Best Cold Pipe

HEATIT JHSF 120-feet 120V Self Regulating Pre-assembled Pipe Heating Cable

  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment..
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable..
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap..
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes..
Check Stock

Everflow Supplies PCBL3460 60\ Long Pre-Cut Black Steel Pipe with 3/4\ Nominal Size Diameter

  • PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.
Check Stock

PEX Pipe Plumbing For Beginners: Complete Guide To Plan, Design, Install And Maintain PEX Plumbing Systems

  • Directly from One of the Biggest Pex Systems Manufacturers.
  • NSF Certified Pex Pipe/Tubing 1/2" Blue and Red 100 ft x2 Rolls for Potable Water.
  • Pex Crimp Lead Free Brass Fitting 1/2" coupling, Elbow, Tee 5 PCS/each -15 PCS.
  • Pex Cinch Clamp Tool with 50 PCS Stainless Steel Cinch Clamps.
Check Stock

VEVOR Pipe Heating Cable, 24-feet 7W Heat Tape for Pipes with Built-in Thermostat, Protects PVC Hose, Metal and Plastic Pipe from Freezing, 120V

  • ..., pumphouses, water tanks, outdoor hydrants, pipe valves, faucets, etc. Perfect for water-filled pipes such as PEX, PVC hose, and metal pipes..
  • UL Certified Approved: Our pipe heat cable has 7 W/ft and has rapid heating. It only needs 2 minutes, the temperature rises 70℉ and keeps your pipes protected from -100℉ cold temperatures! You will never have an issue when everyone else has frozen pipes! UL-approved heating cable with IP68 waterproof rate assures 5 years’ worth of use..
  • Premium Built-in Thermostat: Thanks to the built-in thermostat with an accuracy of ±1°, the heat tape for water pipes automatically turns on at 43℉/6℃ and stops working at 55℉/13℃. Compared with a heat-shrinking sleeve thermostat, our high-strength injection molding thermostat is much more secure to use..
  • Perfect 24 ft Length: The 24 ft heat cable for pipes has a 2 ft power cord, allowing it to work at long distances. The linear distance between your pipe and the valve is approximately equal to the heating line length. Put the heat tape on as a “protective suit” for your pipe. There is an indicator light on the grounded plug, and it will light when plugged in..
  • Convenient & Smooth Installation: The pre-assembled heat cable needs tiled installation. Do not cross....
Check Stock

Rustic State Industrial Plumbing Gooseneck Connector Iron Pipe Rust Free 3/4 Inch for DIY Projects Black Set of 10

  • PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.
Check Stock

M-D Building Products 50150 Pipe Insulation, Black

  • Stops condensation on cold pipes to prevent water damage.
  • Easy to install. Tube Pipe Insulation- 3/8 inch Wall - 3/4 inch x 6 feet.
Check Stock

Flex Tape Rubberized Waterproof Tape, 4\ x 5', Clear

  • Self-fusing Silicone Tape that does not melt up to 260°C (500°F) making it ideal for emergency repairs for automotive, plumbing, marine, hose, electrical, indoor and outdoor applications..
  • Silicone rubber has a tensile strength capacity of 900 PSI, giving it superior water and air tight sealing performance for high pressure pipe leakages..
  • Corrosion-proof and has high resistance to heat, harsh solvents, chemicals.
  • Meets UL 510 standards and ISO 9001 on Industrial Grade Sealing Application..
  • Flexible, Stretchable and conforms even to small pipe diameters, tight corners and cold environments up to -50°C (-60°F).
  • Insulates up to 600 volts/mil and dissipates heat generated well so as to resist melting, weathering and tearing..
Check Stock

Hose Y Mixer 3/4fitting

  • CP inlets are 1/2 inch male pipe thread or 1/2 inch sweat. For use in maximum 10 inch wall thickness. Inlets are 5"apart on center. Overall length of....
  • The freeze less Model 22 hot and cold faucet is designed and intended for year round hot or cold irrigation and cleaning purposes regardless of....
  • The Model 22 contains an integral back flow protection device and does not require an add on vacuum breaker.
Check Stock

Fitinhot Camp Wood Stove, Tent Wood Burning Stoves Portable with Chimney Pipes, Upgraded Titanium Surface Camping Stove, Heat Resistant Glass & Gloves for Outdoor (Black)

  • ...er 3pcs of the chimney pipe has length of 11.3", pipe dia.2.4".
  • 【★Adjustable Damper★】This camp stove has a front and chimney adjustable damper system to adjust the air flow and release smoke. Turn on the damper in the first section of the chimney pipe before ignition. Use 12" logs to keep your camp toasty in cold outdoor..
  • 【★Perfect Design★】Flat top of the stove for cooking, dual shelf on side of the stove suport for ingredients,and also can be used to dry gloves, socks and small wet items. 1.78meter (5.84feet)height adjustable chimney suitable for different types of tent. High-temperature resistance glass to offer fabulous burning view at night. Stainless steel removable pad at the bottom of the stove to improve combustion.
  • 【★Multifunction★】This Outdoor Wood Burning Stove is IDEAL FOR heating and cooking in small spaces such as canvas tents, teepees, yurts,paito, shacks,tiny homes and more. Once the fire starts it feels a little bit like home, create warm and comfortable atmosphere..
Check Stock

J-B Weld MufflerSeal Muffler Cement Plastic Tube 12 oz., Model Number: 37912

  • J-B Weld Muffler Seal: MufflerSeal is an iron reinforced paste designed to seal mufflers, pipe joints and exhaust systems. MufflerSeal can resists up to 700 F..
  • Cure Process: MufflerSeal can cure in two ways: By allowing the product to fully harden after it has been applied which can take up to 24 hours (time may vary based on cold or humid work environments) or MufflerSeal can be cured through heat application. You will be able to tell when the product is cured once it is hard..
  • Projects: Mufflers, Pipe Joints and Exhaust Systems..
Check Stock