Best Cnc Wood Engraving

CNC Spoilboard Surfacing Router Bit, 1/4\ Shank 1-1/2\ Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4".
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

RATTMMOTOR 2.2KW CNC Air Cooled Spindle Motor ER20 80mm Spindle 220V High Speed 24000RPM 3HP 400HZ for CNC Router Engraver Milling Cutting Machine

  • The 2.2KW air-cooled spindle motor's 220V, 8.5A, 400HZ frequency, less than 0.05mm runout off, 0-24000RMP speed..
  • It should be noted that the spindle speed must be kept above 9000 rpm, otherwise the spindle will be damaged..
  • It is mainly suitable for non-metallic engraving,such as wood carving/engraving machine, advertisement engraving machine,CNC machine..
  • This spindle is designed with a dustproof and waterproof cover, the body is made of stainless steel, and the rear is equipped with a cooling fan,....
  • It contains 4 bearings, high-precision grinding taper hole, high-precision, low noise..
Check Stock

SainSmart Genmitsu 10Pcs Nano Blue Coat Engraving Bits, 30 Degree 0.1mm Tip 1/8' Shank Conical V-Bit

  • ➤ V-Shaped Design: With a sharper cutting edge, that can help you do neat cuts..
  • ➤ Made of Alloy Steel: With super hardness, wear, break and corrosion resistant. This durable CNC bit with a long lifespan which can help you work efficiently..
  • ➤ Advantage: The mirror grinding processing for cutting edge leads to a perfect surface finish and reducing chance of glitch and deviation..
  • ➤ Ultimate Experience: Ultra-fine CNC engraving bits can help you get your projects and work done well..
  • ➤ Application: It is mainly used for acrylics, plastics, carbon fiber, chipboard, MDF, PCB, solid surface, wood. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
Check Stock

LotFancy Plywood Sheets for Crafts, 14pc Blank Unfinished Basswood Sheets, Thin Rectangle Wood Board Cutouts Pieces, 2 Sizes - 12Pc 150x100mm (6x4in), 2Pc 300x200mm (12x8in)

  • 2 SHEET SIZES: You get 12pcs 6 x 4” sheets, 2pcs 12 x 8” sheets.
  • MULTI-PURPOSE: Unfinished DIY wood pieces can be used to make a variety of hobby crafts - plane models, architectural house models, sculptures, sail boats, pagoda bridges, toys, film props, science and military models for parties, DIY craft projects, home decoration, birdhouses, ornaments, and more.
  • UNFINISHED BLANK WOOD PANELS: Our wooden boards are unfinished, natural wood color, smooth and have a polished surface.
  • Each sheet can be easily painted, colored, stained, carved and glued. Ideal for modelling, laser wood engraving, wood burning, pyrography, fretwork, CNC router and laser projects.
  • PREMIUM MATERIAL: Our hobby wood sheets are made of lightweight basswood plywood with a uniform grain and smooth surface texture.
  • Extended durability, rigidity, and stability for all your woodworking, crafting needs.
  • NOTE: We suggest you use professional tools for cutting or engraving. The use of dull or improper tools can lead to rough, splintery edges.
Check Stock

iPhone 12 mini Cool Fathers Day Wood Carving Grandpa Phone Case

  • ...) bumper. It is beautiful with great protective performance. The natural wood marks its uniqueness, which allows the uniqueness of the wood grain on each and every product. Therefore, only if you receive the product, can you appreciate its unique and natural beauty..
  • [Art engraving] Thanks to the application of laser engraving machine with high power and technology of our laboratory, some classic paintings, and personalized designs can be engraved on the wooden panel of our protective case. This is not a simple printing technology, the patterns are carefully engraved and finally etched out vividly in the method of laser engraving. We hope the visual feast on the wooden case can make you comfortable at any time..
  • [Reliability and hand feeling] The edge chamfer angle of the piece wood is determined based on the ergonomic data. All piece woods will be secondary manual polished after CNC cutting to ensure the comfortable hand feeling. If you choose a product with engraved patterns, the three-dimensional etching pattern on it will increase the friction coefficient, making it more reliable for holding, and less likely to fall in daily use..
Check Stock

Galaxy S20+ Cool Fathers Day Wood Carving Grandpa Phone Case

  • ...) bumper. It is beautiful with great protective performance. The natural wood marks its uniqueness, which allows the uniqueness of the wood grain on each and every product. Therefore, only if you receive the product, can you appreciate its unique and natural beauty..
  • [Art engraving] Thanks to the application of laser engraving machine with high power and technology of our laboratory, some classic paintings, and personalized designs can be engraved on the wooden panel of our protective case. This is not a simple printing technology, the patterns are carefully engraved and finally etched out vividly in the method of laser engraving. We hope the visual feast on the wooden case can make you comfortable at any time..
  • [Reliability and hand feeling] The edge chamfer angle of the piece wood is determined based on the ergonomic data. All piece woods will be secondary manual polished after CNC cutting to ensure the comfortable hand feeling. If you choose a product with engraved patterns, the three-dimensional etching pattern on it will increase the friction coefficient, making it more reliable for holding, and less likely to fall in daily use..
Check Stock

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

Premium Baltic Birch Plywood,3 mm 1/8

  • Materials: Premium Quality Baltic Birch form Siberia. Those unfinished plywood are suitable to carve into for woodblock printing..
  • B-BB Grade: One face will not have splices or patches,the plywood had a good surface to use for scroll sawing projects.It's surfaces also provide holding power of glue and screws..
  • Valued for its appealing light color,a uniform grain,smooth texture and durable..
  • Size:3mm 1/8"x 12"x 18"(Package of 6 * Size tolerance range 0.19mm).
  • Perfect for arts and crafts, school projects and DIY projects, drawing, painting, wood burning, wood engraving and CNC laser cutting projects..
Check Stock

SpeTool CNC Router Bits Carving Set for Wood Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

  • The Carving router bit sets of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
  • For CNC,Engraving machine woodworking, Carving soft and hard wood, plywood, MDF, stainless steel, titanium alloy etc.
  • Long service life, Decreasing the times of changing cutters,Saving production time.
  • Include 2*carbide end mills ( 1 pc v-groove end mill, 1pcs tapered end mill ), 2*Spiral router bit (1 pc up cut, 1 pc down cut).
  • The Carbide End Mill Suit for CNC Router, xcarve and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
Check Stock

Huanyang Water Cooled VFD Spindle Milling Motor 110V 1.5KW 24000RPM 400hz Φ80mm ER11 Collet for Wood Carving

  • The item is Water Cooled 110V-1.5KW 3 bearings Φ80mm spindle motor.(come with a 6mm collet).
  • NOTE:Need to be equipped with 110v 400hz variable frequency drive to use.Rated frequency of spindle is 400 Hz,If you input 220v voltage at 50hz or 60hz, it will damage the spindle..
  • stable performance,high precision bearing.
  • Application:wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc..
Check Stock