Best Cog Lcd Module

DC DC Buck Boost Converter Variable Voltage Regulator CC CV 0.5-30V 4A 5V 6V 12V 24V Power Module Adjustable Voltage Regulated Laboratory Power Supply

  • output voltage range is DC 0.5-30V, can be arbitrary adjustable.
  • output current can be 3A for long term use, if enhance heat dissipation, it can reach 4A.
  • max output power is 35W, if enhance dissipation, it can reach 50W.
  • LCD displays input/output voltage, output current/output power/output capacity/output time.The module can be set to ON/OFF by default.
  • Safe Protection: the module is with Anti-reverse connection protection of input end, so that it will not burn out when there is reverse connection.Anti-backflow protection at the output end. No need to add anti-backflow diode when charging. Multiple software protection mechanisms are available, and the protection threshold is adjustable. When the working parameters of the module exceed the protection threshold, the output will be automatically turned off.
  • Application: the volt conversion board can be used as an ordinary buck/Boost module with over-current protection.
  • used as a high-power LED constant current driver module.
  • DIY a solar power controller, Battery Charging.
  • Output ripple is small and Ď€filter is available.Thick heat sink .Buck-boost Integrated.
Check Stock

SRAM PG950 9-Speed Cassette (11-28T)

  • Cassette Body Type: Shimano 9/10/SRAM, Cassette Cogs: 11,12,13,15,17,19,21,24,28, Cassette Color: Chrome, Cassette/Cog Color: Silver.
  • Cassette/Cog Range: 11-28t, Chain Compatibility: 9-Speed, Cogs: 11,12,13,14,16,18,21,24,28.
  • Drivetrain Spacing: Shimano/SRAM 9, Speeds: 9sp, Weight: 250 gram, Weight: 370 gram.
Check Stock

DEVMO DP20V2A Constant Voltage Constant Current Programmable Control Step-Down Supply Power Module

  • The constant voltage and constant current programmable control power supply module is cabinet and delicate, and it put the collection of analog integration and digital control functions in one..
  • Its adjustable output voltage range is 0-20.0V, step by 0.1V. Its adjustable output current range is 0-2.00A, step by 0.01A..
  • The constant voltage and constant current programmable control power supply module is cabinet and delicate, and it put the collection of analog integration and digital control functions in one. Its adjustable output voltage range is 0-20.0V, step by 0.1V. Its adjustable output current range is 0-2.00A, step by 0.01A. Boot voltages can be stored freely and the model has two groups of quick storage voltage. Compared with the traditional analog power supply, it is more convenient to quickly extrac.
  • Adjusting preset voltage:Pressing SET button, page down to U-SET, press the codding potentiometer, then enter toadjustnumeric value. Press codding potentiometer in turn to choose the numeric value you want to adjust. Turn codding potentiometer to adjust the numeric value. If you want toexit adjusting voltage, press shortly SET. In the process of adjusting preset voltage, if you open output voltage mode by pressing the ON/OFF, the output voltage wi....
Check Stock

QuickBooks: A Complete Tutorial for beginners to Learning QuickBooks Simple Concepts and Techniques

  • Free PDF tutorial(more than 22 lessons) and clear listing in a nice package.
  • The most economical kit based on Arduino platform to starting learning electronics for those beginners who are interested..
  • Lcd1602 module with pin header (not need to be soldered by yourself).
  • This is the upgraded starter kits with power supply module, 9V battery with dc.
  • High quality kit with UNO board, compatible with Arduino UNO R3, MEGA 2560 R3, NANO..
Check Stock

2004 204 20x4 Character LCD Display Module HD44780 Controller Blue Blacklight

  • Durable hard PCB board and metal, ideal for 1602 interface.
  • Welded by reflow soldering, no burrs, comfortable and safe.
  • Power supply IC and SD card slot, convenient to uses.
  • Transparent protective film covered on the display protect it from damage.
  • Suitable for beginners of LCD color display module,SCM learners and LCD enthusiasts.
Check Stock

12v to 5v Converter Buck Module USB Output Power Adapter Dc Power Adapter Converter Direct Current to Direct Current Regulator Car Power Converter (1)

  • Parameter: these usb buck module input voltage range DC 12V and output voltage default DC 5V, the maximum output current is 3A, no-load current is 10mA and the maximum output power will reach 15W.
  • USB and high conversion: this DC to DC converter module has USB charging ports, DC to DC buck converter has integrated switch thin regulator module, the conversion rate is as high as 96%.
  • Intelligent protection: this 12V to 5V DC converter is using intelligent microprocessing chip, over voltage, over current, over temperature and short circuit, it can be auto protection.
  • Wide application: DC converter module 12V to 5V is widely applied for GPS navigation, driving recorder, electronic dog, car radio, MP3, MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, LCD TV, LED, etc..
  • Warm prompt: the power of devices must be lower than 15W when using this DC to DC converter 12V to 5V, and not compatible with partial Samsung phones.
Check Stock

Gates 26G3628 G-Force Continuously Variable Transmission (CVT) Belt

  • Highest shock load rating to date being able to withstand the power of the 400hp machines.
  • Latest bottom cog design for greater rotational efficiency at full shift.
  • Aramid Fiber cord, versus polyester, wraps over bottom cogs for increased bottom cog strength.
Check Stock

ELEGOO Upgraded 37 in 1 Sensor Modules Kit with Tutorial Compatible with Arduino IDE UNO R3 MEGA Nano

  • Updated from the old version (others): Received great ideas from our customers and adopted in this upgraded kit..
  • Removed useless modules like light cup and mercury module, heartbeat sensor, two of the hall sensors, one of the dual-color sensor. Add useful modules like GY-521 accelerometer module, LCD1602 screen, DS1307 real time clock module etc..
  • Upgraded tutorial only for R3, MEGA R3, NANO in CD, listing paper, resistors pack only from Elegoo Team. There are tutorials in the CD that comes with. If you prefer download the tutorials online from the official website.
  • 100% compatible with Arduino official IDE, Raspberry Pi and STM32..
  • Note: To use Elegoo starter kits requires basic electronic knowledge. If the user has no experience, it would be better to have someone lead and teach them while studying..
Check Stock

Ultimax UHQ401 Belt (HQ for Arctic Cat 500 (02-09), Suzuki 500 Vinson (03-07))

  • Highest shock load rating to date being able to withstand the power of the 400hp machines.
  • Latest bottom cog design for greater rotational efficiency at full shift.
  • Aramid Fiber cord, versus polyester, wraps over bottom cogs for increased bottom cog strength.
Check Stock

Smraza Ultimate Starter Kit for Arduino R3 Project with Tutorial, 200pcs Components Compatible with Arduino (67 Items) with 9V 1A Power Supply

  • Smraza Electronics Fun Kit - It has all consumable component are offen used. Compatible with Arduino and Raspberry Pi, it can almost meet all your needs..
  • A Breadboard and Power Supply Module -Include a good range of LEDs, resistors, buttons, capacitors, a few transistors..
  • Lcd1602 module and sensor module, with jumper wire and Male-female dupont wire to meet your project expetation..
  • All parts components are in a sturdy and nice storage box which can help you keep the components neat after using. To keep the widget such as LED, IC, buttons, diodes, etc..
  • With Datasheet and Tutorial - We provide detailed instruction for you to begin your electronic projects, any questions, please contact our customer service..
Check Stock