Best Compact Multiplexer

16-Channel BNC Video Multiplexer Picture-in-Picture Video Processor

  • Advanced 16-channel video multiplexer mixer for real-time multi-channel display on one screen. Full duplex operation for displaying and recording all of its video channels simultaneously..
  • Ideal for security monitoring or video preview application where multiple images are needed. Split-screen modes and PIP locations can be manually configured with ease by the front panel, IR remote or RS232 console..
  • 16 individual input buttons for fast switching between each video input. 16 video pass-through ports. 3 video outputs including 2 composite BNC/RCA video outputs and 1 VGA out at 1024x768 for live viewing and recording..
  • 4 audio inputs with 1 audio output. 16 screen mode options presented in 16/9/8/4/3-grid, quad screen, PIP, picture-by-picture style or single channel full screen. Easy selection for main channel, sub/PIP channel via front push buttons or IR remote for best suited visual presentation..
  • Supports RS232 long range control and camera control by RS485 connection. Supports time/date stamp and auto sequential switching function with adjustable dwelling time..
Check Stock

Todiys New 10Pcs for 74HC32 74HC32N SN74HC32 SN74HC32N MC74HC32AN HD74HC32P DIP-14 Logic Gate Quad 2-Input OR Gates SN74HC32N

  • The most popular 74LSx series IC chip kit..
  • There are 2 models for each model, a total of 20, placed in a convenient box..
  • A new product that is capable of meeting the data requirements at work..
  • 74LS00 2 input four NAND gate, 74LS02 2 input quad NAND gate, 74LS04 six inverter..
  • 74LS138 3-8 line translator / multiplexer..
Check Stock

9x1 Tiling 4K Multiviewer Multiplexer 9 Screen Processor PIP Controller Switcher Downscaling Switch HD 1080p Source Picture in Picture Savant Control4 RTI URC

  • This 4K processor allows you to display up to 9 HDMI sources to 1 HDMI TV. Its often referred to as a Tiling, Multiplexer, Multiviewer, or Picture in Picture (PIP).
  • Many different modes for you to choose from to display from 1 to 9 of your HDMI sources on your TV.
  • Complete control built-in to the processor for you to access with any Computer, Tablet, or Phone.
  • Audio outputs allow you to feed external soundbars, speakers, or amplifiers, and lets you choose which input source you want to listen to.
  • We have IP and RS232 serial drivers written for most major control systems including Crestron, Control4, Savant, URC, RTI, and Simple Control!.
Check Stock

AllAboutAdapters Composite S-Video to Component Video RGB Sync On Green Converter

  • Dual-purpose composite RCA video and S-video to YUV/RGB converter with selectable component video output and 15Khz RGsB output. Selectable composite video/s-video input via manual push button..
  • Selectable video output format between 15Khz RGsB and interlaced YCbCr. Converting standard composite video or S-Video signal into interlaced component YCbCr video output at 480i/576i for TV or projector display..
  • Converting standard composite video or S-Video signal into RGB at 15.625Khz/50Hz or 15.734Khz/60Hz ouput for RGB monitor display. Restores analog video feed to component/RGB type video with all the vibrant and rich color information accurately presented again..
  • Crisp and clean output with full color depth via component/RGB format. Great video adapter for connecting CCTV video surveillance camera system or DVR, quad processor or video multiplexer to component video or RGB video for large screen display..
  • Premium SOG video sync adapter for monitors requiring RGB sync on green type for the input. Automatic video input system detection for NTSC/PAL/SECAM devices. Supports worldwide video system including NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N and SECAM..
Check Stock

Kiro&Seeu 2PCS CD74HC4067 16 Channel Analog Digital Multiplexer MUX Breakout Board CD74HC4067 Precise Module Compatible with Ar-duino DIY D74HC4067-16CH-2P

  • Use the CD74HC4067 16-channel analog signal switch.
  • Analog signal input: C0-C15 16 channels..
  • This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067..
  • This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction..
  • To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!.
Check Stock

Big CMOS Logic 4000 4500 IC Series Assortment Box 46 Types, 120 pcs, CD4001 CD4011 CD4017 CD4022 CD4027 CD4047 CD4049UBE CD4060 CD4071 CD4081 CD4503 CD4543 CD4553 etc.

