Best Co rotating Screw Extruders China

LuckyHigh Mixed Gas Co2 Draft Beer Dispensing Regulator with Dual Gauge, High Pressure Double Gauge CGA-320 Beer Kegerator Regulator, 0-60 psi Output Pressure, 0-2000 psi Tank Pressure

  • There are dual gauges CO2 kegerator regulator, 0-2000 psi and 0-60 psi precision measurement..
  • Dual knobs available to adjust pressure and instantly shut off. Easy to use, no screw driver required..
  • CO2 kegerator regulator 2 Durable tank washer for tight seal. Please place a washer between the lock-down nut and the tank to ensure a tight seal..
  • Integrated 5/16" barb outlet with check valve and 1/4" NPT threaded (ID) to prevent backflow.
  • This CO2 regulator compatible with standard CO2 tanks with CGA-320 valve.
Check Stock

CO2 Inflator Kit with 4 x16g CO2 Cartridges - Presta & Schrader Valve Compatible - CO2 Bike Pump for Road and Mountain Bikes

  • ...ires】: 16 gram cartridge inflates a road tire to 100 psi and a MTB tire to approx. 40psi. NOTE: CO2 gas is ‘not’ food grade. As this cartridge dispenses its air, it rapidly cools and becomes COLD to the touch.
  • care should be taken, protect your hands when dispensing air. IMPORTANT: For safety reasons - do NOT screw in and store a CO2 cartridge into an inflator head until needed for operation. Care & respect should be taken when using CO2 gas.
  • 【WARNING】: Never store the cartridges in or near any hot place, such as under direct sunshine, near a heat source or left in a car. Never use low quality CO2 head. Make sure the device has fully punctured the head of the cartridge. If not, or you find that the gas being released very slowly or the gas is freezing the head, discharge the gas for a few minutes until the bottle is fully empty, then dispose of properly..
Check Stock

Stetson Women's 214 Dark Wash City Trousers Blue 0 L

  • PERFECT FOR SMALLER RIFLE CARTRIDGES: The long handle that comes standard on our exclusive Co-Ax single stage press delivers more leverage than necessary for several small rifle cartridges. At half the length of the standard handle, the Forster Short Handle retrofits on your Forster Co-Ax press, to provide the perfect amount of leverage for small rifle cartridges..
  • EASY TO GRIP: The Forster Short Handle is complete with a comfortable 2" ball fitting on the end that makes it easier to grip..
  • STEEL SHAFT: The steel shaft makes for a durable and stiff handle that can withstand repetitive use..
  • EASY MOUNT HANDLE: It easily mounts in the Co-Ax Press with a single set screw..
  • LENGTH: The Forster short handle measures 4" long, the perfect length for short rifle cartridges and most handgun calibers..
Check Stock

Kelly Coffey-Meyer's 30-Minutes to Fitness Step Boxing

  • PERFECT FOR SMALLER RIFLE CARTRIDGES: The long handle that comes standard on our exclusive Co-Ax single stage press delivers more leverage than necessary for several small rifle cartridges. At half the length of the standard handle, the Forster Short Handle retrofits on your Forster Co-Ax press, to provide the perfect amount of leverage for small rifle cartridges..
  • EASY TO GRIP: The Forster Short Handle is complete with a comfortable 2" ball fitting on the end that makes it easier to grip..
  • STEEL SHAFT: The steel shaft makes for a durable and stiff handle that can withstand repetitive use..
  • EASY MOUNT HANDLE: It easily mounts in the Co-Ax Press with a single set screw..
  • LENGTH: The Forster short handle measures 4" long, the perfect length for short rifle cartridges and most handgun calibers..
Check Stock

Quick CO2 Adapter for Soda Water Compatible with DUO/Terra/Art Sparkling Water Maker Connecting Original blue CO2 Cylinder with TR21-4 Male Thread Soda Maker Valve Refill Accessories

