and avoid the error of the size of the manual machine.
  • 【Long-lasting Performance.】Advantage human engineering design, stable quality. Powerful and stable performance can accomplish a wide variety of styles and techniques,can work for a long time.
Check Stock

uxcell 1/4\ Shank T Slot Router Bit 1/8\ Cutting Depth, 2 Flutes High Speed Steel T Track Router Cutter (Gray)

  • overall length: 1.6" (40mm). High-speed steel slot router bit.
  • Applications: Widely used for processing softwoods, hardwoods, chipboard, plywood, and MDF etc. Designed for creating T-slot wall panels and radius edges on the T-slots.
  • Features: T type slot router bit. High-speed steel (HSS) sharp cutting edge, high hardness and long life. Solid hardened steel body with anti-kickback design.
  • How To Use: Use on electric router, carving machine, edge trimmer, CNC and other automatic routers. Shanks of all bits must be inserted in the collet in full length.
  • Warm Tips: Cannot be used to cut ferrous metal and non wood materials. suggested feeding speed: 8-12M/Min.
Check Stock

RS-550s 18v (12v - 20 volts) DC Motor Round Shaft - High Power & Torque for DIY Electric/Electronic Projects, Drills, Robots, RC Vehicals, Remote Controlled Cars/Robot, Saw Repair/Replacement Engine

  • 【PACKAGE INCLUDE】-1pcs 110V/1.5KW Square Spindle Motor(4.3kg,9.5lbs) +1pcs 110V/1.5KW VFD Inverter +13pcs Collets ER11(1mm-7mm) + 20pcs Drill Bits+ 1meter aviation wire +2pcs wrenches.
  • 【ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process.
  • Runout off less than 0.005mm beyond expectation..
  • 【EASY AND FAST TO INSTALL 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.It includes wire and 2 wrenches to connect spindle motor with VFD.It will take just 5 minutes to install all and make all functions running..
  • 【APPLICATION】-Wood/Plastic/Aluminum carving/engraving machine, advertisement engraving machine, CNC router machine, small sized processing center, high speed centrifuge etc..
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied and get all problems resolved..
Check Stock

SpeTool Tapered Ball Nose Router Bit 1/4\ X 3\ with 1.0mm Tip Diameter(0.5mm Radius) Ball Nose End Mill 4.82Deg for CNC Machine Engraving Carving Bits Woodworking H-Si Coated

  • Tapered angle Ball Nose End Mill / Cone Cutters.
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated.
  • Tip Diamter: 1.0mm, Radius: 0.5mm, Flute Length:1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.82Deg.
  • For CNC,Engraving machine, X Carving plywood, hardwood, acrylic, MDF etc.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time.
Check Stock

SpeTool Carbide Ball Nose Router Bit 2.0mm Diamter Tip (1.0mm Radius) Woodwork Metal CNC Engrave Carving Machine Tools 1/4 Shank TiAlN Coat

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 2.0mm tip diameter, 3.92Deg, TiAlN coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

uxcell Forstner Drill Bits 95mm, Tungsten Carbide Wood Hole Saw Auger Opener, Woodworking Hinge Hole Drilling Boring Bit Cutter (Blue, Gray)

  • total length: 88mm. Hex shank, cemented carbide cutter and solid hardened steel body..
  • Applications: Can be used for drilling holes on wood and plastic products, furniture, door hinge. Used on cutting wood, plywood, solid wood boards, MDF, plastics, fiberglass etc.. Forstner drill bit is for ordinary purpose.
  • Features: Tungsten carbide cutting tip with special heat treatment for sharp cutting edge, high hardness, non-burrs and durable use. Arc curve design head for easy chip-removal, more efficient perforation.
  • How To Use: Suitable for bench drill, vertical drilling machine, CNC carving machine. Processing hardwood or other hard materials should be injected with water to improve the quality and accuracy of drilling, and extend the life of the hole opener..
  • Tips: Maximum speed: 1200rpm. Used on desktop (fixed) equipment, and can NOT be used on handheld power tools (such as hand drill or electric drill). Can not drill metal and non-ferrous metal. To avoid causing damage, be sure no nails or other metal objects in wood before drilling. The cutting edge and tip of the opener should be sharpened in time..
Check Stock