Acecare Charging Station Also Called Filling staion for Compressed air refilling
CONNECT. Connect compressor with valve to fill gases to tanks or pcp air guns..
WITH GAUGE. It is with gauge that shows the pressure in the tank or gun that receive the gases..
EASY TO INSTALL. It is easy to connect the valve and compressor, just very few steps..
WITH PRESSURE RELIEF KNOB. It is with pressure relief knob that will relief the rest pressure in hose to keep it safe when you take off it from valve..
WITH HOSE. The filling staion is with hose on it, and you do not need to prepare another hose when you fill gases..
Adjustable Pressure: Our PCP air compressor is made of copper wire and a 1800W motor. It can produce high pressure quickly and efficiently with a maximum pressure of 4500PSI. You can preset the pressure as you need, and the machine will stop automatically when the pressure reaches..
Water Cooling: This air rifle compressor adopts a water-cooling system equipped with an LED temperature display. The perfect temperature ranges from 50℃~70℃. Once the temperature reaches 75℃, you must stop the machine and change the water. Note: The water container is not included..
Various Safeguard: The paintball compressor features an explosion-proof valve, front and side fences, providing you more security and avoiding secondary hazards caused by improper use. Attention: To avoid danger, you must use the breathing valve to replace the oil plug before running the machine..
LED Thermometer: This air compressor is equipped with an upgraded LED thermometer to monitor the temperature. Compared to the digital one, the LED display is more clear and does not require a battery. Moreover, the cylinder is made of stainless steel, which provides the machine a long lifespan..
Various Application: The filtration device of the high pressure air compressor is a water & oil separato....
HEYTUR Inflatable Boat SUP Pump Adaptor Standard Schrader Conventional Air Pump Air Valve Adapter Spoke Plate Attachment(Black)
The HEYTUR inflatable stand up board valve adapter will allow you to connect any standard electric pump, foot pump or compressor to the schrader valve fitting, the standard valve for car and bicycle tires..
It works on the majority of inflatable stand up boards. It is also suitable for boats and kayaks which also use the Halkey-Roberts valve for inflation.Use your compressor or tire pump to easily reach 20 PSI.Be very careful not to over inflate your board or craft, and check the board's pressure frequently..
This is an adaptor only. The speed at which your board inflates will depend on the pump used.Because the compressors/tire pumps take time to inflate, it is recommended to inflate the board by hand hand pump until it becomes difficult to pump, and then use the adaptor to top off the pressure..
Remove your SUP valve cap and ensure that the valve is sealed for inflation by rotating the central pin into the outer/closed position.Insert the valve adapter into the SUP valve the same way as you would insert the pump hose nozzle. Connect any standard schrader pump to the valve adapter fitting to inflate your board. Monitor board pressure frequently while inflating!.
If you have any problems, please contact with us directly. Simply e-mail us the problem, the....
X AUTOHAUX Car AC Compressor Electronic Control Solenoid Valve PXE13 PXE16 for Audi A3 2007-2014
Compatibility: AC Compressor Control Solenoid Valve for Volkswagen Jetta 2005-2014, for Volkswagen Tiguan 2009-2015, for Volkswagen Beetle 2005-2014, for Volkswagen CC 2009-2014, for Volkswagen Golf 2005-2007, for Volkswagen Golf 2010-2013, for Volkswagen Passat 2007-2010, for Volkswagen Passat 2012-2015, for Volkswagen GTI 2006-2014, for Volkswagen Rabbit 2006-2009, for Audi A3 2007-2014.
OE Number: Suitable for PXE13, PXE16. Please check the OE number before purchasing the product..
Symptoms of a failing factory air conditioner compressor control valve including an air conditioner that does not blow cold air. Replacing the control solenoid valve solves the common problem with AC not blowing cold air..
Great cooling efficiency. The control solenoid valve is easy to install and convenient to use..
Please check the fitment and OE number before purchasing the product..
Air Intake Filter,Akozon 13mm/0.5in Mini Air Intake Filter Vent Crankcase Breather Universal Car Accessory(Noire )(black) for crankcase vent filter
APPLICABLE GEARBOX TYPES: MT/manual gearboxes are available in red, blue, silver, and black. Inner diameter: about 13 mm/0.5 inch. Outer diameter: about 50 mm/2 inches. for crankcase vent filter for pcv breather filter.
