Best Combining Saws

Lackmond SG20SPL1421 SPL Series Dry Cut Diamond Blade for Cured Concrete 20-Inch by .140 by 1-Inch

  • Dry cut diamond blade for cutting cured concrete outside 48 hours old.
  • Bonded and designed for use on wall saws, air saws and low horsepower walk behind saws.
  • Pre and post-tensioned steel core to eliminate loss of tension and "run-out" during cutting conditions.
  • Delivers excellent speed of cut while maximizing longevity.
Check Stock

KASCO Kam-Lok 25 Inch Professional Commercial Butcher Meat Hand Saw

  • Features a metal trigger blade tightener (caoo the Kam-Lok Lever), Stainless Steel frame and a contoured ABS Solid plastic grip handle. The Weston Brand Butcher Saws have a plastic trigger lock (trigger blade tightener). Cheap Bone Saws have a hollow plastic handle that breaks VERY easily when dropped. Easily lasts a lifetime. The blade will NOT bend when cutting and is very taut - not flimsy like the much cheaper meat saws..
  • Comes with 1 saw blade installed. And 1 extra saw blade FREE! Always face teeth toward front of meat hand saw - just the opposite of a wood saw. Pin to pin measurement on blade is EXACTLY 25 Inches. Overall length of blade is 25.5 inches. Many cheap Butcher Hand Saws will have a variance of up to 1/4 inch - which makes the blade wobbley and unstable - and almost impossible to cut meat with..
  • If you are planning to process beefs or hogs - you Definitely NEED this Meat Handsaw! This Butcher Saw should last for decades - we've been using the same Bone Saw here at our meat processing plant for the last 14 years. We have tried some of the other cheap meat handsaws in the past. None have compared to the KASCO Meat Handsaw..
  • Includes an extra blade FREE! Total of 2 blades included with your 25 Inch Meat Handsaw. Replacement blades av....
Check Stock

Bosch HSBIM9 General-Purpose 9 pc. Bi-Metal Hole Saw Kit

  • All-in-one kit – features two SpinLOCK Universal arbors, steel pilot bit and six hole saws with Progressor tooth design.
  • SpinLOCK universal arbor – fits all brands and sizes to simplify diameter changes with fast plug removal and tool-free install.
  • The pilot bit – designed to start holes in a variety of materials.
  • Progressor tooth design – hole saws feature alternating teeth size for performance, cutting faster and lasting longer in wood, metal and plastic materials.
  • Durable hole saw material – hole saws are made with 8% cobalt alloy.
Check Stock

WEN BL0740 7.25-Inch 40-Tooth Carbide-Tipped Professional Finish Saw Blade for Miter Saws and Circular Saws

  • Features a 7.25-inch diameter (185 mm) and a 5/8-inch arbor (15.875 mm).
  • Ultra-thin 1/16-inch kerf (1.6 mm) provides clean and efficient cuts.
  • Designed with 40 wear-resistant carbide-tipped ATB teeth.
  • Compatible with the majority of 7-1/4-inch miter saws, chop saws, and circular saws.
Check Stock

WEN BL0724 7.25-Inch 24-Tooth Carbide-Tipped Professional Framing Saw Blade for Miter Saws and Circular Saws

  • Features a 7.25-inch diameter (185 mm) and a 5/8-inch arbor (15.875 mm).
  • Ultra-thin 1/16-inch kerf (1.6 mm) provides clean and efficient cuts.
  • Designed with 24 wear-resistant carbide-tipped ATB teeth.
  • Compatible with the majority of 7-1/4-inch miter saws, chop saws, and circular saws.
Check Stock

Atwood 87701 Fifth Wheel Landing Gear Dual Motor Switch

  • NEW GENERATION: Addition of two tool outlets, no need extra extension socket, avoid messy cords and save time.
  • CONFIGURABLE ACTUATION THRESHOLD: 30W/60W, you can select flexibly appropriate actuation threshold according to your actual condition. Prevent vacuum....
  • CONFIGURABLE SHUTOFF DELAY TIME: Automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris....
  • TURN ON DELAY & SAFETY: Automatic delays 1s to turn on the vacuum when you start your tool, which avoids circuit overload or tripping. Adopting....
  • COMPATIBILITY: Supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Table Saws, Power Sanders,....
Check Stock

WEN BL1466 14-Inch 66-Tooth Carbide-Tipped Professional Metal Saw Blade for Mild Steel Cutting

  • Featuring a 14-inch diameter (355 mm), a 1-inch arbor (25.4 mm), and a rating of up to 1450 RPM.
  • Perfect for dry-cutting through steel and metal, including pipes, tubes, angle iron, and other ferrous metals.
  • Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts.
  • Designed with 66 carbide-tipped teeth for general-purpose mild steel cutting.
  • Compatible with 14-inch dry-cut metal saws, chop saws and circular saws.
Check Stock

WEN BL1490 14-Inch 90-Tooth Carbide-Tipped Professional Metal Saw Blade for Thin Steel Cutting

  • Featuring a 14-inch diameter (355 mm), a 1-inch arbor (25.4 mm), and a rating of up to 1450 RPM.
  • Perfect for dry-cutting through steel and metal, including pipes, tubes, angle iron, and other ferrous metals.
  • Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts.
  • Designed with 90 carbide-tipped teeth for general-purpose mild steel cutting.
  • Compatible with 14-inch dry-cut metal saws, chop saws and circular saws.
Check Stock

WEN BL1280 12-Inch 80-Tooth Fine-Finish Professional Woodworking Saw Blade for Miter Saws and Table Saws

  • Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM.
  • Perfect for slicing through both hard and softwoods of all kinds.
  • Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts.
  • Designed with 80 carbide-tipped teeth for fine-finish wood cutting.
  • Compatible with the majority of 12-inch miter saws, jobsite saws, and table saws.
Check Stock

WEN BL1248 12-Inch 48-Tooth Carbide-Tipped Professional Woodworking Saw Blade for Miter Saws and Table Saws

  • Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM.
  • Perfect for slicing through both hard and softwoods of all kinds.
  • Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts.
  • Designed with 48 carbide-tipped teeth for general-purpose wood cutting.
  • Compatible with the majority of 12-inch miter saws, jobsite saws, and table saws.
Check Stock