Best Cnc Spindle Less

110V 800w vfd Spindle Package:110V 1.5KW VFD+110V 800w Φ65mm ER11 Water Cooled Spindle Motor+110V Water Pump+65mm Clamp +5m Water Pipe

  • 【Connection way】The package only supports 110VAC(+/-10%) single phase voltage input, the input wire is connected to the R and S terminals of the VFD, and the output wire is connected to the UVW terminal of the motor(pin1=U,pin2=V,pin3=W,pin4=ground).
  • 【Parameter Settings】All parameters have been set up, the customer can directly connect and start when receiving the product.
  • 【Package Include】1 x 110V-2.2KW VFD, 1 x 2.2KW Φ80mm 24000RPM ER20 Spindle .1 x 110V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m Water Pipe..
  • 【Wide range of applications】The spindle motor applied to: wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc..
  • 【Warranty】1 Year replace(The spindle is half a year). Spindle Warranty :Half a year If there is an alarm in the product and you do not know how to operate, please contact the seller.
Check Stock

RATTMMOTOR Air Cooled Spindle Motor 2.2KW 2200W CNC Spindle Motor 220V ER20 φ80mm 3HP 24000RPM 8A 400Hz for CNC Engraving Milling Grind Machine

  • 【Basic Parameters】- Diameter: 80 mm x Length: 195 mm, Power: 2.2KW, Voltage: 220VAC, Current: 8A, Frequency: 0-400Hz, Collet Size: ER20, Runout....
  • 【Cooling Method】- Good heat dissipation effect by adopting fan cooling method, without connecting to water pump and water pipe, it's more....
  • 【Rotation Accuracy】- The rotor has high precision because of precision steel ball retainer, and high temperature resistant grease lubrication....
  • 【Material & Configure】- The spindle has fine workmanship, 3 bearings, stainless steel body and dustproof design make the spindle more durable..
  • 【Main Application 】This spindle motor is mainly designed for CNC router machine and usually used with VFD Inverter, engraving materials such as....
Check Stock

Spindle Motor 2.2kw Square Air Cooled Spindle Motor ER20 Collect 24000rpm 220V 6A 400Hz CNC Spindle Motor for CNC Router Engraving Milling Cutting Machine

  • Wiring: terminal U1 of the spindle is connected to U of the inverter, terminal V1 of the spindle is connected to V of the inverter, terminal W1 of the....
  • Before driving, rotation of the shaft by hand.Spindle high speed rotation caused by temperature rise, use of cooling liquid circulating system to....
  • 4 Bearings, runout less than 0.01mm, power factor is about 0.82-0.87.
  • Precision tapered hole: less than 0.005mm. Note: The spindle speed cannot be lower than 9000rpm.
  • Main application: Wood, Aluminum, Stone, metal, glass, PVC industry.
Check Stock

SainSmart Genmtisu CNC Router Machine Controller Board with ABS Case for CNC 1810-PRO/3018/3018-PRO

  • This controller board is designed for Genmitsu CNC Router 1810-PRO, 3018, and 3018-PRO. It can perfectly compatible with SainSmart Blue Laser Module..
  • Software: GRBL controller, UniversalGcodeSender..
  • Support XYZ three-axis control, spindle and laser module. Support 3 pin and 2 pin lasers (the 2 pin lasers: please connect the white interface " + s-")..
  • Support stepper motor: 12V, the maximum current within 2A, recommended within 1.5A and additional heat. (Any stepper motor 42, 57)..
Check Stock

Intermatic WG1570, 125V 60-Hertz Replacement Time Clock Motor for T101, T103, and T105

  • Made of high quality cast aluminum, this spindle motor bracket clamp is strong and durable.
  • The surface is well finished by sand blast which ensures a better smoothness.
  • Two inner diameter:52mm, 65mm that you can choose for different projects.
  • This motor bracket clamp would be a great replacement for CNC part.
  • Applied to various occasions, such as 3D printing, CNC engraving machines and so on.
Check Stock

CNCTOPBAOS 3 Axis 1310 CNC Router Kit for Metal Cutting Carving,GRBL Offline Controller,USB Mini Desktop Milling Machine for Aluminum Wood Copper PCB Engraving Machine

  • .../cutting,as well as copper, aluminum, and other kinds of soft metal materials..
  • ♞【CNC 1310】 Working area:126mm*88mm*38mm / Machine Dimension: 281mm*281mm*287.5mm /Control Software: Grblcontrol / Lite.fire/Benbox. / Power Supply: DC24V adapter (input: 110VAC-240VAC) / Spindle Motor: 775 spindle motor (12-36V), 24V 8000r/min / Spindle Chuck: ER11 / Stepper Motor: 2-Phase 4-Wire Stepper Motors (1.3A 0.25N.m).
  • ♞【Offline Controller】Main advantages: 1,can operate without connect the computer.
  • 2,Support SD card and TF card at the same time, standard capacity 1G. can write into the root directory G-code files or NC file.
  • Support Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle..
Check Stock