  • ...apter is specially designed for Original blue CO2 Cylinder with TR21-4 Male Thread, Other cylinders with TR21-4 Male Thread from other brands may not match this adapter well.Therefore, please make sure that blue CO2 Cylinder is original, including the Valve before purchasing, Otherwise the Quick CO2 Adapter may not screw down far enough to work in the new soda maker.
  • Simple Installation: In just a few simple steps, your CO2 soda maker can be used with this quick adapter. Please check the detailed installation steps on our details page.
  • High Quality Material: The co2 adapter is made of high quality brass, anti-corrosion, durable and safe, with polished surface, good sealing, high quality, anti-oxidation, anti-rust.
  • Perfect After-sales Service: we provide high quality after-sales services. If the product does not meet your requirements, it can be replaced, so you can rest assured of your purchase. If there is any problem, please contact us in time.
Check Stock

VEVOR Beer Mini Keg 135 Oz Mini Keg Growler w/Tap Faucet Pressurized Growler 304 Stainless Steel Pressurized Beer Growler with Co2 Pressure Regulator Beer Dispenser Portable Carbonated Growler

  • Heavy-duty Stainless Steel Material: Each part of the draft beer dispenser is made of food-grade 304 stainless steel, to keep the beer clean and....
  • Large Volume Capacity With Compact Body: The growler keg is Φ5.3"x14.2" (Φ135x360 mm) in dimensions, light and small, yet it can hold 135 Oz (4L)....
  • Comes With Pressure Regulator: Monitor the pressurized beer growler's current PSI from the regulator gauge, and fine-tune pressure by rotating the....
  • Upgraded Faucet For Easy Pouring: The easy-to-operate dispensing tap faucet makes it convenient to pour beer. You just need to screw the CO2....
  • Multifunctional Mini Beer Keg: The dispensing tap faucet can be replaced with a matching threaded cap, to turn the pressurized growler into beverage....
Check Stock

Stuhrling Original Mens Automatic Depthmaster Heritage Dive Watch with Rubber Strap (Red)

  • Embark on a new journey with the Heritage Diver. A rotating bezel and luminous hands will stand out amongst a sea of underwhelming timepieces. And Automatic Movement ensures you're on time, every time..
  • Make the most of your time with the Heritage Diver's automatic movement..
  • A rotating copper tone bezel, screw down crown and luminous hands will set you apart from the crowd..
Check Stock

The Hillman Group 47675 8-Inch x 3-Inch All Purpose Wood Screw with Phillips Drive, 1-Pound , Yellow

Check Stock

CXWXC 16g Threaded CO2 Cartridges for Bike Tires - Cartridge for CO2 Inflator with Threaded Connection, CO2 Pump for Road and Mountain Bikes (D: 12 Pack)

  • ...ires】: 16 gram cartridge inflates a road tire to 100 psi and a MTB tire to approx. 40psi. NOTE: CO2 gas is ‘not’ food grade. As this cartridge dispenses its air, it rapidly cools and becomes COLD to the touch.
  • care should be taken, protect your hands when dispensing air. IMPORTANT: For safety reasons - do NOT screw in and store a CO2 cartridge into an inflator head until needed for operation. Care & respect should be taken when using CO2 gas.
  • 【WARNING】: Never store the cartridges in or near any hot place, such as under direct sunshine, near a heat source or left in a car. Never use low quality CO2 head. Make sure the device has fully punctured the head of the cartridge. If not, or you find that the gas being released very slowly or the gas is freezing the head, discharge the gas for a few minutes until the bottle is fully empty, then dispose of properly..
Check Stock

Relevant Play Mad Mattr Master Builder Mini Extruder Box Set

  • Mad mattr holds its shape, easy to mold, never dries out.
  • Includes 6 mini extruders, safe cutting tool, 2 Bounce pouches of Mad mattr in pink and blue.
  • Extruder shapes include Octagon, triangle, Star, circle, square, house.
Check Stock