Best Computer Power Supply p4 atx

24/20-Pin ATX DC Power Supply Diagnostic/Breakout Board Module

  • 24-pins Standard ATX Connector, support 20 / 20+4 / 24 pins wire header. With latching button switch to control ATX power supply output ON/OFF..
  • Total 16 LEDs, it is convenient for you to diagnose the functions of all pins except COM/GND, therefore, if the output of any one wire of your ATX power supply is faulty, it can be seen at a glance..
  • High quality screw terminal blocks. Each terminal position support current output maximum 10 Amp. Pitch 5.0mm/0.197 inch, Wire range 26AWG to 12AWG / 2.5mm square..
  • Packing list: 1x Diagnostic breakout board, 4x Screws, 4x Nylon spacers..
  • Special Note: The PS_ON LED lights up when the output is OFF and goes out when the output is ON, this is just the opposite of the indication status of other LEDs. Since many new ATX power supplies no longer provide output -5V, the NC/-V LED will not light up when connected to this type ATX power supply..
Check Stock

Computer PC Power Supply Tester 20/24 4/6/8 PIN for ATX, ITX, BTX, PCI-E, SATA, HDD, IDE with Aluminum Alloy Enclosure 1.8' LCD ATX Power Supply Tester

  • 【ATX Power Supply Tester】SAMFINTON computer power supply tester support 20-pin / 24-pin / HDD / Floppy 4-pin / PCI-e 6-pin / 4-pin / 8-pin / SATA connectors..
  • 【Aluminum Alloy Enclosure】Nice thermal conductivity & corrosion Resistance,with a high  strength housing. The computer power tester is more durable than the plastic case on the market..
  • 【Practical PC Power Tester】The 1.8inch LCD display intuitive and accurate display outputted Voltages (+/-0.01V), automatic fault alarm..
  • 【Normal】Turn on the power supply, will hear “DiDi” ring, If all groups of data are not flashing, the power supply output voltage is normal..
  • 【Faulty】If a certain voltage signal is not detected, or the detected voltage value exceeds the normal value, a long “beep” buzzer will be emitted.
  • if the corresponding voltage value or PG also flashes, it indicates a fault..
Check Stock

Aluminum MATX-Case Desktop PC-Case Tower-Chassis - Supporting ATX&SFX/SFX-L Power Supply/MATX& DTX&ITX Motherboard/360/240/120 Water Cooling& Air Cooling…

  • 【Small volume&large capacity】 With much Smaller Size compared with traditional Micro PC case but with big capacity and more hardware compatibility functions for personal computer home using, students &gamers.
  • 【Outstanding side Panel design】 Aluminum side panel seamless connected with half part of transparent tempered glass design makes the micro atx case standing out in many micro computer cases.
  • 【Unique installation design】 Support ATX&SFX/SFX-L power supply and support graphic cards with vertical installing(Charming lights can be seem) and side lying installing which attracts countless gaming case ITX, ATX &MATX gaming pc case lovers.
  • 【Exquisite workmanship】 All edage parts of the case is CNC polished by hand with exquisite workmanship. The hidden screw installation method makes the side panel smooth and exquisite, and allows ATX/mATX case fans to install the case tools free.
  • 【High efficent heat dissipation】 Can be installed with air cooling & 360/240/120 water cooling, making the heat dissipation performance much higher than ordinary Mid Tower ATX Case.
Check Stock

Genuine Dell 305w Power Supply PSU for Dimension 3100, E310, 5000, 5100, E510, 5150, E520, E521, and OptiPlex Towers GX320, GX520, GX620. Dell part numbers: W8185, M8802, M8805, M8806, X8129, C9962

  • P3 and P5 - 4-pin SATA standard power connector.
Check Stock

250 watt Pico PSU ATX Switch PSU Car Auto Mini-ITX Power Supply with Adapter Board for Computer Mainboard and car/Motorcycle

  • Note:input power 11.4V-12.6V,don't too low or highg,or will be damaged!Please read the Product Description before use!.
  • 250 Watt Pico PSU ATX High Mini-ITX Power Supply with adapter board.
  • Pico power supply Short-circuit protection: output shut down when short-circuit.
  • DC input connector: 2.5mm inner diameters, 5.5mm outer diameter.
  • The atx power supply with 24 pin ATX connector, Plugs directly into the ATX connector.
  • Perfect DC PSU for mini ITX Motherboards.
Check Stock

