ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire
ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.
Action Camera Accessories Kit for GoPro Hero 8/Hero 7 Black/Hero 6 5 Mojosketch Accessory Bundle Set for AKASO EK5000 EK7000 4K WiFi Apeman DJI OSMO Action SJ6000 DBPOWER AKASO VicTsing Rollei Lightdo
【Compatible with】- GoPro Hero 8 7 6 5 4 3+ 3 2 1 Black Silver SJ4000/ SJ5000/ SJ6000, also for SJCAM SJ4000 5000 6000 7000 Xiaomi Yi, Apeman DBPOWER Lightdow WiMiUS Rollei IceFox ODRVM. Meet your different sports needs.
【Quality Carrying Case】- It’s very convenient to keep all accessories and your camera together. A necessity for traveling and outdoor sports. Size: 12.8×8.46×2.48″/ 32.5×21.5×6.3cm.
【Various Straps】- 360-degree Rotation Wrist Strap with a screw fix your GoPro on the wrist,the angle can be adjusted freely.
Flexible Chest Harness is used to equip your action camera comfortably.
Vented Helmet Strap helps to attach camera on the forehead, which provides a wider angle and horizon..
【Floating Handle + Long Screw】- Mainly Applied to water sports. Brightly yellow color makes camera easily to be found and avoids losing, dropping..
【Suction Cup Mount】- Attached to any smooth surfaces firmly with super suction power, such as surfboard, skiing board, ceramic surfaces, car windshield, plate glass door, car window and roof etc..
ZTHY V-Mount V-Lock Battery 154Wh 10400mAh with Upgrade D-tap 5A Output Charger Compatible with Sony Video Camera BMPCC 4k 6k Camcorder Broadcast LED Light BP-160 Battery Replacement Brick for DSLR
【Specifications】Battery Type: Li-ion. Color: Black. High Capacity: 10400mAh/ 154Wh . Voltage: 14.8V. Providing 1.5 times the lifetime of the....
【Compatibility】 ARRI Alexa Minicamera, Canon Cameras EOS C100/C300/C500/5D/7D/60D, AJA CION Camera Body, Blackmagic BMPCC Design URSA camera....
【High Performance】Shorter Charging Time with Upgrade 5A Output D-tap Charger. Unlike other 2A output chargers, our 5A upgrade charger can reduce a....
【Security】All ZTHY batteries have complied with CE, FCC, ROHS certified and standards, built-in professional intelligent protection board....
【ZTHY Camera Battery Return Policy】Rest assured with 30 days Refund and 12 months warranty, also get our friendly customer service..
Beedove Video Conference Lighting Kit, Dimmable Webcam Light for Zoom Meeting Calls, Remote Working, Self Broadcasting, Live Streaming, Selfie, Computer Monitor, Laptop, iPad, Camera Video Light
...lighting kit can make your visual world more beautiful and glorious.
look nicer when you video with families and friends. With this light, your images on Instagram and Facebook will be more beautiful and charming. It will bring you a good lighting effect when you record YouTube videos. Under the illumination of the camera light set, your photos will be more vivid..
Color Temperature and Brightness Adjustable Light: This wireless video conference lighting with soft light board, zoom lighting for computer makes supplementary light softer and not dazzling, and will protect your eyes well. Brightness from 0%-100% dimmable, can be adjusted up to 10 levels. Adjust the color temperature (warm, nature, cold) to get the ideal lighting for wherever you’re working and your skin tone. Light up your face for a more professional appearance and presence..
3500mAh Chargeable Battery Lighting: The rechargeable camera light is built-in 2000mAh rechargeable lithium battery, charging time is 3 hours, minimum brightness output up to 12 hours. It supports with Type-C charging port and Micro USB port, easy to charge with many device such as power plug, computer, laptop, power bank..
Convenient to Use with 3 Mount and Portable Size: This lighting kit with 3 different mo....
iFlight 3D Printed Case with BEC Board for NakedHero 8 Camera for Alpha C85 Pusher Protek25 Protek35 FPV Whoop Drone
iFlight BEC board with 3D Printed Case designed for NakedGoPro Hero 8 ,super light weight,makes your naked camera 8 lighter and easier to install on your drone.
BEC output voltage is 5V 2A,avoid the accident of power off which is caused by the insufficient power supply for the FC board.
Integrated stock buttons for GoPro, Power/Mode Button, Record Button, and LED to know the status of the camera. The pad is available for pilots to control the camera recording via the radio transmitter..
With the pluggable connector, which is easier to connect with your flight controller for power supply and recording.
About the setup on betaflight and the assembly guide,please check the second image and third image or the listing description.
