Best Compact Flash Ide

CY IDE/PATA 40Pin Disk to SATA Female Adapter PCBA Converter for Desktop & 3.5" Hard Disk Drive

  • for Desktop & 3.5" Hard Disk Drive , Works with all IDE 40Pin Drives up to 1000GB.
  • Supports IDE 66/100/133MB/s . Adapter is good for up grading an old computer with 3.5 inch IDE HDD to a new 3.5 inch SATA HDD or SSD..
  • No driver needed, plug and play, unit is not hot swappable. Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux..
  • 3.5 inch IDE/PATA 40Pin HDD Drive to SATA Female Converter Adapter PCBA.
Check Stock

Coolgear USB 3.0 to PATA and SATA 3.5 and 2.5 inch Hard Drive Adapter

  • DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector..
  • Allow to operate three HDDs Simultaneously. Data transfer rates up to 5 Gbps, backward compatible with USB 2.0/1.1..
  • Included 12V 2A power cable is for providing stable electricity supply. Note: 4PIN Power Cable is designed for 3.5’’ IDE drive, SATA drives are not applicable and unnecessary..
  • On/Off Switch for HDD protection. LED light shows power and activity status..
  • What we offer: USB 3.0 to IDE+SATA Adapter, USB 3.0 Cable, 4PIN Power Cable, Power Adapter, OTB Software CD, 24h customer email support..
Check Stock

Generic SATA/PATA/IDE Drive to USB 2.0 Adapter Converter Cable for 2.5 / 3.5 Inch Hard Drive / 5 inch Optical Drive with External AC Power Adapter

  • Connect to the IDE device using USB interface and SATA device too.
  • Transfer rate upto 480MBps (USB 2.0 specification), limit depend on the IDE device/SATA device and the driver.
  • Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.).
  • External power adapter included, for power up the 5V/12V IDE/ATAPI devices Usage.
  • For easy connect to the IDE device / SATA device and make the hard disk device more portable.
Check Stock

USECL Laptop SATA to IDE Adapter 2.5 Inch Serial ATA HDD Hard Disk Drive or SSD to 44 Pin Male PATA Port Converter Vertical Type

  • SATA hard drive can be detected and used as a standard 2.5" IDE hard drive..
  • Convert all SATA type devices CD-ROM/CD-RW/DVD-ROM/DVD-RAM/DVD-RW/HDD into 2.5" IDE device..
  • Allow to connect a 7+15P SATA hard drive to a 44P IDE connector..
  • 7+15 Pin female design allows to connect directly to SATA hard drive without cables..
  • no driver installation is required. Compatible with any OS such as: Windows, DOS, Mac, Linux, etc. that support IDE/ATAPI....
Check Stock

SANOXY Black USB 2.0 to IDE 2.5\ Hard Disk Drive HDD Aluminum External Case Enclosure 500GB Max Capacity

  • SANOXY USB 2.0 to IDE HDD hard disk enclosure case 480Mbps. 2.5 inch USB 2.0 HDD IDE PATA Mobile Hard Disk External Storage Enclosure Box For Laptop IDE Hard Disk Storage system solution easy set up simple Plug & Play.
  • No external Power required. The USB 2.0 interface allows read and write large files up to 480mbits per second.
  • Compatibility windows ME/ 2000/ Vista, MAC OS/X 10.4 or above.
  • SANOXY external hard drive IDE enclosure use for sharing files and applications between laptops, computers and high speed back ups.
  • SANOXY WARRANTY: All purchases made from SANOXY AMAZON Store is covered under SANOXY WARRANTY. If you purchased through a different third party seller, please contact them directly. (Unauthorized reselling of SANOXY products is prohibited.).
Check Stock

StarTech.com Universal Hard Drive Docking Station for SATA and IDE - USB 3.0 Dock for 2.5'/3.5' HDDs/SSDs with UASP (UNIDOCKU33), Black

