Brady PSPT-375-175-WT TLS 2200 And TLS PC Link PermaSleeve 0.645\ Height, 1.765\ Width, B-342 Heat-Shrink Polyolefin White Color Wire Marker Sleeves (100 Per Roll)
3:1 heat shrinkable sleeve fit snugly around wires for maximum insulation protection and permanent identification.
Fade-resistant and smudge-proof for superior aesthetic appearance.
Cold resistant and flame-retardant with an operating temperature of -67°F to 275°F (-55°C to 135°C).
For use with BMP61 Label Printer, BMP71 Label Printer (with media adapter), BradyPrinter M611 Mobile Label Printer, TLS 2200 Thermal Labeling System, TLS-PC LINK Thermal Labeling System.
Cable Matters UL Listed 10-Pack RJ45 Keystone Jack in White
Cat 6 RJ45 Heavy duty keystone jacks fit patch panels, wall plates, or surface mount boxes with standard keystone blank openings.
Accepts 23 and 24 AWG unShielded twisted pair (UTP) cable.
10 Gigabit Ethernet cat 6 performance to Future proof your network.
Meets or exceeds Category 6 performance in compliance with the ANSI/TIA/EIA 568-C.2 standard.
UL listed keystone jack (E486099) with T568A and T568B color-coded labels.
Category 6 rated performance up to Gigabit Ethernet speeds for a fast and reliable network.
Supports T568A and T568B wiring with 110-style, color-coded termination blocks.
Dual IDC terminals accept 110 or Krone impact tools and provide cable strain relief.
Cost effective 10 pack of Category 6 KJ modules can terminate five cable runs.
Impact tool or tool-free 90 degree termination.
Heavy duty construction includes an impact-resistant and fire-retardant housing with gold-plated RJ45 contacts, dual IDC covers, and a snap-in retaining clip for a secure connection.
PVC Termination Cap Mesh Screen Vent Cover Furnace & Roof Vent Cap Stainless Steel Wire Round Exhaust Pipe Cover End 3 Inner & 3.5 Outer Diameter
ATTENTION: Please Read: the inner diameter measures 3" inch and the outer diameter measures 3.5" inch, therefore any pipe connected with mesh pipe....
PRODUCT PATENT: PVC drain screen cover with wire round mesh screen built in slot allows water condensation to drain out on the side of the PVC vent....
SIMPLE & COMPATIBLE: mesh screen vent cover is easy to install and no effort is required by inserting the termination vent cap inside the hub or....
TOUGH: the white stainless steel termination vent mesh screen cover is the best pipe cover for outdoor that won't corrode or rust preventing leaves,....
AIRFLOW: PVC pipe cover works as pipe screens with stainless steel mesh screen cap that allows maximum airflow for the furnace work through the mesh....
❉【High-quality POF Material】The shrink packaging bag is made of polyolefin. 100% high-quality POF material, transparent, safe, environmentally friendly, strong heat resistance, high ductility, and not easy to break..
❉【High Shrinkage Rate】The shrinkage rate of this plastic heat shrinkable bag is as high as 75%, which can meet the packaging and shrinkage requirements of various products, and has good welding performance..
❉【Good Toughness】This POF shrink bag is extremely cold-resistant and can still maintain good flexibility in an environment of -50°. It can ensure safe packaging of items and 100% safe to prevent scratches, folding and breakage..
❉【Easy to Use】You only need to put the items in the POF shrink bag, and then use a heat gun, heat tunnel or hair dryer to shrink and seal the bag evenly until it is completely enclosed. If there is no sealing machine, the heated curler can also be sealed..
❉【Application】POF heat-sealable shrink bags are very suitable for packaging stationery, photo frames,bath bubble bombs, oil bottles, gifts, candles, cosmetics, small wine bottles, small gifts, homemade DIY handmade products..
Glarks 125Pcs Marine Grade Heavy Duty Tinned Copper Wire Lugs Battery Cable Ends Eyelets SC Ring Terminal Connectors Assortment Kit
★『What You Get:』 In this set, we offer 8 types of SC cold end termination ring terminals total 125pcs for your work, they are sorted packed in a plastic box..
★『High Quality:』 All the SC ring terminals are made of 100% annealed electrolytic grade copper for maximum conductivity, with tinned surface for corrosion protection..
★『Reliable:』 Terminals with heavy duty construction improves high temperature durability and closed design seals out the moisture, ensure connection reliability.
high standard flared opening for easy wire insertion..
★『UL Approved:』 These marine grade SC ring terminals are UL Approved, comply with all relevant European standards. Wire can be crimped or soldered to copper lugs, more safe..
★『Application:』 These battery cable lugs are safe and reliable, great for distribution box, marine, golf carts, solar panels, home applications, etc..
