Best Cnc Wire Coiling Machine

Compatible with 2015-2018 Dodge Charger Stainless Steel Black Mesh Grille D76344H

  • ❎ Bolt Over/Overlay/Bolton (Drilling Required) 1 pc Grille Insert.
  • ❎ Black powder coated T-304 stainless steel wire woven mesh grille insert and stainless steel surround frame.
  • 2015-2018 Charger(Not for Daytona and RT SCAT Pack and SRT)*2019-2021 Charger Only for SXT.
  • All necessary hardware and instruction are included. Grille insert only, logo or emblem, frame or shell is NOT included..
Check Stock

RS-550s 18v (12v - 20 volts) DC Motor Round Shaft - High Power & Torque for DIY Electric/Electronic Projects, Drills, Robots, RC Vehicals, Remote Controlled Cars/Robot, Saw Repair/Replacement Engine

  • 【PACKAGE INCLUDE】-1pcs 110V/1.5KW Square Spindle Motor(4.3kg,9.5lbs) +1pcs 110V/1.5KW VFD Inverter +13pcs Collets ER11(1mm-7mm) + 20pcs Drill Bits+ 1meter aviation wire +2pcs wrenches.
  • 【ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process.
  • Runout off less than 0.005mm beyond expectation..
  • 【EASY AND FAST TO INSTALL 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.It includes wire and 2 wrenches to connect spindle motor with VFD.It will take just 5 minutes to install all and make all functions running..
  • 【APPLICATION】-Wood/Plastic/Aluminum carving/engraving machine, advertisement engraving machine, CNC router machine, small sized processing center, high speed centrifuge etc..
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied and get all problems resolved..
Check Stock

Face Mill Shoulder Cutter BAP400R-50-22-4T 90 Degree Square Shoulder Indexable CNC 4 Flutes Face Mill Shoulder Milling Cutter with Wrench and Box

  • GREAT TOOL FOR CNC MILLING MACHINE--This BAP400R-50-22-4T Square Shoulder Face Mill Cutter is designed for CNC milling machine.
  • HIGH GRADE ALLOY STEEL MATERIAL--This Square Shoulder Indexable Face Milling Cutter is made of high quality alloy steel, which is featured with high hardness and good durability to ensure a long term service.
  • GREAT REPLACEMENT TOOL FOR YOU--This Face Shoulder Milling Cutter is regarded as an essential mill parts for milling machine, and it is very convenient to use it to replace the broken one or the old one.
  • USEFUL BOX FOR CONVENIENT STORAGE AND PROTECTION--There comes with a plastic box for easy storage and carriage, and it can provide good protection for the tool as well.
Check Stock

Twotrees CNC Controller Kit with Nema 23 Stepper Motor,TB6600 Stepper Motor Driver,GRBL CNC Shield Board,Switch Endstop-6.35mm

  • Newest CNC Shield Expansion Board V3.0 ---CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for....
  • More Compatibility Possibilities---It's a DIY kit with tons of possibilities. This complete CNC kit is GRBL compatible and has all the essential....
  • Premium Quality --- Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of....
  • Professional 3D Printer CNC Kit --- This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great....
  • Package Included:---1* CNC V3 ,1* Control Board , 4* TB6600 , 4* Limited Switches ,4* 23HS5628 Motor with 30cm wire (8mm/6.35mm Shaft....
Check Stock

3-Axis 32-bit ARM Based CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling,Support 500W Spindle/NEMA23 Stepper Motor/Laser (A4988+Fan)

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software:LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

FIRMERST 14 AWG Extension Cord 1875W 15A Heavy Duty Grounded 6 Feet, Pack of 2, White

  • 【 Safety】2 Pack of 6 Feet White extension cord, 3x14 AWG, 15 Amp 125 Volt, 1875 Watt, 125 Volt.
  • 【HEAVY DUTY】14 AWG cords, with thicker wire diameter, are capable of handling more power(1875W) with less resistance compared with the thinner 16 AWG ones(1625W).
  • 【FLEXIBLE & EASY TO BEND】Even if the cord is more thick than 16 AWG, it's still soft, flexible and easy to fold. It allows for coiling or straightening out and it is also convenient to store when not in use..
  • 【WIDELY USE】Ideal for household appliances, microwave, phone charger, light, toaster, laptop, hair dryer, etc.
  • 【WARNING】Indoor use only / Not waterproof / Check the wattage and ampere limit before use.
Check Stock