  • EASY TO USE: The external hard drive docking station enables you to instantly access your 2.5 or 3.5in IDE and SATA hard drives through two top loading drive slots..
  • ENHANCED WITH UASP: This USB 3.0 universal HDD / SSD dock increases performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller..
  • SMART DESIGN: This USB 3.0 universal docking station has a single USB 3.0 connection to your host computer, enables access to both the IDE & SATA hard drives simultaneously..
  • INCREASED PERFORMANCE: The dual hard drive docking station can be used to greatly increase the storage and backup capabilities of your computer system with support for high capacity drives..
  • Connect both an IDE and a SATA 2.5 & 3.5in HDD or SSD to your computer using USB 3.0, with support for UASP for optimal performance.
  • works with USB desktop & laptop computers and SATA & IDE drives such as Samsung 840 EVO.
  • hard drive dock / HDD & SSD docking station / hard drive dock / SSD dock / HDD dock.
  • Test or benchmark virtually any hard drive or solid state drive.
  • Transfer files directly between SATA and IDE drives without a host computer.
Check Stock

Vantec SATA/IDE TO USB 3.0 Adapter (CB-ISA225-U3)

  • Compact And Lightweight Design For Easy Storage.
  • Supports 2.5" & 3.5" IDE & SATA I/II/III, SSDs, Hard Drives, CD/DVD/Blu-ray Drives.
  • Supports 5.25" Optical CD/DVD/Blu-ray Drives.
  • Hot-Swappable: Plug & Play Without Rebooting.
  • Optimized for any speed, SATA I/II/ III HDD/SSD/ODD.
Check Stock

3Pcs ESP8266 ESP-12E,Aideepen NodeMCU ESP8266 30PIN ESP-12E Development Board Wi Fi WLAN WL Module CP2102 for NodeMCU for ESP-12E for Arduin0

  • 【ESP8266】This is ESP8266 V2 Nodemcu Lua development board,works great with the latest Compatible with Arduin IDE/Mongoose IoT/Micropython..
  • 【30PIN】ESP8266 CP2102 chip.it's easy to program,without having to press the flash and reset buttons before each flash operation..
  • 【NodeMcu】NodeMcu is an open source Lua based firmware for the ESP8266, ultra low cost wireless modules, development boards for rapid prototyping, integrated with ESP8266 chips..
  • 【Easy】The ESP8266 has powerful on-board processing and storage capabilities.and has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board very easy to use..
  • 【Why choose us】You can use it with our development board ASIN B0B85C98FX,to make your project more convenient and efficient.Aideepen specializes in various electronic components,please feel free to contact us..
Check Stock

WEme USB 3.0 to SATA IDE Adapter with Universal 2.5\ 3.5\ Hard Drive Disk Converter for HDD SSD and IDE HDD, Support 12TB and One-Touch Backup, Include 12V 2A Power Adapter and USB 3.0 Cable for Laptop

  • Connect your SATA / IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with 2.5"/3.5" IDE/SATA hard drives and DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Compatible read up to three hard drives simultaneously!.
  • One Touch Backup (OTB) Function. Design for people who need to backup data from your computer to portable hard drive. (Please install the included OTB Software CD. OTB function doesn't work for Mac OS and Linux).
  • Plug and Play, Hot- swappable, no driver needed. On/Off Switch design for HDD protection. Led light shows power and activity status..
  • Support 2 IDE and 1 SATA hard drives connecting simultaneously! Compatible with two IDE hard drives simultaneously, If not, Please set the 3.5'' IDE to be the slave drive based on the instruction on the hard drive.
  • SuperSpeed USB 3.0 enables data transfer rates of up to 5Gbps, downwards compatible with USB 2.0(high-speed 480 Mbps) / USB 1.1(full-speed 12 Mbps) standards. The actual transmission speed subjects to the setting of the device connected.
Check Stock

Tccmebius TCC-S865 USB 3.0 to SATA IDE Dual Slots External Transparent Hard Drive Docking Station with Card Reader and 2 Ports USB 3.0 Hub for 2.5 3.5 Inch IDE SATA I/II/III HDD SSD

  • Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports all 2.5 "/ 3.5" IDE / SATA I / II / III hard disk and SSD, Maximum support 8TB SATA interface Hard disk, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
  • Data transfer: Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard disk to your computer via USB 3.0 port, USB 3.0 data transfer rate up to 5 Gbps. Integrated card reader (TF card / SD card), at the same time card reader can read only one memory card, up to 64GB..
  • Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
  • WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support from Tccmebius. In use of products during any product issues, please email to us, we will do our best to solve for you, thank you for your understanding and support..
Check Stock