Best Cnc Lathe Part

CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving

️【CNC Spindle kit 500W】- 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free)..
️【500W CNC Spindle motor】- Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03..
️【Speed Power Switch】- Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle..
️【 52mm Mount Bracket】- Made of high quality cast aluminum, this spindle motor bracket clamp is strong and durable. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm..
️【ER11 Collet Chuck】- 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine..

Heavy duty heat-treated drill chuck operates with less than 0.004 inches of runout (0.1 mm).
Holds drill bits anywhere from 1/64 to 5/8 inches in diameter.
Easily open and close the three chuck jaws without any tools or keys.
Universal design fits onto any drill press, milling machine, or CNC lathe with a JT33 spindle.
Compatible with WEN models 4208, 4210, 4210T and 4212 drill presses.

Toothless timing blet pulley, use with 20T 5mm bore idler pulley.
Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions.

Used widely in milling machine, CNC engine lathe, gear shaper, hobbing machine, drilling machine or other machinery transmission occassions..
Fast Shipping Guarantee: All parcel will be delivered in 7-15 days.

AIRCRAFT GRADE 6061 - T6 Billet Aluminum Crafted Ends & Barrels.
1.75" OF ADJUSTABILITY - Reverse Threaded for Quick Adjustment.
PREMIUM STAINLESS STEEL HARDWARE IS INCLUDED - FOUR 5/16"-18 x 3/4" Bolts, FOUR 1.25" OD Washers. Our hardware will NOT rust..
WRENCH FLATS on BOTH the Rod Barrel (7/16") AND End Pieces (3/4") for Ease of Tightening. THIS IS NOT TYPICAL OF ALL SPLITTER RODS..
DESIGNED & MANUFACTURED IN THE USA! Our splitter support rods are made in house on our CNC Mill & Lathe resulting in a spectacular splitter support rod. Our rods are considered "universal" and can be used ON CARS, TRUCKS, AND ANY OTHER VEHICLE WHERe APPLICABLE..

Experience a motionless effect with a perfectly balanced and centred spin.
Engineered with a hardened tempered fused silica glass with custom-designed concave shape engineered for the ForeverSpin collection. Optimal shape to....
Precision-machined on a state-of-the-art CNC-lathe in a single operation using only the purest metals and alloys.
High-grade stainless steel and tempered glass result in a strong and very durable spinning base.
Can be flipped around to display a single spinning top for beautiful presentation and creative decoration.

Lathe Machine DIY Parts: Mini Lathe Machine Woodworking Tool is ideal for using in domestic lathe woodworking lathe miniature car tools and other tools.spur center for wood lathe.
High Quality: Mini Lathe Machine Woodworking Tool is made of mental material, good heat resistance, high mechanical strength and durable.mini lathe live center.
Adjustable: Holing depth can be regulated and adjustment.live center for wood lathe.
Easy To Use: High precision, high hardness, highly efficient.wood lathe.
Size: Compact, easy to operate. Tip height: 27mm(appr.), Tip stretchable length: 30mm(appr.), Size: (L) x (W) 10 x 4.3 cm / 3.94" x 1.69"(appr.)..

Suits to the timing belt which is 6mm width..
Contact with the tooth side which minimizes the risk of the belt slipping..
Material: Made of high quality Aluminium alloy, durable, fine workmanship and high transmission accuracy..
Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions..
If any question, please feel free to contact or QA us, BZ 3D is committed to providing you with the best service!.

for use with 7x10 Harbor Freight Mini Lathe, 03911 Homier 7x12 Mini Lathe, 33684 Harbor Freight 7x10 Mini Lathe, 5278 Cummins 7x12 Mini Lathe, 82500 Micro-Mark 7x12 Mini Lathe, 82710 Micro-Mark 7x14 Mini Lathe, G8688 Grizzly 7x12 Mini Lathe.

【SOLID BLADES DESIGN】- The lathe chisels are made from high speed steel(HSS), featuring shrill edge and fine grinding. Durable and accurate design. Our entire shank has been heat treated, it can be used after grinding.This knife is an arc shape milled with a 10mm round bar CNC milling machine..
【8 PCS CHISELS SET】- Chisels range in overall length is about 16.14" (41cm). The lathe tools includes 8 essential chisels: 3 x Gauge Chisel, 2 x Skew Chisel, 1 x Round Nose Scraper, 1 x Standard Parting and 1 x Diamond Parting. One free 5/8" chisel for you. Blades is about about 6.89" (17.5cm) in length..
【SAFE BRASS FERRULES】- High speed steel(HSS) blades are tightly connected to the handle by durable brass ferrules, easuring chisels' safety and reliability while working..
【RELIABLE & STURDY】- Solid wood material handles(Red eucalyptus). Ergonomics design offers it more comfortable while doing turning job. Each tool handle is beautifully turned hardwood that are approximately 9.06"(23cm) long..
【ATTRACTIVE WOOD TOOL BOX】- A wooden case for easy storage and transportation. Compact design. Foam bases to protect wood chisel sets from any damage. Box Size(LxWxH): 17.72" x 12.20" x 1.57" / 45 x 31 x 4 cm..