Fiber Optic Cutter, Thickened Slide Rail 3 in 1 Clamp Fiber Cable Cutting Tool with Hex Wrench for Electrical Repair
STABLE SLIDE RAIL: Using thickened slide rail, which has high rigidity, and the automatic knife return is and not stuck, which is convenient to use..
EFFICIENT CUTTING: The average cutting angle is less than 0.5 degrees, and the 16 sides cutting end face design ensures stable cutting, efficient and reliable..
3 IN 1 CLAMP: This fiber cutter has 3 in 1 clamp design, which can cut 0.9mm pigtail slot, 0.25mm bare fiber slot and 2.5‑3.0mm insulated wire slot..
CNC MACHINING: Manufactured by CNC machining equipment, the fiber cutter has high accuracy and small operating error, with a wide application range..
TUNGSTEN STEEL: The cutting blade is made of tungsten steel, with high hardness, wear resistance and corrosion resistance, has a long service life..
EXCEPTIONAL QUALITY – Crafted with high-grade 303 stainless steel billets by a veteran master machinist to the highest quality standards..
CNC PRECISION MILLED – A total of nine manufacturing operations are required to create a beautiful custom putter to the highest tolerances only attainable from CNC precision machining..
25 YEARS OF RESEARCH – Feedback from golf professionals, metals experts, CNC machinists, and golfers at all skill levels have gone into creating a superb putter that gives you your best performance..
HEADCOVER – Included to keep your putter protected when not in use..
MADE IN USA – Putters crafted 100% from design to production in America’s heartland of Nebraska..
Brass Oil Distributor 5\\/6 Way Adjustable Lube Oil Piston Distributor Value Manifold Block for Centralized Lubrication System(1 in 5 out)
☛【Oil Volume Outlet Can Be Adjusted】The oil volume of each oil outlet can be adjusted to meet the needs of various working scenarios.
☛【Easy To Adjust And Distribute 】The oil separator has a simple and compact structure, and is easy to adjust and distribute evenly.
☛【Wear Resistance And Durable】Using high‑quality brass material, the oil distributor possesses good wear resistance and is durable.
☛【Good Product Performance】Good production technology and air tightness ensure good product performance.
☛【Applicable Widely】 The product is applicable to CNC machining center machinery, production lines and machine tools, forging machinery, die-casting machinery, woodworking machinery and other mechanical equipment lubrication systems.
Carbon Fiber Tripod with Arca Panoramic Ball Head 77.6inch Tall Lightweight Travel Camera Tripod Monopod Accessories Threaded Hole Design Load 33.1lbs/15kg (Carbon Tripod& 2Way Tripod Head)
【More Stable and Lightweight Carbon Fiber Tripod】: All 12 leg tubes and 2 center column tubes are made of thick real 8-layer carbon tubes! Carbon fiber is imported from Japan and hardened by high temperature treatment to be more solid and stable. The main connecting parts are manufactured by CNC machining and polishing and then anodized, not only the structure is more stable, but also looks and feels are better. Weight only 3.5lbs/1.6kg, the latest design of the accessory hole will be a masterstroke.
【Tall Portable 2Way Video Head Camera Tripod】: Inverted storage makes it more compact and portable，max using height is 76.4inch/194cm but storage length of only 18.5inch/47cm, equipped with a mini video tripod head (with extra arca quick release plate), two-section center column with the gravity hook is the standard design, but the accessory hole and the gift of magic hand and phone clip idea is unique to us.
【Multi-function Travel Tripod】: Reverse storage makes it easy to fit into your hiking bag or suitcase, convenient for travel and outdoor photography, one of the legs can be detached into a monopod as a trekking pole, inverted center column can be convenient for micro photography, magic arm and phone clip allow you to add other accessorie....
SpeTool 12501 2 Flutes Carbide CNC End Mill For Aluminum (1/4 Shank, 2.5 inch Long) Router Bit Spiral Mill
Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
The EndMill With Flat Top, 2-Flutes, Large Chip Pocket, Easy Chip Removal..
For Aluminum, Non-ferrous Metal, Plastics, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Slot Machining, Side Face Machining, Hole Machining. Please Adjust the Speed, Feed and Cutting Depth According to Actual Cutting Conditions..
Excellent Material: This pneumatic swing clamping cylinder is made of pure aluminum block through CNC machining center, non-die-casting aluminum, high density and high strength, support long time work..
Hard Oxidation Treatment: The mirror inner wall surface of this pneumatic swing clamping cylinder is hard anodized to prolong the service life of the cylinder..
Protective Layer: The hard protective layer of this pneumatic swing clamping cylinder is not easy to be worn, not easy to be corroded, and can be used in harsh working environments..
Features: This pneumatic swing clamping cylinder has high consistency of water inlet and outlet, quick joint installation, and is not easy to leak.
left-turn-L and right-turn-R are optional..
Use Pressure Range: The pressure range of this pneumatic swing clamping cylinder is 1-7kgf/cm(Kpa)..
Video Fluid Head for Camera Tripod - ULANZI U-190 Mini Pan Tilt Head Small Panoramic Ball Head with Arca Swiss Quick Release Plate Lightweight Filming Equipment for Compact Camera Load up to 6.6lb/3kg
【QUALITY & PORTABLE】Made of genuine 10 layers carbon fiber, the tubes are lighter and stronger but the structure of this tripod is compact ,the....
【2-SECTION ADJUSTABLE CENTER COLUMN】There is an external 2-section adjustable central column coming with the tirpod,after installing it, you can....
【ADJUSTABLE THREE ANGLES】All the three legs can be adjusted to three angles(7°/25°/65°)by putting out the angle adjustment buckles. Equipped....
【STABLE LOW PROFILE】The ball head is designed with a low center of gravity, CNC machining and 44mm/1.73in large ball diameter, making it extremely....
【WARRANTY & PACKAGE】We（INNOREL Technologies Co,.Ltd.） provide 2 years warranty of our products. There is a tripod bag,a tripod....
Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat R0.25-1.0 1/8” Shank TB04A
High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm..
Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best..
Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure ....
