Mustang Carbon Fiber Trunk Spoiler, GT350 Track Pack Spoiler Carbon Fiber, 2015 Mustang GT Spoiler for 2015-2021 Rear Trunk Wing Racing Spoiler, fit V6, EcoBoost, GT and GT350 2015-21
【Compatible Models】Precision Machined Aluminum Billet Plug for 2013-2020 Ford F150 2.7 or 3.5 E, Note: This does not apply to 2012 F150, they use a different configuration with 2 mechanical exhaust valves.
【Use】Using this vent valve plug, you can vent hot pressurized to atmosphere, reducing inlet temperature and improving overall performance over the entire operating range. You get clean exhaust valve sound and better performance without recirculating hot air and introducing unnecessary heat into the engine..
【Easy Installation】There is a large hose connecting the intake system to the exhaust valve with quick connect, snap-on/snap-on coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. That's it, the VTA mode is complete!.
【DESIGN】This VTA mod allows you to vent hot boost into the atmosphere instead of recycling it and producing a hotter inlet temperature. T....
RJSPHH Stainless steel 3 inch Electric Exhaust Cutout Motor E-cut Valve Kit , Catback Single Y Pipe 1 pcs with One Controller Remote Kit
The pipe is made of high quality 304 Stainless Steel ,the motel beside is made of high quality aluminum alloy..
The electric exhaust shut-off valve kit can not only change the sound wave, but also discharge gas from the engine faster through the remote control exhaust valve, thereby reducing the burning time and increasing the horsepower time and increasing horsepower.
To open the cutout you simply flip the which and it will open your exhaust for a throatly rumble exhaust note..
RYOBI ONE+ HP 18V Brushless Cordless Compact 1/4 in. Right Angle Die Grinder (Tool Only)
...lish virtually anywhere! It also features an integral safety-lock throttle lever so it prevents accidental start-up. Note: Please remove the DUST PLUG before insert the air connector..
【High Free Speed 】The Pneumatic straight die grinder operates at a maximum speed of 20,000 RPM continuous power with an air compressor, which allows for precision cutting, grinding, shaping, and sanding. Operating pressure: 90psi (6.3bar). Air consumption: 85.5l/min (3cfm). Note: Use sealant tape to avoid air leakage..
【Ideal for One-Handed Grip 】The small, lightweight design provides easy operation, and greater access to tight spots. The air die grinder measures 6-5/16 inch long and weighs 1lbs, comfortable for maneuvering and perfect for one-handed grip. With the ergonomically designed body, it is easy to hold for long work sessions..
【Rear Exhaust】This die grinder features a rear exhaust to direct air away from work, making the lower sound level possible, while also ensuring that the exhaust isn't hitting the operator in the face. The air inlet filter could keep the die grinder from contamination. Note: Add oil regularly is needed for all air tools (lubricant included)..
【Wide Application】 The air compressor usually provides higher RPM than the elec....
JACO Lightning S2-Series Tire Air Chuck - 1/4\ F-NPT | Open Flow (2 Pack)
...e tire valve stem with absolutely ZERO air loss - eliminating any margin for error when precision matters..
EASIEST TO USE - 360 swivel head eliminates tension on your air hose & lets you make adjustments without air leaks. Laser-cut 1/4" F-NPT fittings allow for seamless compatibility w/ tire gauges, inflators, and compressor attachments..
OPEN FLOW - feature laser-cut threaded fitting (1/4 inch F-NPT) for compatibility w/ tire inflators & gauges to control air flow from compressor w/ precision for tire inflation (not recommended to attach directly to air compressor hose)..
BUILT TO LAST - engineered by the experts at JACO w/ over 35 years of experience in the industry, and proudly backed by our 100% Lifetime Warranty. Experience firsthand the most revolutionary advancements to air chucks ever made with our exclusive Lightning Technology..
GOOFIT Completed Cylinder Head Replacement for 4 Stroke Chinese TaoTao Coolster 110cc Engine ATV Pit Quad Go Kart Dirt Bike
intake valve mounting hole distance:45mm/1.77".
Exhaust valve mounting hole distance:45mm/1.77".
Spark plug:A7TC(Please Be Carefully Check The Goods Appearance,Size,Shape Before Ordering)..
Completed Cylinder Head Replacement for 4 Stroke Chinese TaoTao Coolster 110cc Engine ATV Pit Quad Go Kart Dirt Bike.Not Replacement for 125cc Cylinder Head with 23mm and 28mm Intake and Exhaust valves.
52.4mm LIFAN 110CC 125cc Cylinder Engine.
Cylinders are used to hold gasoline and air,Where the mixture burns,Expands dramatically,And pushes the piston,Which transmits this force to the crankshaft..
High quality cylinder replacement part.High toughness,Corrosion resistance,Rustproof and durable.Has a good heat dissipation structure design,Providing reliable performance and long life service..
Warranty:We are always available to help our customers.If you are not satisfied with the order,please leave us a message.Wish you have a happy shopping experience,we are committed to providing the best service..
K Kits vary in their contents, but generally contain a camshaft, a set of lifters, valve springs, retainers, locks, valve seals, timing set, assembly....
Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note. Best with aftermarket converters....
Dreyoo Lock on Air Chuck, 1/4” FNPT Heavy Duty Closed Flow Tire Chuck for Tire Inflator Air Compressor Air Accessory Kit, Standard Bore Valve Stem Quick Connector for Valve Adapter (1)
Closed Flow: closed flow air chucks feature internal “check valves” that do not allow air to flow to or from the chuck unless the chuck is engaged with a tire valve stem, which makes them more efficient for using directly on an air compressor hose line, since they will not rapidly deplete the air tank unless engaged with a tire valve stem.
Easy to Use: pushed forward the sleeve to lock the valve stem and pulled back the sleeve to release the lock on air chuck, it makes things easy that you can use one hand to seal and release the chuck.
Standard Size: the top thread, 1/4 Inch FNPT.
Heavy Duty: the lock on air chuck, made of steel and zinc, can prevent rust.
The inside three claws are metal plating to protect them from oxidation.
Wide Use: the top thread is standard size 1/4 inch FNPT, fit for most tire inflator air compressor, air accessory kit, air compressor accessories, inflator gauge compressor accessories.
Acecare Charging Station Also Called Filling staion for Compressed air refilling
CONNECT. Connect compressor with valve to fill gases to tanks or pcp air guns..
WITH GAUGE. It is with gauge that shows the pressure in the tank or gun that receive the gases..
EASY TO INSTALL. It is easy to connect the valve and compressor, just very few steps..
WITH PRESSURE RELIEF KNOB. It is with pressure relief knob that will relief the rest pressure in hose to keep it safe when you take off it from valve..
WITH HOSE. The filling staion is with hose on it, and you do not need to prepare another hose when you fill gases..
