Best Cnc Lathe Produces

INPANOLS R8 Collet Set with 15 PCS ER40 Collets (0.0004'' Accuracy), R8 ER40 Collet Chuck Set

  • Specially designed for milling, drilling, CNC, tapping, lathe and other clamping tool..
  • Adopt high-quality 65MN high-quality spring steel elastic design, high elasticity, large clamping force, not easy to deform after repeated use..
  • This ER40 Collet Set is tested with high precision. Accuracy and Run-out Tolerance are up to 0.0004"..
Check Stock

CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving

  • ️【CNC Spindle kit 500W】- 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free)..
  • ️【500W CNC Spindle motor】- Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03..
  • ️【Speed Power Switch】- Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle..
  • ️【 52mm Mount Bracket】- Made of high quality cast aluminum, this spindle motor bracket clamp is strong and durable. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm..
  • ️【ER11 Collet Chuck】- 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine..
Check Stock

WEN DPA167H Heavy Duty JT33 Keyless Drill Press Chuck with 1/64 to 5/8-Inch Capacity

  • Heavy duty heat-treated drill chuck operates with less than 0.004 inches of runout (0.1 mm).
  • Holds drill bits anywhere from 1/64 to 5/8 inches in diameter.
  • Easily open and close the three chuck jaws without any tools or keys.
  • Universal design fits onto any drill press, milling machine, or CNC lathe with a JT33 spindle.
  • Compatible with WEN models 4208, 4210, 4210T and 4212 drill presses.
Check Stock

BIQU GT2 5mm Bore Aluminum Toothless Timing Belt Idler Pulley for 3D Printer 6mm Width Timing Belt (Pack of 5pcs)

  • Toothless timing blet pulley, use with 20T 5mm bore idler pulley.
  • Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions.
Check Stock

5M 16T Timing Belt Pulley Gear Synchronous Wheel 5mm Pitch 8mm Bore for 15mm Width Belt (Bore:8mm, Tooth Width: 16mm)

  • Used widely in milling machine, CNC engine lathe, gear shaper, hobbing machine, drilling machine or other machinery transmission occassions..
  • Fast Shipping Guarantee: All parcel will be delivered in 7-15 days.
Check Stock

FS Performance Engineering Silver Splitter Support Rods 6.75-8.5' (Pair)

  • AIRCRAFT GRADE 6061 - T6 Billet Aluminum Crafted Ends & Barrels.
  • 1.75" OF ADJUSTABILITY - Reverse Threaded for Quick Adjustment.
  • PREMIUM STAINLESS STEEL HARDWARE IS INCLUDED - FOUR 5/16"-18 x 3/4" Bolts, FOUR 1.25" OD Washers. Our hardware will NOT rust..
  • WRENCH FLATS on BOTH the Rod Barrel (7/16") AND End Pieces (3/4") for Ease of Tightening. THIS IS NOT TYPICAL OF ALL SPLITTER RODS..
  • DESIGNED & MANUFACTURED IN THE USA! Our splitter support rods are made in house on our CNC Mill & Lathe resulting in a spectacular splitter support rod. Our rods are considered "universal" and can be used ON CARS, TRUCKS, AND ANY OTHER VEHICLE WHERe APPLICABLE..
Check Stock

LEE PRECISION 90697, 6 Cavity Bullet Mold, 45 ACP, 45 Auto Rim, 45 Colt (Long Colt) (.452″ Diameter), 200 Grains, Flat Nose

  • Lathe bored Blocks with steel Bushings and alignment pins.
  • Machined aluminum mold Blocks and hard anodized sprue plate.
  • 6 cavity block produces a .452 diameter 200 grain Round nose bullet.
  • Suitable for cartridges like 45ACP, 45 Colt, etc..
  • Bullet Mold lube and handles sold separately.
Check Stock

CXOYLL Z011A 4-Jaw Chuck for Mini Lathe, Self Centering Mini Lathe Chuck with L-Shaped Wrench, Zinc Alloy Chuck Clamp Accessory Inner Clamping Diameter 1.8-56mm (Silver)

  • 【Z011A 4-Jaw Chuck, FourJaw Mini Lathe Chuck】- 1. 4-jaw design, compact size, easy to use. The Mini lathe tools 4 Jaw Chuck has a large clamping range. Outer diameter about 12 mm-65 mm, Inner diameter: about 1.8mm-56mm..
  • 【Woodworking Accessories Self-centering 4 Jaw Lathe Chuck】- The self-centering lathe part contains a delicate oblique angle gear and pinion gears. They contribute to precise processing progress. Widely used for woodworking lathe..
  • 【Scope Applications of the Zinc Alloy Mini Lathe Chuck】- The 4 Jaw design Lathe Chuck is made of high quality zinc alloy material, wear-resistant, strong and durable. Mainly used for mini metal lathe. Since the changeover and setting time is cut, your lathe can work with higher efficiency..
  • 【Practical Lathe Accessories Self Centering Mini Chuck】- The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • 【Package included】- 1 x Lathe Chuck, 1 x L-shaped Wrench.
  • The 4 Jaw lathe chuck is widely applied to Mini metal lathes for the general turning of shafts and some more delicate materials. It would be the perfect choice for your lathe machin....
Check Stock

ForeverSpin Spinning Base Micron-Polished Hardened Tempered Silica Glass - World Famous Spinning Tops

  • Experience a motionless effect with a perfectly balanced and centred spin.
  • Engineered with a hardened tempered fused silica glass with custom-designed concave shape engineered for the ForeverSpin collection. Optimal shape to....
  • Precision-machined on a state-of-the-art CNC-lathe in a single operation using only the purest metals and alloys.
  • High-grade stainless steel and tempered glass result in a strong and very durable spinning base.
  • Can be flipped around to display a single spinning top for beautiful presentation and creative decoration.
Check Stock

Adjustable Double Bearing Live Center Revolving Center DIY Parts for Mini Lathe Machine Woodworking Tool

  • Lathe Machine DIY Parts: Mini Lathe Machine Woodworking Tool is ideal for using in domestic lathe woodworking lathe miniature car tools and other tools.spur center for wood lathe.
  • High Quality: Mini Lathe Machine Woodworking Tool is made of mental material, good heat resistance, high mechanical strength and durable.mini lathe live center.
  • Adjustable: Holing depth can be regulated and adjustment.live center for wood lathe.
  • Easy To Use: High precision, high hardness, highly efficient.wood lathe.
  • Size: Compact, easy to operate. Tip height: 27mm(appr.), Tip stretchable length: 30mm(appr.), Size: (L) x (W) 10 x 4.3 cm / 3.94" x 1.69"(appr.)..
Check Stock