COMeap (2-Pack) 24 Pin Jumper ATX EPS PSU Power Supply Starter Bridge Tester Connector

  • Run and power up any ATX/EPS power supply.
  • Be available to power up PSU without motherboard.
  • Compatible with 24 pin and 20 pin ATX power supply.
Check Stock

Sanpyl ATX Motherboard Test Bench Best for Overclocking Test, ATX Computer Open Air Frame,Mini Aluminum DIY Computer Case for ATX

  • ATX MOTHERBOARD TEST BENCH: It is a Nude building blocks frame, lightweight and convenient disassembly, which can be stacked..
  • DIY ASSEMBL: ATX computer open air frame easily assembling with the simple structure, you can fully experience the fun of DIY..
  • GREAT HEAT-DISSIPATION: Open frame design has good heat dissipation performance. Support ATX ordinary large power supply..
  • PREMIUM AND DURABLE: ATX motherboard test bench made of high-quality 20* 20 aluminum alloy, steady for use..
  • AFTER SALES SERVICE: If there are any using problems or unsatisfactory with our products, please feel free to contact us, our professional customer service team will reply you within 24 hours, and we will consult the issues with sincerity. Thanks for purchasing from us..
Check Stock

Traovien SATA Cables, Dual PSU Power Supply 24-Pin Adapter Cable for ATX Motherboard 18AWG - 1FT

  • Allowing you to connect an additional PSU to your ATX motherboard.
  • Both PSU will be powered up by one single motherboard.Use a second PSU to power multiple graphics cards.
  • Compatible with 24 pin and 20+4 pin ATX motherboards (1x 24 pin(20+4) male port and 2x 24 pin female ports).
  • Designed for intense Gamining and BitCoin Mining.
  • Material: 18AWG . Length: main cable 12inches + secondary cable 12inches (30cm+30cm).
  • Dual PSU Power Supply 24-Pin Adapter Cable for ATX Motherboard sata cable 24 pin to 2420+4) pin sata cable JBingGG Dual PSU Power Supply 24 Pin (20+4) Adapter Cable for ATX Motherboard 12-inch ( 30cm ) (24 pin to 24(20+4) pin).
  • Note: Be sure to recognize the direction when inserting the cable!!! Dont insert the cable backwards or insert the wrong position to prevent the device from being burned!! When inserting the cable, hold the socket of the device before inserting the cable to avoid excessive force to insert the socket pin..
  • How to use: Plug the 24PIN of the main power supply into the female plug and plug the other end to the motherboard, and plug the secondary power supply into another 24PIN female plug to switch the power at the same time..
Check Stock

3pcs 24-Pin ATX Power Supply Jumper Bridge Connector PSU Tester

  • 24 Pin EPS / ATX power supply jumper bridge tool is compatible with 24/20 pin connector..
  • 24 Pin psu jumper bridge connector plug can run and start up any EPS / ATX power supply by its self..
  • 24 Pin power supply jumper is using Standard 18AWG UL1007 cable for reliability in long use..
  • Often used when assembling/testing liquid cooling systems, hard drives, fans, testing lights, BTC Miners or the power supply itself..
  • What You Get: 3x 24-Pin power supply jumper,.
Check Stock

TAYCCEU CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard, 9.5 inch/24cm

  • 【CPU Power Cable】EPS 12V CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable for Motherboard..
  • 【Easy to Install】EPS 12V CPU 8 Pin Female end to plug into 8 pin male to 8 pin male cable of power supply, CPU 8 pin and ATX 4 pin male ends to plug into the motherboard..
  • 【Compatibility】Compatible with all PSUs - ATX, SFX, Fanless PSU. Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket. It is availble to use the single CPU 8pin, single ATX 4 pin or both of CPU 8 pin + ATX 4 pin..
  • 【Specification】Length: 9.5 inch/24cm, Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs..
  • 【Note】This cable is a common power supply Y-splitter extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output. It needs to be connected to CPU 8 pin Male to Male Power Cable of PSU. Please use it correctly..
Check Stock