Primefit CR1401G Replacement Air Regulator with steel-Protected Gauge, 1/4" Npt
Material: plastic and zinc alloy and copper.Maximum voltage: 240V.Maximum current: 15 amp.Maximum pressure: 180 psi, 12 bars..
Voltage (V): 240.Diameter of female thread: 1/4 PT.Features: Durable and useful..
Diameter:about 5.91inch-7.09inch(150mm -180mm). Size: 4.13 inch x 3.15 inch x 2.64 inch (105 x 80 x 67mm).Applicable compressor type:Piston compressor..
Easy to install and disassemble.With the barometer, can be set and read the data.With the valve button, you can adjust the atmospheric pressure as needed.Can help save electrical energy..
Strong plastic shell and excellent performance.The air compressor pressure switch is an extremely imperative element, it is used to install or connect the air compressor or trachea, to regulate the air pressure, to start up The main role of this valve is to regulate the stop and start pressure of the air compressor.
AstroAI Digital Tire Pressure Gauge with Presta Valve Adapter（4PCS）
DVANCED ACCURACY: Professionally calibrated to always return an accurate reading within 1% of the exact pressure of your tire. No more guessing! Accurately measures in a range from 3-250 PSI (0.2-17.2 Bar.
ALL-IN-ONE FEATURES: The LED backlit screen features measurements in PSI, KPA, Bar, and Kg/cm^2.
Includes an inflator, straight locking chuck, gauge, hose, and bleed valve, all in one unit.
Compatible with both ¼” and ½” NPT air compressors outputs.
CONVENIENT INFLATE: This presta valve adapter can convert your presta valve to schrader, so you can inflate your tire by a standard schrader pump and car air compressor. Much cheaper and less wasteful than buying a new tube!.
EASY TO INSTALL: Please loosen the tip of the presta valve to a suitable place, and take a few seconds to screw on the presta valve adapter, then connect to a schrader pump or air compressor to inflate..
PACKAGE：Tire Pressure Gauge with Presta Valve Adapter（4PCS）.
【 Portable Air Compressors】Air Compressor is equipped with four high pressure cylinder and can be compressed air maximum up to 20-30mpa/200-300bar/3000-4500psi, gauge pressure indicate, safe valve will be automatic leaking after full filling..
【Breathing Air Standard】This high quality air compressor can provide high-quality safe compressed air for human respiratory requirements for any industry that needs high-pressure pure gas source, meets the EU EN12021 and GB18435-2001 breathing air standard..
【110V Air Compressor】Air compressor consists of pump, motor, intake filter, belt, cool fan, oil separator & filter, safety valve, pressure switch, starter, frame, isolator etc, the Lubricate Oil we recommend that ISO grade 100/150..
【Paintball-compressor】Widely used in diving, fire fighting,outdoor construction,pipeline welding,container welding,scientific research and pressure testing,and laboratory,can also be used at PCP rifle paintball tanks..
JACO Bike Presta Valve Tire Air Chuck - 1/4" NPT (2 Pack) (Open Flow)
Open Flow - these Presta valve attachments are open flow, meaning air will flow freely through the chuck even if not engaged with the tire valve stem (no check-valve). Must be used with an inline tire inflator gauge or standard tire gauge (Not for DIRECT connection to air compressor hose)..
1/4 inch F-NPT fittings - feature a standard 1/4 inch F-NPT fitting, making them compatible with inline tire inflator tools and tire gauges..
Rugged & reliable - these straight angled Presta valve tire chucks are made of high-quality brass, providing a sturdy and reliable connection between your tire inflator tool and your bike tires..
Presta valve compatibility - the air chucks are specifically designed to work with presta valve equipped bike tires, allowing you to quickly and easily inflate your tires (NOT for Schrader valve types)..
Easy to use - simply attach them to any hand-operated, inline tire inflator tool connected to an air compressor hose, and start inflating your tires (NOT for use with floor pumps, hand pumps, or 12v air compressors)..
AC Compressor Control Solenoid Valve Replacement Compatible with VW Audi Sanden BOLT DOWN STYLE PXE16 PXE13 MK5
Highest quality control valve available GUARANTEED! Our valves use the highest quality materials. Be cautious of cheap valves as most are factory B stock from sanden and have an incredibly high failure rate!.
PLEASE PHYSICALLY CHECK YOUR A/C COMPRESSOR BEFORE ORDERING several different manufactures for the AC compressor were use! This solenoid is ONLY COMPATIBLE WITH SANDEN PXE16 PXE13 COMPRESSOR VALVE HELD IN WITH A BOLT!.
Compatible with many Volkswagen / Audi applications from 2006 + including Jetta and Golf TDI. The OEM and other aftermarket brand solenoid have an EXTREMELY high failure rate! Will cause intermittent / no AC issues.
WILL ONLY FIT SANDEN COMPRESSORS WITH VALVES HELD IN WITH A BOLT! PLEASE PHYSICALLY CHECK YOUR COMPRESSOR BEFORE ORDERING!.
JACO Lightning S2-Series Tire Air Chuck - 1/4\ F-NPT | Open Flow (2 Pack)
...e tire valve stem with absolutely ZERO air loss - eliminating any margin for error when precision matters..
EASIEST TO USE - 360 swivel head eliminates tension on your air hose & lets you make adjustments without air leaks. Laser-cut 1/4" F-NPT fittings allow for seamless compatibility w/ tire gauges, inflators, and compressor attachments..
OPEN FLOW - feature laser-cut threaded fitting (1/4 inch F-NPT) for compatibility w/ tire inflators & gauges to control air flow from compressor w/ precision for tire inflation (not recommended to attach directly to air compressor hose)..
BUILT TO LAST - engineered by the experts at JACO w/ over 35 years of experience in the industry, and proudly backed by our 100% Lifetime Warranty. Experience firsthand the most revolutionary advancements to air chucks ever made with our exclusive Lightning Technology..
Dreyoo Lock on Air Chuck, 1/4” FNPT Heavy Duty Closed Flow Tire Chuck for Tire Inflator Air Compressor Air Accessory Kit, Standard Bore Valve Stem Quick Connector for Valve Adapter (1)
Closed Flow: closed flow air chucks feature internal “check valves” that do not allow air to flow to or from the chuck unless the chuck is engaged with a tire valve stem, which makes them more efficient for using directly on an air compressor hose line, since they will not rapidly deplete the air tank unless engaged with a tire valve stem.
Easy to Use: pushed forward the sleeve to lock the valve stem and pulled back the sleeve to release the lock on air chuck, it makes things easy that you can use one hand to seal and release the chuck.
Standard Size: the top thread, 1/4 Inch FNPT.
Heavy Duty: the lock on air chuck, made of steel and zinc, can prevent rust.
The inside three claws are metal plating to protect them from oxidation.
Wide Use: the top thread is standard size 1/4 inch FNPT, fit for most tire inflator air compressor, air accessory kit, air compressor accessories, inflator gauge compressor accessories.
Acecare Charging Station Also Called Filling staion for Compressed air refilling
CONNECT. Connect compressor with valve to fill gases to tanks or pcp air guns..
WITH GAUGE. It is with gauge that shows the pressure in the tank or gun that receive the gases..
EASY TO INSTALL. It is easy to connect the valve and compressor, just very few steps..
WITH PRESSURE RELIEF KNOB. It is with pressure relief knob that will relief the rest pressure in hose to keep it safe when you take off it from valve..
WITH HOSE. The filling staion is with hose on it, and you do not need to prepare another hose when you fill gases..
The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500
... & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", One - 5/16" 18 x 3 1/2".