  • Big Logic IC Assortment, 46 Types: CD4001, CD4011, CD4013, CD4015, CD4016, CD4017, C4021, CD4022, CD4023, CD4024, CD4025, CD4026, CD4027, CD4028, CD4029, CD4033, CD4042, CD4043, CD4046, CD4047, CD4049UBE, CD4050, CD4051, CD4052, CD4053, CD4060, CD4063, CD4066, CD4069, CD4070, CD4071, CD4072, CD4073, CD4075, CD4077, CD4081, CD4082, CD4093,CD4094, CD4503, CD4511, CD4518, CD4520, CD4541, CD4543, CD4553.
  • Every IC Type has 2 pcs, CD4017 and CD4049UBE are 4 pcs each.
  • Includes 10 pcs DIP-14 Sockets and 14 pcs DIP-16 Sockets.
  • Contains various usefull Logic ICs such as: NOR NAND OR AND Gates, Flip Flop, Shift Register, Bilateral Analog Switch, Decade Octal BCD Binary Counters, R/S Latch, Multivibrator, Hex Inverting Buffer, Multiplexer, Demultiplexer, Comparator, Exclusive Gate, Schmitt Trigger, Timer, PLL, 7-Segment Latch Decoder Driver, Frequency Divider.
  • Sorted accordingly in a labeled plastic box with pin configuration diagrams.
Check Stock

Ximimark 5Pcs 16CH Analog Digital Multiplexer Breakout Board Module CD74HC4067 CMOS Precise Module For Arduino

  • This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx)..
  • It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction..
  • To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!.
  • Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications,you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc..
  • The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prev....
Check Stock

4-Channel Mini Quad Video Processor with IR Remote + Multi-View Screen

  • Advanced 16-channel video multiplexer mixer for real-time multi-channel display on one screen. Full duplex operation for displaying and recording all of its video channels simultaneously. Ideal for security monitoring or video preview application where multiple images are needed. Split-screen modes and PIP locations can be manually configured with ease by the front panel, IR remote or RS232 console..
  • 16 individual input buttons for fast switching between each video input. 16 video pass-through ports. 3 video outputs including 2 composite BNC/RCA video outputs and 1 VGA out at 1024x768 for live viewing and recording. 4 audio inputs with 1 audio output..
  • 16 screen mode options presented in 16/9/8/4/3-grid, quad screen, PIP, picture-by-picture style or single channel full screen. Easy selection for main channel, sub/PIP channel via front push buttons or IR remote for best suited visual presentation. Supports RS232 long range control and camera control by RS485 connection. Supports time/date stamp and auto sequential switching function with adjustable dwelling time..
  • Supports programmable motion detection area and sensitivity levels for each camera/input. Flexible external alarm input/output configurations. Supports automatic video loss detection, moti....
Check Stock

16-Channel RCA BNC Video Multiplexer Picture-in-Picture Generator

  • Advanced 16-channel video multiplexer mixer for real-time multi-channel display on one screen. Full duplex operation for displaying and recording all of its video channels simultaneously. Ideal for security monitoring or video preview application where multiple images are needed. Split-screen modes and PIP locations can be manually configured with ease by the front panel, IR remote or RS232 console. 16 individual input buttons for fast switching between each video input..
  • 16 video pass-through ports. 3 video outputs including 2 composite BNC/RCA video outputs and 1 VGA out at 1024x768 for live viewing and recording. 4 audio inputs with 1 audio output. 16 screen mode options presented in 16/9/8/4/3-grid, quad screen, PIP, picture-by-picture style or single channel full screen. Easy selection for main channel, sub/PIP channel via front push buttons or IR remote for best suited visual presentation..
  • Supports RS232 long range control and camera control by RS485 connection. Supports time/date stamp and auto sequential switching function with adjustable dwelling time. Supports programmable motion detection area and sensitivity levels for each camera/input. Flexible external alarm input/output configurations. Supports automatic video loss detection, moti....
Check Stock

12Pcs CD74HC4067 16-Channel Analog Digital Multiplexer MUX Breakout Board Module CD74HC4067 CMOS Precise Module Compatible with DIY

  • CD74HC4067 board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer, use the CD74HC4067 16-channel analog signal switch.
  • It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.If you want two-way communications,you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc..
  • The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching. The board also breaks out the chip’s “enable” pin, which when driven high, will completely disconnect the common pin (all switches “off”)..
  • To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins..
  • Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devi....
Check Stock