328Pcs Heat Shrink Tube Shrinkage - It is 2:1 heat shrink ratio, and will shrink up to 1/2 of original, just use the mini heat gun heating for it 5 second..
High-quality heat gun: The hot air gun has two heat dissipation ports, and the service life can reach more than 5 years. 300W power is suitable for many DIY productions and can dissolve hot melt glue sticks and glue. Of course, it is definitely suitable for heat shrinkable tube..
Eight sizes high-quality heat shrink tubing for your choose, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. First turn on this mini hot air gun switch,then glue inside will soften and seal the connection..
[Product parameters] Heat gun :The length is 22 cm, which can produce high temperature of 200 degrees Celsius, and the US plug. Heat-shrink Tubing: 8 sizes, 5 colors, the sizes are 1mm, 2mm, 3mm, 4mm, 6mm, 8mm, 10mm, 14mm..
[Product warranty:] The heat gun can be used for five years. If it is broken under normal use, it will be replaced for free within five years. The heat shrinkable tube is RoHS compliant and free of formaldehyde. VETIN only produces safety products..
TENINYU Punch Down Impact Tool Kit with 110 Blade Type for Ethernet Punch Down Block Keystone Jack & Network Wire Cable Repair
Punch Down Tool 110 Blade: Spring-loaded for fast and low effort cable seating and termination, connecting 110 patch panel, blocks and keystone jacks.
Dual Function Blade: Reversible Cut/Punch function for cutting wire or pushing into IDC terminal. Swap the blade from the cut side using the twist and lock collar socket.
The blade is removable and can be stored inside the body of the tool for transport & safety.
Adjustable Impact Force: The Low/High impact adjustment dial adjusts the force of the spring-action to meet various cable termination applications.
Ergonomic Design: Provides a comfortable stable grip with impact-resistant housing and reduces hand fatigue.
Compact and light, easily fit in a toolkit or tool belt.
Keystone Jack Compatibility: Made to terminate and cut Cat3, Cat5, Cat5e, Cat6, and Cat6A network cable & voice cable.
Good non insulated butt connectors: Made by high quality red copper, has good electrical conductivity. with tin plated on the surface, better anti-oxidation and corrosion resistance performance..
High Performance Wire Ferrule Cable Crimp Terminal : These butt connectors easy to connect with electrical wire, Wire stop structure is nice to insertion wire in right space, and make sure the effect of compression..
Easy to use: Make the wire connection easier and stronger, no matter whether you use it in home circuits, car repairs, motorcycle repairs, etc., making the work easier and more efficient..
45pcs heat-shrinkable tubes: this connector kit has three sizes of connectors with 45pcs heat-shrinkable tubes..
Package Include: include 80pcs 22-18AWG, 60pcs 16-14AWG, 60pcs 12-10AWG total 200pcs Non-Insulated Butt Connectors packed in a plastic box, easy to store and carry..
Glarks 65Pcs Assorted Heavy Duty Wire Lugs Battery Cable Tinned Copper Eyelets Tubular SC Ring Terminals Connectors with Spy Hole Assortment Kit
★『What You Get:』 In this set, we offer 9 types of SC cold end termination ring terminals total 65pcs for your work, they are sorted packed in a plastic box..
★『High Quality:』 All the SC ring terminals are made of 100% annealed electrolytic grade copper for maximum conductivity, with tinned surface for corrosion protection..
★『Reliable:』 Terminals with heavy duty construction improves high temperature durability and closed design seals out the moisture, ensure connection reliability.
high standard flared opening for easy wire insertion..
★『UL Approved:』 These marine grade SC ring terminals are UL Approved, comply with all relevant European standards. Wire can be crimped or soldered to copper lugs, more safe..
★『Application:』 These battery cable lugs are safe and reliable, great for distribution box, marine, golf carts, solar panels, home applications, etc..
12PCS 6x3/8 Tinned Copper Ring Terminal Connectors 6 AWG Heavy Duty Battery Cable Ends Bare Copper Lugs with 12 PCS 3:1 Heat Shrink Tubing for Vehicle Boat Marine Use
In this kit,we offer 12pcs 6awg heavy-duty lugs with a 3/8 screw size ring,corresponding matching 3:1 red and black heat shrinkable tube..
The ring terminal connector made of high-quality copper content of 99.95%,good electrical conductivity.The 3:1 shrink tube is well made of high quality environmental material,thick and durable..
The wire lugs connector can be easily crimped or soldered,the heat shrink fit solid or stranded gauge wire,heat shrink provides tight and full seal,prevents leakage of any solder..
The ring terminal connector application areas:military/aerospace,household appliances,lighting electronics,automotive electronics,new energy,the 3:1 adhesive-lined heat shrinkable tubing black and red,can be applied in industry,environmental protection material..
If you receive a defective product or have any problems with the product,please feel free to contact us,We will provide you with satisfactory service at any time..