Comgrow 2 in 1 ROBO CNC 3018 5000MW Laser Engraving Module Compressed Spot,GRBL Control 3 Axis CNC Router Machine Kit with Offline Controller,End Mill Bits,for Wood Glass Mirror Stainless Steel

  • 【PRE-ASSEMBLED】Comgrow ROBO CNC 5W Laser Engraving for wood stainless steel stone glass ceramics is very easy to assemble and use. JUST DO THE UNBOXING AND LOCK 6 SCREWS when receive it, then, step on your creating journey..
  • 【ULTRA-FINE COMPRESSION LASER】The laser power for this CNC laser and router machine is 5W, the high-power engraving speed is faster, and the accuracy is higher. The ultra-fine laser focus area is reduced to 0.08mm^2. The high-density laser can easily cut 4mm thick wood and black. Acrylic.
  • can directly engrave smooth stainless steel metal and ceramics..
  • 【AUTOMATIC TOOL-SETTING】Comgrow ROBO CNC router pre assembled machine can calibrate the zero of the Z axis autonomously, with the functioning of embedded sensors.
  • 【OFFLINE CONTROLLER】The Comgrow ROBO CNC router Laser machine can work without pc. ROBO supports operating without PC, THE CNC ROUTER IS EQUIPPED WITH A OFFLINE MODULE. Just transfer files to a SD card, you may begin creating and no PC needed..
  • 【COMPREHENSIVE AFTER-SALE SERVICE】 Comgrow ROBO CNC Engraving machine for metal stone wood glass Stainless Steel offer exhaustive after-sale service, you can search "Comgrow" through Facebook, Youtube, Twitter, Instagram and google and will easily find out our Comgr....
Check Stock

Zhong Hua Jiang Spindle Motor Air Cooled Spindle 110V 2.2KW 2200W 4 Bearings 24000RPM 400HZ CNC Motor for CNC Router milling Machines Factory Direct Sales

  • 【TECHNICAL PARAMETERS】-3HP, 2 Poles, Collet ER20(compatible with bits between 1/25" and 1/2" ),Diameter: Φ80mm,Voltage: 110V ,Power: 2.2 KW,....
  • 【ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • 【EASY AND FAST TO INSTALL 】-We offer pre-soldered wire with aviation connector, it will take just 3 minutes to connect spindle motor to VFD..
  • 【APPLICATION】:Wood/ PVC/PCB/PMMA/Plastic/Aluminum carving/engraving machine, advertisement engraving machine,CNC router machine, small sized....
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied....
Check Stock

Comgrow ROBO Table CNC Router Machine with GRBL Offline Control,3-Axis Engraving Milling Machine 300x180x45mm Working Area for Carving Cutting Plastic Acrylic PCB PVC Wood Aluminum brass

  • 【Upgrade Comgrow CNC ROBO 】Comgrow cnc router 3 Axis 42 stepper motor are X/Y/Z Axis power, the axis moves more smoothly. 775 spindle motor up to 10000r/min. and comes with short circuit protection, no need to worry about module damage..
  • 【CUSTOMISED SETTINGS】Metal CNC machine cutter Full Aluminum Alloy tray Working area: 30x18x4.5CM. Meets most of the engraving needs.
  • 【AUTOMATIC TOOL-SETTING】CNC Router for metal aluminum copper can calibrate the zero of the Z axis autonomously, with the functioning of embedded sensors During the engraving process, there is no need to manually adjust the height of the Z axis to make the drill touch the surface of the engraved object.
  • 【 a wide range of projects and materials】the comgrow cnc router machine Capable of cutting and engraving all types of plastics, soft aluminum, Copper, woods, acrylics, PVCs, PCBs and MDF, the setting parameters of different materials can refer to the product page below middle"".
  • 【more Simply Assemble and Use】This table cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and SD Card of all the files. Please let us know if you need any help ..
Check Stock

ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software:LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock