✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. Output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.17*0.25mm, The engraving machine speed can be as high as 5000 mm/min. The laser cutter can cleanly cut 6mm pine board in one pass. The laser cutter comes with an air assist nozzle, use with our air pump could support a higher speed and cut better..
✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly prote....
ATOMSTACK Laser Engraver S10 Pro 10W Output Power 0.08 * 0.06mm Compressed Spot Engraving Cutting Machine Eye Protection Fixed-focus Air Assist Kits DIY CNC Machine for Engraving and Cutting
Dual Compression Spot Technology: ATOMSTACK S10 Pro laser engraver with 50W machine power and 10W laser output power, ultra-fine laser focus area is....
Support Offline Engraving: S10 PRO laser engraving machine configures the terminal control panel, supports offline engraving and with emergency stop....
High-Performance Fixed-Focus Laser: No need to adjust the focus before engraving.
The focal spot area of the new laser is only 1/3 of the spot area of....
New Filter Panoramic Glass Eye Protection Design: S10 laser engraving with newest panoramic filter glass protective cover plays a very good role in....
Compatible With: Newest ATOMSTACK S10 Pro engraving machine compatible with various mature engraving software, such as LaserGRBL(Free), LightBurn(may....
ENJOYWOOD CEL-E10 Laser Engraver, 50W Laser Engraving Cutting Machine,10-15W Laser Output Power Laser Engraving Machine,0.06 * 0.06mm Double Compressed Spot Laser Engraver for Wood and Metal Etc
...y: laser engraver laser power is 10-15W, ultra fine compressed laser spot is reduced to 0.06*0.06mm, Other 10W Machine laser focus area is 0.06*0.08mm. The smaller the laser spot, the greater the energy of the laser. Laser could control laser beam more accurately to 0.01mm. Cutting and engrving more precision..
Fast Engraving and Cutting: The laser engraving machine burning Temperature is up to 1200℃. Engraving & cutting speed is 300% higher than that of ordinary models.Engraving speed up to 11,000mm/min.ENJOYWOOD laser engraver with 50mm focal length, Cutting depth increased by more than 20%,Other 10W Machine With 30mm focal length..
Vivid Colors Engraving: Power 10-15W optical power can oxidize the metal surface. Oxidized metals exhibit rich colors.By controlling the speed, power and line spacing you can have color laser engraving..
The New Filter Panoramic Glass Eye Protection Design: Plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles, you can also watch laser engraving. The emergency stop button and reset switch are more convenient and safe to use.Wide Compatibility: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, support macbook system (LightBurn)..
SCULPFUN S6 Pro Laser Engraver, 60W Laser Engraving Cutting Machine, 5.5-6W Optical Power Laser Cutter for Metal and Wood, Logo Carving Marking Machine, Gifts for Him (S6 Pro Engraver)
▶【Fast Focusing and Sturdy Structure】- With fixed focus lens and sliding design, you only need to slide the laser and tighten the screw to complete fast focusing of the laser cutter machine. The X and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects..
▶【Eye Protection Designs】- The laser filter cover of the metal engraving machine filters 98% of the uv light, allows you to watch the engraving without wearing goggles and prevents your pet from grabing the laser spot. There is a power switch on the machine for emergency power off. The A4 size steel pad can well protect your table from laser damage..
▶【Easy and Fast to Assemble】- The all-metal structure design makes the desktop laser etching machine more solid, steady and durable. There are reserved fixing holes on the the four feet and the body for fixing the machine and the data cable. It is easy to assemble, usually only takes 10-20 minutes to finish installation and setup..
▶【Widely Compatibility】- The S6 Pro laser engraving machine works well with various engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows/MACs system, engr....
ATOMSTACK A20 PRO Laser Engraver, 130W Laser Engraving Cutting Machine with Air Assist Kits, 20W Output Power 0.08 * 0.1mm Compressed Spot, Laser Cutter and Engraver Machine for Metal Steel
...ting machine is the world's first 20W optical power diode laser engraver. With the latest generation of four 6W laser coupling technology, it can cut off 15-20mm thick tungsten board as well as the 8-15mm thick black acrylic board with only ONE PASS, and even cut the 0.05mm thick stainless steel sheet..
MORE PRECISE ENGRAVING: Atomstack laser cutting & engraving machine with a 32-bit motherboard works more smoothly and stable. The advanced built-in 256-bit color scale with 0.08 * 0.1mm laser spot area makes the engraved pattern more contrast and more obvious. The finished pattern is like sketching on paper. the effect is more delicate and natural in the overlay of black and white..
SMARTER ENGRAVING & CUTTING: The ATOMSTACK APP is connected to the A20 pro laser cutting machine and supports both Android and Apple phone systems. Also, it is equipped with a controller and an emergency stop button so that you can engrave completely offline. You can engrave smoothly and safely even when there is no network environment or computer..
CLEANER ENGRAVING & CUTTING: The A20 PRO laser cutter and engraver machine is equipped with an upgraded air assist kit, which have dual built-in air-assist pumps. It makes it twice as efficient as other air assist units. The air a....
WIZMAKER L1 Laser Engraver, 20W Output Power Laser Cutter, High Accuracy Laser Engraving Machine, 120W Laser Cutting Machine with Air Assist, Lazer Engraver for Wood and Metal, Acrylic, Leather
【Faster Speed & High Accuracy】 Upgraded 20-24W Laser module and 32 bit motherboard support faster cutting and engraving speed. Ultra-fine laser focus is reduced to 0.06 x 0.06mm, provide you a higher accuracy engraving artwork. WIZMAKER laser engraver can cut 10-12mm paulownia wood and 8-10mm acrylic in one pass, and up to 20mm wood, 15mm acrylic, 0.05mm metal steel. Also can directly engrave metal, ceramics, glass, the engraving and cutting speed is 40% higher than the ordinary model..
