Yakamoz 1/4 Inch Shank 3-Wing Adjustable Slot Cutter Router Bit Set with Bearings | 6-Picecs Slotting Cutting Blades 1/2 Inch Cutting Depth 6 Different Cutting Widths
6 Different Replacement Slot Cutters: 1/16", 3/32", 1/8", 5/32", 3/16" and 1/4" [Cutting Width].
Industrial quality router bits with Anti-Kickback design and CNC balanced with high quality guide bearings..
Made of quality C3 micro-grain carbide, with heat resistant teflon coating to prevent building-up of sawdust, resin, and pitch..
Designed for a router table or desktop woodworking engraving machine like CNC hand-held and table-mounted router. Suitable for solid wood, particleboard, MDF, plywood etc. [Note: Please clamp the shank in right place [See Picture No.4], or it may cause the shank getting bend. And the holder of the blades cannot use as a 1/4 shank, it should not be used on router machines.].
500W CNC Router Machine, MYSWEETY 3020 PLUS CNC Wood Router 3 Axis Desktop CNC Machine for Metal Wood Acrylic MDF with Limit Switches, Emergency-Stop, Working Area 300*200*73 mm(11.81*7.87*2.87 inch)
... All-metal Body】: This 3020 PLUS CNC machine is solidly built with all-metal body structure and upgraded 500W 52mm spindle with E11 collet, more powerful and higher efficiency, making it possible to cut stainless steel, aluminum and other metals.
【High Precision & Stability】: Without any plastic parts. The CNC router is equipped with solid dual steel linear guide rails which are 12mm thick and also come with bearing slides. All-metal X-Z axis part, up to 73mm of vertical travel, more powerful stepper motor, all of these are designed to ensure the movement of the 3-axis faster and more stable, resulting in improved engraving accuracy.
【Larger Working Area】: The working area of the 3020-PLUS router vs the 3018-PRO is larger, increased to 300*200*73mm(11.81*7.87*2.87inch). Our working table with a particular appearance has precise scale lines and a flat working surface, convenient for you to locate and measure the engraving material size. And the high quality emergency stop and 6 limit switches for all-around protection making it more safe to use.
【Wide Compatibility & Easy to Assembly】: The CNC carving machine is compatible with GRBL software and supports Windows XP/7/8/10, Linux and Mac OS (a bit more complicated to operate compared to Wind....
EANOSIC 30 Degree V Groove Router Bit 1/4 Inch Shank, Nano Blue Coated Solid Carbide V Router Bit for CNC Engraving and Carving
INDUSTRIAL GRADE CNC Engraving Bit: Shank: 1/4”.
SOLID CARBIDE AND NANO BLUE COATED: The 30 degree v groove router bit is made of solid carbide. And nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
SUPER LONG LIF The nano new design coating could provide up to 2.5X normal life and a much more smooth cutting edge than uncoated bits..
These are mainly used for engraving machine and CNC machine. A power tool for 2D sculpture, 3D sculpture. perfect for Signmaking, CNC Lettering, V Groove Engraving Artwork & Miter Fold Router Bits..
The CNC Engraving Bit used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic, aluminum and etc..
MYSWEETY CNC 3018Pro-M Engraver Machine Kit, GRBL Control 3 Axis Mini DIY CNC Router Kit, Plastic Acrylic PCB PVC Wood Milling Engraving Machine, with Offline Controller and ER11 and 5mm Extension Rod
⚒️【2-IN-1 CNC 3018 Pro-M】- CNC 3018pro-M DIY Mini CNC Machine features two 5mm acrylic baffles on each side of the machine so that you can safely monitor the engraving process. A great tool for entrance CNC. Able to curved text on daily materials easily. Great for those who are interested in CNC, helping you engrave the model efficiently..
⚒️【Offline Controller】- The offline controller is 1G Capacity.You can control the CNC router without connecting to the computer. The CNC router can be placed wherever you want, such as garage and workshop..
⚒️【New Control Board】- Integrated Driver Chip + Fixed Heat Sink + External Fan + Sturdy Casing to extend the life of the control board, Self-contained short circuit protection, Not easy to damage. 12 Months Warranty..
⚒️【Versatile】- It can work on wood, bamboo, paper, leather, plastic, PCB, acrylic, metal surface paint, metal surface plating etc. It can not work on hard metal, iron, glass, 201/304 stainless steel, jewelry or silver, and other hard things.It is recommended to engrave 0.1-0.3mm each time..
⚒️【Simple Assembly】- Assembly instructions are provided, but if you get stuck, contact us with any questions that arise. Thank you!.
SpeTool Spiral Downdcut Router Bits Extra Long (4 inch) with 1/2 Inch Shank, 1/2 Inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving, Plunge Cut
Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length.
The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
Industrial quality control to ensure best performance.
SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving
Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
Industrial quality control to ensure best performance.
EANOSIC Spiral Router Bits Up Down Compression Bit 1/4 inch Cutting Diameter with Nano Blue Coated, 1/4 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters for Mills Machines
UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
The router bit suit for CNC router and any plunge routers with 1/4" collet..
BAYTORY CNC Spoilboard Surfacing Router Bits 1/4 inch Shank 1 inch Cutting Diameter Carbide Tipped Woodworking Planer Bottom Cleaning Tool Wood Milling Cutter Slab Flattening Surface Planing Bit
3 Wings Wood CNC Surfacing Router Bits: Precise 3 Wings can cut your slab flattening project material quickly and cleanly. 1/4 Inch Shank, 1/4" Cutting height, 1" Cutting Diameter..
High-Quality CNC Router Bit: The sharp carbide tipped bit, made of microcrystalline carbide blades and strong hardened steel, have excellent wear resistance and sharp edges with anti-kickback design. High-precision grinding technology provides excellent abrasion resistance and sharp edges, and precise cutting will reduce chipping and burrs..
Great Design: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoil board, but also for trimming and slotting/grooving..
Wide Range of Applications: Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand).
Applicable Equipment: Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. Wood engraving machines, trimming machines, etc..
SpeTool Carbide Spiral Router Bits Up&Down Compression Bit 1/4 X 1 inch Cutting Size with 1/4 inch Shank for Woodwork CNC Router Bit Engraving Carving Mortise Groove Tools
UP & DOWN solid carbide compression spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for overall length.
The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
The compression cutters are designed with both up and down-cut flutes, combatting delamination on the top and bottom of a workpiece.
The route bit suit for CNC router any brand plunge router with 1/4” collet.
Industrial quality control to ensure best performance.
SpeTool Single Flute (O Flute) Spiral End Mill Aluminum Cutter Carbide Router 1 inch Cutting Length with 1/4Inch Shank for Aluminum Acrylic PVC MDF Plastic
Solid Carbide Spiral Router Bit with 1/4inch Shank and 1/4 inch Cutting Diameter, 1 inch Cutting Length, 2-1/2 inch for Total Length.
Up Cut, Flat Top with Single Flute, Material: HRC55 Tungsten Carbide.
Used for Carving, Cutting, Slotting, Milling, Hollow Cutting in Materials Like Hardwood, Medium Density Board, Nylon, Resin, ABS, Acrylic, PVC, MDF, etc.
The Design of Single Flute, Larger Spiral Chip Space and Mirror Polishing of CNC Router Bit Makes Non-stick Crumbs, Smooth Cutting and Fast Chip-removal.
There are 1 Pieces of CNC Router Bit In One Package, Coming with Storage Case.