APPLICABLE GEARBOX TYPES: MT/manual gearboxes are available in red, blue, silver, and black. Inner diameter: about 0 mm/1 inch. Outer diameter: about 50 mm/2 inches. for crankcase vent filter.
EXCELLENT FUNCTION: The car air filter can increase the intake air flow, filter the impurities in the air, make the engine breathe more smoothly, prevent the dust suspended in the air from being sucked into the cylinder, and reduce the wear of the piston group and the cylinder. for 7/8" crankcase vent filter for d16 valve cover intake.
UNIQUE DESIGN: The unique shape reduces the air intake resistance of the engine and improves the air intake and volumetric efficiency per unit time when the engine is running. for valve cover breather for k n crankcase filter.
HIGH-QUALITY MATERIALS: The car air filter is made of Nonwoven Fabric, which is very breathable, very durable, and has a long service life, which enhances the ability of car air filtration. for crankcase breather filter for 301 predator valve vent filter.
SAFELIFE Bike Straight Presta Valve Tire Air Chuck 1 PC, L-Type Schrader Tire Chuck 1 PC for Bicycles, Motorcycles, Medium & Small Cars - 1/4" NPT Open Flow
Ready to use tire chuck air tool(2 pack), compatible with any gauge or air compressor using 1/4" NPT threading. L-type：1.34*0.63*1.77 inch.
Built to last from solid brass, corrosion-resistant. Presta Valve bicycle air chuck features straight angle to get in between spokes of tires to access valve stem with ease. Schrader Valve car air chuck with 90 degree body easy access to hard-to reach tire valve stems..
Straight air chuck engineered for bicycle tires that use Presta valve stem systems - including mountain bikes (MTB) and road bikes. L-type air chuck suitable Schrader valve tires for bicycles, motorcycles, and small and medium-sized vehicles..
Open flow technology air flow freely through chuck, no check valve. Perfect for inflating tires by using an attached air compressor, or simply checking pressure and deflating by using a compatible tire pressure gauge..
Package includes： 1 PC Presta Valve Tire Air Chuck.
1PC L-type Schrader Valve Tire Air Chuck.
A reasonable combination meets your different needs..
4Pcs 1/8' NPT Tank Valve, A.I.FORCE Air Compressor Tank Fill Valve with Anti-Corrosion Brass Schrader Valve and Caps, 4Pcs Extra Replacement Valve Stems Cores and Schrader Valve Tool
[WHAT YOU GET] – You will get 4Pcs 1/8" NPT Tank Valve with built-in Schrader valves and valve caps, 4Pcs Extra Replacement Valve Stems Cores and 1Pc Schrader Valve Tool..
[MAIN FUNCTION] – The air compressor box filling valves can prevent air from leaking out while allowing for air to pass through for inflation. The 4 extra Schrader Valves work for replacement valve core. With Schrader Valve Tool, we can tighten the valve core or replace Schrader Valve if there is a leakage..
[WIDE APPLICATION] - The 1/8" Male NPT Tank Valves are used for air compressor tanks to fill vessels with air. Through the Tank valve, we can fill up the vessels with our air compressors in a rapidly speed..
[SPECIFICATIONS] – The air tank valves with 1/8'' NPT Male Threads and Schrader Valve. Max working pressure 200psig and Do not Exceed Maximum pressure. Teflon or similar tape can be used during install on the threaded area that screws into the tank etc..
[HEAVY DUTY DESIGN] – The 1/8 schrader valves are made of solid brass, which is durable, rustproof and durable. Nickel plating valve stem core can effectively prevent rust and corrosion..
JEGS Small Block Chevy Vortec Cast Iron Cylinder Head | Made In USA | 1 Per Package | Straight Spark Plug | 1.94” Intake / 1.5” Exhaust Valve | 170cc Intake Ports | .475” Max Lift
FITS ALL 1955-Present GM small blocks except LT1, LT4, and LS1-style engines.
UTILIZES FAST BURN COMBUSTION CHAMBERS and high-velocity intake and exhaust ports.
PERFORMS GREAT RIGHT OUT OF THE BOX and can be mildly ported and milled up to 0.040 inch.
REQUIRES A VORTEC-STYLE INTAKE MANIFOLD to complete installation.