【Solid & Easy to Install】 The sturdy and easy installation all-aluminum alloy anodized structure, and all-metal wheel, shaft, and enclosed synchronous belt makes the laser module still ensure motion stability under high-speed up to 400mm/s, improves the accuracy of engraving. And the entire structure of laser cutter has been designed for quick assembly, and the assembly can generally be completed within 10-25 minutes..
【Safe & Longer Service Life】 The red emergency button on the laser engraving machine allows you to stop the operation at any unexpected situations. The laser eye shield on laser module can effectively filter 97% of UV rays, effectively protectin....
Powerful Compressed Laser Spot: The Befon Upgraded 40W laser engraving machine adopts spot compression technology, which makes the light source more concentrated. The normal laser spot is 0.3mm x 0.5mm and the compressed point with us is 0.16mm x 0.19mm. Compared to conventional engraving machines, The high-density laser can easily cut 6mm thick wood and black acrylic.
it can directly engrave smooth stainless steel metal and ceramics..
New Eye Protection Design: Adopts newly laser protective cover perfectly protect your eyes, a filter UV light for 98%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles..
Upgraded High-Performance Fixed-Focus Laser: No need to adjust the focus before engraving.
the new laser focal spot is 50% smaller than other ordinary lasers, new laser combines precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser. The new knob design allows you to adjust the distance without the aid of tools. It is more convenient and quick.
Wide Compatibility: The Befon Upgraded 40W laser machine can be compatible with various mature engraving software, such as LaserGRBL....
SCULPFUN S30 Pro Laser Engraver with Auto-Controlled Air Assist System, 84W Laser Engraving Cutting Machine, 10W Optical Power Laser Cutter for Home Family DIY, Ultra-Thin Carving (S30 Pro Engraver)
▶【Automatically Controlled Air Assist System】 - The traditional air assist kits cannot be controlled during engraving, and the engraved pattern will be smoked into a fuzzy fog. The S30 Pro is equipped with an air assist 32-bit motherboard and a control-type air pump, which can intelligently control the air-assist switch during engraving through the LightBurn software M8 button, this makes the engraving and cutting very clean, and makes the finished works more high-quality..
▶【Built-in High Pressure Air Assist Nozzle】 - S30 Pro laser cutting machine is equipped with advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assistance. The powerful airflow blows away the residue, making the cut surface very clean and smoothy..
▶【High Precision Ultra-thin Linear Rail Engraving】 - S30 Pro laser engraver adopts ultra-thin laser shaping technology, the laser focus is as thin as hair, very powerful for engraving. Besides, the carving machine adopts the most accurate 0.005mm industrial linear guide, which greatly improves the engraving accuracy, and there is no wave line when e....
ORTUR Laser Master 2 Pro S2-lu2-2, 24V Laser Engraver, Laser Engraving Cutting Machine, DIY Laser Marking for Metal, Compresed Spot CNC, 32-bit Motherboard LaserGRBL,Engraving Area 400×400mm
✅[Ortur new upgrade pro model] Laser Master 2 Pro S2 LU2-2 is newly upgraded, adding new functions such as flame detection, emergency stop, etc., with stronger system reliability, smooth engraving, faster engraving speed, higher accuracy, and more refined engraving products. The new upgrade brings users a better experience!.
✅[Overall optimization] Laser Master 2 Pro S2 LU2-2 has a longer service life, because the mechanical structure has been optimized and designed to have a faster speed and can work stably for a long time. At the same time, Ortur Laser Master 2 Pro can provide users with more security because it has more security features..
✅[Accessories system update] 1. Because it is equipped with the latest OLM-PRO-V10 motherboard, the engraving is smoother and more delicate, the engraving accuracy is higher, and the speed is faster. 2. The circuit system with 24V voltage is upgraded, the current is lower, and the system is safer. 3. Update Ortur Laser 1.8 firmware, which is the most advanced laser engraving machine firmware at present, with more powerful functions. 4. Support Ortur offline control screen..
✅[Product advantage] Ortur Laser 1.8 firmware is based on OLF1.4 firmware upgrade, optimizes the motion algorithm, and increases t....
ORTUR 24V Laser Engraver 2 Pro-S2-SF, Laser Cutter 5.5W Output Power Laser Machine Eye Protection, Laser Master with 400x400mm, 10000mm/min Laser Engraving Machine for Metal and Wood
✅[Ortur new upgrade pro model] Laser Master 2 Pro S2 SF is newly upgraded, adding new functions such as flame detection, emergency stop, etc., with stronger system reliability, smooth engraving, faster engraving speed, higher accuracy, and more refined engraving products. The new upgrade brings users a better experience!.
✅[Overall optimization] Laser Master 2 Pro S2 SF has a longer service life, because the mechanical structure has been optimized and designed to have a faster speed and can work stably for a long time. At the same time, Ortur Laser Master 2 Pro can provide users with more security because it has more security features..
✅[Accessories system update] 1. Because it is equipped with the latest OLM-PRO-V10 motherboard, the engraving is smoother and more delicate, the engraving accuracy is higher, and the speed is faster. 2. The circuit system with 24V voltage is upgraded, the current is lower, and the system is safer. 3. Update Ortur Laser 1.8 firmware, which is the most advanced laser engraving machine firmware at present, with more powerful functions. 4. Support Ortur offline control screen..
✅[Product advantage] Ortur Laser 1.8 firmware is based on OLF1.5 firmware upgrade, optimizes the motion algorithm, and increases the max....
