CREALITY CR Touch Auto Bed Leveling Kit Upgrade Level Sensor for Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5/Ender 5 Pro/CR10 3D Printer with 32 bit V4.2.2/V4.2.7 Mainboard
[A GIFT FOR THE WHOLE FAMILY] Create, Draw, Doodle, and Build in 3D with this affordable yet high grade 3D pen. The new SCRIB3D P1 3D Pen helps....
[READY-TO-USE KIT] Includes 3 colors (30 feet) of PLA plastic to keep you Doodling for ages, as well as a power adapter, step-by-step manual, and a....
[BEGINNER FRIENDLY] Plug the adapter into the back of the pen and choose your filament. The red light will turn on indicating warm up, this will take....
[MULTI-FUNCTIONAL] The SCRIB3D P1 Pen is temperature adjustable to accommodate multiple types of filament: PLA (160-210℃, 320-410°F) or ABS....
[SAFE & RISK FREE PURCHASE] The P1's ceramic nozzle and premium motor ensure safety and high performance without clogging. Equipped with 2 minute auto....
①【SUNLU PLA 3D Filament】PLA 3D filament is the most basic, the most used filament, no clog, no bubble, no tangle, SUNLU PLA filament has good layer adhesion, easy to use..
②【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
③【2KG PLA 3D Filament】SUNLU 2KG PLA filament MasterSpool includes 1 reusable spool(MasterSpool) and 2 rolls PLA 3D printer filament 1.75mm refills, '1+2' combination..
④【Reusable MasterSpool】SUNLU MasterSpool is reusable, it's compatible with many brands of 3D printing filament refills(spool-less filament), which is a good idea to reduce waste and cost..
⑤【Recommend Settings】We recommend print the PLA filament at a nozzle temperature of 215-230°C, bed temperature of 60-80°C, printing speed of 40-80mm/s..
Upgraded 3D Printer Filament Dryer, SUNLU Dry Box for Filament Storage, Keep Filament Dry During 3D Printing, Compatible with 1.75mm, 2.85mm, 3.00mm 3D Filament, Filament Holder
【SUNLU Dryer and Storage Box】SUNLU dryer box is specifically made for drying 3d printer filament, intended to remove moisture from the filament. It can keep the 3d filament dry during printing and can be used as a filament storage box..
【Rapid Heating and Constant Temperature】The dryer box can be quickly heated to the preset temperature, and keep working within the preset time. The built-in rotating shafts keep rotating the filament, evenly heated and remove moisture..
【Large Capacity and Useful Design】Maximum capacity of the Dry box is 210*85mm, it works perfectly with 1.75mm/2.85mm/3.00mm diameters filament. It's designed with a transparent lid that you could check the filament without open the lid..
【Simple but Effective】The dryer box is pretty easy to use, it crams in a lot of functionality even with only two buttons(set temperature, time and more). It can help to keep moisture out of the filament, get dry and stay dry..
【Multiple Settings】The temperature ranges is 35-55℃, the working time range is 0-6 hours, you can set different temperatures and times for different materials of filament, get the filament dry and have better print results, very useful..
SUNLU PLA Filament 1.75mm, 3D Printing Filament PLA Refill, Dimensional Accuracy +/- 0.02mm, 1kg (2.2lbs), Spool-Less Filament, Black PLA 1.75
① 【SUNLU PLA 3D Filament】PLA 3D filament is the most basic, the most used filament, no clog, no bubble, no tangle, SUNLU PLA filament has good layer adhesion, easy to use..
②【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
③【High Compatibility Refill】SUNLU PLA 1.75mm filament refill is compatible with many brands of MasterSpool, MasterSpool is re-usable, a good idea in reducing waste and cost..
④【1KG PLA 3D Filament】SUNLU 1KG PLA filament refill only includes 1 roll PLA 3D printer filament 1.75mm refill, no spool(spool-less). Please use with reusable spool(MasterSpool)..
⑤【Recommend Settings】We recommend print the PLA filament at a nozzle temperature of 215-230°C, bed temperature of 60-80°C, printing speed of 40-80mm/s..
⑥【SUNLU Professional Team】SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D filament, 3D printer, 3D pen, filament dryer, 3D resin and resin UV light curing box..