8pcs 1/4\ to 1/8\ Precision Engraving Bit CNC Router Tool Adapter Convert for Engraving Machine ER Collet

  • Spring steel material, extra long life, good flexibility and resistance to abrasion..
  • Clamping force, high accuracy, good gripping stability.
  • For CNC machine tool chuck conversion, conversion size: 1/4” to 1/8”.
  • 8pcs CNC router tool Adapter to meet your need.
  • Commonly used in the engraving machine spindle motor folder knife, with the engraving machine collets use..
Check Stock

ANNOY TOOLS CNC Router Kit, All Metal 3018Pro Upgrade, 500W Spindle Motor with Limit Switch and Emergency Stop,XYZ Working Area 300 x 180 x 60mm, Wood Carving Machine

  • ⭐️Easy to use: 3018pro upgraded version, simple and sturdy construction allows you to assemble it in less than 30 minutes out of the box. Entry-level CNC engraving machine that can provide a good experience for novice as well as wood carving machine enthusiasts..
  • ⭐️Powerful power: The 3018plus body is all made of aluminum alloy, which is stronger and more stable. The spindle adopts 500W motor, different from 775 motor, which can engrave and cut more materials..
  • ⭐️open-source Grbl v1.1,which is suitable for all engraving machine control software based on the same version of GRBL. Support Windows XP, win7, win8, win10, we provide software instructions in the u disk. The package contains assembly instructions..
  • ⭐️Design: Unlike the conventional 3018/3018pro, the Z-axis has a working stroke of 60mm and more room for creation. 52mm diameter Z-axis, leaving a square slot of 40*40mm, is compatible with the laser engraving module. The machine is equipped with 6 limit switches and an emergency stop switch to provide safety for your creations..
  • ⭐️User Experience: In order to bring you a better CNC experience, 24-hour customer service is available online to answer your questions and solve your problems..
Check Stock

Rock BROS Mountain Bike Pedals 9/16 MTB Pedals Aluminum Road Bike Pedals Sealed Bearing Bicycle Lightweight Platform Flat Pedals for BMX MTB

  • ✔SOLID MATERIAL: Road bike pedals is made of Aluminum Alloy with CNC technology. 100% Cr-Mo spindle 9/16 threading with sealed bearing, water-proof & dust-proof..
  • ✔UNIQUE COLOR & DESIGN: Mountain bike pedals has a unique color, the surface is covered a colorful CNC paint. When you install this mtb bike pedals on your bike, your bike must be the most cool bike in your town..
  • ✔ANTI-SKID PINS : 9/16 bike pedals has total 12 pcs stainless-steel hexagon head bolts for an greatly enhanced grip. Non-slip platform maximizes your efficiency at each pedal stroke. Best pedals for adults and kids..
  • ✔EASY TO INSTALL: The adult aluminum bike pedals size is 9/16, easy to install on your bike. Also fit mountain bike pedals, road bike pedals, bmx pedals, exercise bike pedals, fixie bike pedals, folding bike pedals..
  • ✔SEALED BEARING : MTB bike pedals has a really good amount of grease on the inside, the dust cap was tight and fits nicely. The 8mm retention nut on the inside is reverse threaded, which is nice to see and is a good attention to detail. The main spindle is made well and tt fits well and feels sturdy..
Check Stock

VEVOR CNC Machine 4 Axis CNC Router 3040 CNC Router Engraver Machine 500W CNC Router Engraving Drilling Milling Machine MACH3 with Usb Port for DIY Artwork Cutter 4 Axis,3040,500W

  • 【SPECIFIC PARAMETERS】- Working Area: 300x400x55mm (11.8"*7.9"*2.2") Work table dimension 610*450*390mm (24.0"*17.7"*15.4"), Total Power: 500W, Spindle Motor Power:300W DC Spindle Motor.
  • 【DURABLE QUALITY】- Equipped with an aluminum backing plate, this CNC machine is more steady and solid. The chrome shafts are not easy to deform, designed aluminum dust-proof plate for easy cleaning, and suitable for long time use..
  • 【STRONG COMPATIBILITY】- Can be controlled by computer for more precise engraving control. Replace the traditional parallel Interface with USB, suitable for desktop and laptop computers. And compatible with more operating systems(WINDOWS 2000 / XP, WIN7, WIN8, WIN10)..
  • 【HIGH TORQUE TRANSMISSION】- Flexible coupling can be used for high torque transmission. Cover plates greatly reduce the pollution for the screws and shafts. Spindle motor knob can be useful for small positioning adjustment, providing precise engraving..
  • 【MULTIPLE APPLICATION】- Engraving Machine is perfect for the engraving of soft materials such as plastic, wood, acrylic, PVC, PCB, MDF board, advertising signs, etc..
Check Stock