GlowShift Diesel Gauge Package Compatible with Ford Super Duty F-250 F-350 6.0L 7.3L Power Stroke 1999-2007 - Tinted 7 Color 60 PSI Boost, 2400F EGT & Transmission Temp Gauges - Tan Triple Pillar Pod
...a Factory Color Matched Tan Triple Pillar Pod, Tinted 7 Color Series 3 Gauge Diesel Set, Boost MAP Line T-Fitting Adapter, 3 Gauge Power/Sensor Wiring Harness & an Installation Guide that Walks Users Through the Process of Installing the Gauges, Sensors & Pod Step-By-Step.
Includes 60 PSI Boost Gauge with 1/8-27 NPT Compression Fittings, 9' Nylon Boost Hose & Boost MAP Line T-Fitting Adapter - 2400°F Pyrometer EGT Gauge with 1/8-27 NPT EGT Probe with 3' of Wire, 6' Sensor Harness & 2' Power Harness - Transmission Temperature Gauge with 1/8-27 NPT Temperature Sensor & 2' Power/Sensor Harness - Tinted 7 Color Series Features a Black Dial, Tinted Lens, 7 Solid Color Modes & 2 Color Cycle Modes.
Factory Color Matched Tan Triple Pillar Pod for 1999-2007 Ford Super Duty 7.3L 6.0L Power Stroke F250 F350 Trucks Mounts 3 Gauges to the Truck's A-Pillar - Overlay Design Mounts Pod on Top of the Factory A-Pillar - Manufactured from ABS Plastic - UV Protected - Includes Mounting Hardware.
Includes Ford Super Duty 7.3L 6.0L Power Stroke Installation Guide Complete with Step-By-Step Instructions & Photos that Help Walk You Through the Process of Installing & Wiring this Diesel Gauge Package to Your Truck.
GlowShift Guarantee with One Year Limited Warranty & Free Lifet....
3 Packs 3/4 Inch GHT Female to NPT Male Connector, GHT to NPT Adapter Brass Garden Hose Connector Adapter Fitting to Pipe Fittings Connect with 6 Packs Extra Rubber Washer (1/2 Inch NPT Male)
Type: 3 Packs standard 3/4 inch garden hose thread female to 1/2 inch national pipe thread male with 6 packs extra rubber washer.
Material: these hose connectors are made of solid brass, durable and rustproof, more reliable than aluminum or plastic materials.
Size: garden hose thread: 3/4 inch GHT female.
Rubber washer: outer diameter is 25 mm/ 1 inch, inner diameter is 16 mm/ 5/8 inch, and its thickness is 3 mm/ 1/8 inch.
No leakage: these rubber faucet washers are designed with 4 small outer tabs to fix them in place firmly and properly, preventing washers from falling out of the hose fittings, do not interfere with the functionality of hose washer.
These garden washers fit all standard 3/4 inch garden hose fittings.
Application: our GHT female to NPT male connector has 2 sizes, including 3/4 inch GHT female to 3/4 inch NPT male, and 3/4 inch GHT female to 1/2 inch NPT male, please check your suitable hose size.
Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank | UM-3000
30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA i....
Class A Customs | T-10000 | One (1) RV Fresh Water 100 Gallon Tank, Grey Water | Ribbed for Extra Support
100 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 50” Longest Length (not including fittings) x 18” x 26” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (SIX) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in ....
Stainless steel quick coupler plug: 1/4’’ plug and male NPT thread..
Pressure washer adapter set are made of premium quality brass and stainless steel, durable, provides secure and quick fittings. Ball lock design ensures a solid connection..
Provides secure and quick fittings, simple to assemble and disassemble. Quick connect pressure washer gun, wand, hose or nozzle..
Male Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10
Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
High Quality Material: The connector made of high quality plastic and stainless steel.
corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..
Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK
30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