Upgraded 3D Printer Filament Dryer Box, SUNLU Filament Dehydrator Dry Box, Keep Filament Dry During 3D Printing, Spool Holder,Compatible with 1.75mm, 2.85mm, 3.00mm Filament,Storage Box
①【Keep dry, good printing effect】Dust-free, moisture-free. 3D printer filaments are hygroscopic, moisture can cause printing failure, SUNLU filament dryer box help to dry excess moisture, keep the filament dry, no more brittle PLA, PETG, ABS filament..
②【Fully assembled and easy to use】SUNLU dry box is simple to operate, turn on by hit either button, hold the left button to change the dry time, press the right button to change the temperature setting. SUNLU dryer box can be used as a spool holder. The bearings that hold the filaments are very stable and allow the filament to roll steadily..
③【Simple but Effective】The print quality will be better if using filament dried by SUNLU filament dehydrator box, surface smoother, layer adhesion increased. It can be more helpful if you live in a humid temperature zone.SUNLU filament dryer box is easy to open and the lid is transparent allowing direct inspection of the length of filament remaining in the box..
④【High Compatibility】The adjustable temperature(time) range is 35-55℃(0-24hours), SUNLU dryer box can bake most types of 1KG filament at a designated temperature for hours. Maximum capacity of the drying oven: 210*85 mm, can accommodate filament diameter: 1.75mm/2.85mm/3mm..
SUNLU Filament Dryer, FilaDryer S1 Filament Dry Box, Compatible with 99% of 1KG PLA PETG ABS TPU 3D Printer Filaments, Dehydrator Storage Box, Filament Spool Holder, Black
...ting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect..
【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc..
C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm..
【User-friendly Design&1 Year Guaranteed After-Sales Service】 A: The design of two rollers inside the box allows you to print while drying.
B: 2 inch large screen LCD monitor, can display temperature and time clearly and brightly.
C: Ultra quiet design, less than 10db while operating, no disturbing of your life and work.
D: Exquisite packaging design- best gift: Come on to buy one to present to your friends who love 3D printing.
EMITTING LED Candelabra Bulb, 4W Dimmable 60W Equivalent, 2700K Warm White 450LM,UL Listed E26 Base LED Candle Bulbs, CA11 (C35) Clear Glass Flame Shape Bent Tip(6 Pack)
Dimmable - Compatible with most types of dimmers and dimming the brightness of LED filament to satisfy your preference.
Provides 450 Lumens of light immediately to full brightness, 2700K Soft White to create a comfortable atmosphere for home.
Energy Efficiency - Replace 60 Watt incandescent bulb by 4W LED filament light bulb, up to 90% less energy than traditional incandescent lamp, Last about 25000 hours based on 3 hrs/day of use.
Suitable for Damp Location. Eco-Friendly - No mercury. High quality LED light bulbs with UL-Listed to avoid electrical shock and fire hazard.
Easy To Install - Standard E26 Medium Base for candelabra and chandelier or other E26 Medium screw Base blighting fixtures.
AMOLEN 3D Printer Filament,PLA Filament 1.75mm,Shiny Glow in The Dark,Starry Sky 3D Printing Filament,1kg
...✔UPGRADE GLOW FILAMENT - AMOLEN Specializes in researching Glow in the Dark Filament, using the most advanced Glow materials, PLA raw materials come from USA. All the glow filaments on the market are a bit brittle, please print with patience and keep the angle smooth when feeding.
✔HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
✔GLOW LIKE STARRY SKY - When not glow, the filament shows transparent and black with some spots. After charge, the spots will glow in the dark and shiny like starry sky. You can change the fulling to change the density of the stars. Higher filling will get more shiny spots..
✔VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage.
3D Pen Filament 320 Feet, 16 Colors，Each Color 20 Feet, Bonus 250 Stencils eBooks - 3D Printing Pen PLA Filament 1.75mm, High-Precision Diameter and Kids Safe Refill
...ting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect..
【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc..
C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm..
【User-friendly Design&1 Year Guaranteed After-Sales Service】 A: The design of two rollers inside the box allows you to print while drying.
B: 2 inch large screen LCD monitor, can display temperature and time clearly and brightly.
C: Ultra quiet design, less than 10db while operating, no disturbing of your life and work.
D: Exquisite packaging design- best gift: Come on to buy one to present to your friends who love 3D printing.