Aoicrie for Raspberry pi Zero Camera Module 5MP 1080p OV5647 Sensor Video Compatible with Pi Zero Ribbon Cable&FPC Cable for Raspberry Pi Model A/B/B+,Pi 2 for Raspberry Pi 3,3B+ Pi Zero/Zero W Pi 4
for Raspberry Pi Zero CSI Camera Module with Fixed Focus Lens Camera module for Raspberry Pi, Fully compatible for Raspberry Pi A, B, B+, 2, 3, 3B+.Pi 4.Zero Zero W and 720p The camera is supported in the latest version of Raspbian,the for Raspberry Pi's preferred operating system.Work natively with all for Raspberry Pi models for your new project or drop-in replacement..
High-Definition video camera, The sensor itself has a native resolution of 5 megapixel. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 HD video recording.Easy plug and play type capability，Can be applied to image recognition and image tracking..
Both cables 2 cables included between the camera connectors for the Pi Zero and Model A&B series,The module attaches to for Raspberry Pi, by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras.15CM Golden Ribben Flex Cable for Raspberry Pi Zero Zerow, model: FPC.
5.90in/15cm and 19.68in/50cm white camera cable for Raspberry Pi Model A/B/B+, Pi 2 and for Raspberry Pi 4 3, 3B+, model: FFC.The C.
Connect the included ribbon cable to the CSI (Camer....
Navitech 60-in-1 Action Camera Accessories Combo Kit with EVA Case Compatible with The Intova ConneX | Dub | Duo | HD2 | Nova HD | X2 Action CameraIntova Sport Pro HD Video Camera
Strap Mounts: wrist strap is rotatable in 360-degree, with a screw that can fix your GoPro on the wrist. The angle can be freely adjusted.
The Chest and Helmet Straps allows you to attach camera on your body or head, so you can concentrate on hiking/cycling.
Prevent your camera from being foggy and wet.These are reusable -- you can use them again once they get dry. And 12 pcs are included in the package so no need to worry about running out of them.
Floating Handle+ Surfing Board Mount] Apply to water sports.Provide a comfortable and steady way to shoot in the water. The bright color also marks your camera which avoid losing.
Attach your photography devices on your bike, keep your hands free while recording.
Includes 60 accessories, meets different sport needs, and compatible with most of action cameras. Check our package contents for the details..
Camera Light, Dazzne D20 Video Light Panel with DC Adapter and Rechargeable Battery via USB-C Directly, Bi-Color 3200K-5600k DSLR Light for Canon/Nikon/Samsung/Olympus and Portrait Photography
Edge-mounted Key Light --- Installed at the edge, with professional soft light board. Video light adopts LCD screen, which can clearly check brightness, color temperature, power, and control dimming parameters reliably and accurately. Very handy for indoor studio, camera lighting or outdoor photography/video lighting to boost your productivity..
1/4 Cold Shoe --- LED panel light comes with standard cold shoe mount, 1/4 inch hole compatible with DSLR, camcorder, tripod, stand and light stand. Camera light with adjustable angle knob and hot shoe locking device for easy angle adjustment to provide optimal lighting for shooting needs..
Why choose us? --- The package includes LED panel light *1, NP-F550 Battery *1, 1M TYPE-C data cable*1, 3M long adapter*1. Dazzne brand focuses on professional photography lights, camera lights, video lights for 20 years, and pays great attention to user experience. All of our products is rigorously tested and comes with a 1 year warranty. If you have any problems, please feel free to contact us, we will reply you within 12 hours!.
SainSmart XBee USB Adapter for Arduino UNO MEGA R3 Mega2560 Duemilanove Nano Robot
This camera module is designed for NVIDIA Jetson Nano Board and Raspberry PI CM3..
With 8-megapixel IMX219 sensor and features the fixed focus77-degree field of view. (The drive board is no longer needed.).
Support 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording. With the power interface, it also supports 3.3V output power supply..
This camera module is widely used for AI intelligent recognition, face recognition, road identification line recognition, license plate recognition,....
If you have any questions about the product, please feel free to contact us..
waveshare Original Raspberry Pi Compute Module 4 IO Board for All Variants of Compute Module 4,with Real-Time Clock Dual MIPI DSI/CSI Interfaces,USB Connectors
The Compute Module 4 IO Board is a companion board for all variants of Raspberry Pi Compute Module 4(supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products..
The Compute Module 4 IO Board is designed to allow you to create systems quickly using off-theshelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB. The major user connectors are located along one side to make enclosures simple..
Connectors: Standard Raspberry Pi HAT connectors with PoE support. Standard PCIe Gen 2 x1 socket. Various jumpers to disable specific features, e.g. wireless connectivity, EEPROM writing..
RTC : Real-time clock with battery socket and ability to wake Compute Module 4 Video: 2 x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable) Camera: 2 x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable).
USB: 2 x USB 2.0 connectors. Micro USB socket for updating Compute Module 4. Ethernet: Gigabit Ethernet RJ45 with PoE support..
